Products


Product Brand

Product Lines

Product Types

Product Applications

Markets

Clear All

Selected Filters:


  • 20/40 Broadcast Aggregate

    Features:

    Description:


  • A/D Firefilm III

    Features:

    • UL/ULC, ITS and ICC-ES Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
    • Advanced fiber free formulation - dust free surface.
    • Durable finish – Provides a hard, impact and abrasion resistant surface.
    • Topcoat finishes smooth to slight orange peel.
    • Thin film coating – space saving smaller column footprints.
    • Low VOC content.
    • LEED compliant

    Description:

    A/D Firefilm III is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes.


  • A/D Firefilm III C

    Features:

    • UL/ULC and ITS Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
    • Advanced fiber free formulation - dust free surface.
    • Durable finish – Provides a hard, impact and abrasion resistant surface.
    • Topcoat finishes smooth to slight orange peel.
    • Thin film coating – space saving smaller column footprints.
    • Low VOC content.
    • LEED compliant.
    • Extensive outgas testing for controlled cleanroom and sterile environments.

    Description:

    A/D Firefilm® III C is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes in clean room and sterile environments.


  • Accelerator A-20

    Features:

    Description:

    Accelerator A-20 is a powder mixed with water and injected into gypsum based fireproofing materials to reduce the set time and increase production rates. Also, Accelerator A-20 can be injected into portland cement-based fireproofing materials to reduce the set time. Accelerator A-20 can be used with Southwest Type 5GP, 5MD and 7GP materials.


  • Acrilast Caulk II

    Features:

    • Exterior rated
    • Durable finish - provides touch, flexible watertight bond with most construction materials
    • Easy application
    • VOC compliant
    • Wide application range - material may be applied over a wide temperature range, 40°F to 180°F (4°C to 82°C)
    • LEEDv4 & CDPH V1.1 compliant

    Description:

    Acrilast Caulk II is a gun-grade, neutral-cure silicone sealant designed for use in joint terminations of Pyrocrete® Fireproofing products and dissimilar materials.


  • Add-2 Mildewcide Additive

    Features:

    • EPA registered fungicide which inhibits the growth of mold & mildew on interior and exterior coatings
    • Blends into well into water-based, alkyd, and epoxy coatings
    • Long-lasting protection against mold & mildew
    • Versatile use in interior & exterior water-based, alkyd, and epoxy coatings
    • Will not affect color or performance of coatings
    • Conveniently packaged in a 10-gram, easy-to-dispense pouch
    • EPA Reg No. – 39967-43-71240
    • EPA Est. No. – 33967-NJ-01

    Description:

    ADD-2 Mildewcide Additive is an effective fungicide which provides long-lasting protection against both mold & mildew in water-based, alkyd, and epoxy coatings. It is also acceptable to use in polyurethane finishes but is less effective due to the slower leach rate. Ideal for contractor use in interior and exterior coatings projects.


  • Additive 101

    Features:

    • Additive 101 accelerates polyurethane cure rates and shortens dry film formation time within a wide range of application temperatures. In general, dry times can be decreased from 25-40% depending on the ambient conditions and substrate temperature. With the use of Additive 101, select Carboline 133 & 134 series polyurethanes will continue to cure at temperatures as low as 20°F (-7°C). Refer to specific product cure times for guidance.

    Description:

    Additive 101 is an accelerator used to speed the cure of many solvent-based polyurethane coatings. It can be used in Carboline’s Carbothane Series finishes including the 133 and 134 Series products and Clear Coats. DO NOT USE with water-borne polyurethanes.


  • Additive 47

    Features:

    Description:

    Styrene


  • Additive 8504

    Features:

    Description:

    Urethane accelerator


  • Additive 8505

    Features:

    • Additive 8505 accelerates atmospheric epoxy cure rates and shortens dry film formation time with a wide range of application temperatures. In general, dry times can be decreased from 25-40%, depending on the ambient conditions and substrate temperature. With the use of Additive 8505, select Carboguard products intended for atmospheric/non-immersion service will continue to cure at temperatures as low as 35 °F (2 °C); applicators shall be aware its use will also shorten pot life times by 40- 50%. Refer to product instructions and cure times for guidance.

    Description:

    Additive 8505 is an accelerator used to speed the cure of select atmospheric epoxies.


  • Additive 8506

    Features:

    Description:

    Epoxy accelerator


  • Additive 8509

    Features:

    Description:

    Urethane accelerator


  • American 5440-2 Novolac Lining

    Features:

    • High performance tank lining
    • Lower temperature cure
    • Faster return to service
    • Great overall chemical resistance
    • Great immersion temperature range

    Description:

    It is a high build advanced technology epoxy lining system designed for early-return-to-service use for petroleum refining industry. This product can be applied at temperatures as low as 35°F (2°C). Max working temperature is 300°F (149°C) in dry service.


  • American Coatings TL-1

    Features:

    Description:

    A two component, 100% solids product to minimize shrinkage and for laminating with fiberglass for a 62 mil lining system. A chemical resistant epoxy coating with exceptional adhesion to various substrates. Excellent resistance to petroleum products, alkalies, salts, organic solvents and gases.


  • American EX Series Primer

    Features:

    • Two component heavy duty primer
    • Good prime coat for high performance paint systems
    • Durable primer under insulation
    • Contains high performance rush inhibitors

    Description:

    One of the most durable primers known to industry. Excellent application properties are experienced over steel surfaces. This primer has excellent adhesion to steel and concrete also.


  • American SU FC Series Urethane

    Features:

    • Fast cure
    • High impact resistance
    • Excellent long term gloss retention
    • Excellent chemical resistance
    • Cures at temperatures as low as 40°F (4°C)

    Description:

    Formulated from high performance acrylic resins. This product is known for its excellent gloss retention properties and excellent resistance to a variety of solvents, acids and bases. Can cure in environments as low as 40°F (4°C).


  • Armorlast I

    Features:

    • Ultra-long corrosion protection when applied over Carbozinc 11 Series inorganic zinc primers
    • Extremely fast throughput in fabrication shops
    • Can be applied over Carbozinc 11 or Carbozinc 11 HS after as little as two hours cure
    • Cures to handle quickly at ambient temperature
    • Outstanding weatherability
    • Isocyanate free
    • Meets Class B Slip Co-Efficient over approved primer
    • Exceeds ISO 12944-9 CX testing criteria as part of a two coat inorganic system

    Description:

    Armorlast I is a high solids, high build inorganic topcoat used to seal and protect inorganic zinc primers. The film exhibits exceptional toughness, high temperature resistance, and is available in a limited assortment of colors. Being inorganic, Armorlast I provides exceptional weatherability and long-term performance. When used as finish over a permanent zinc primer, the system becomes an ultra-long lasting corrosion resistant system.


  • Bitumastic 300 M

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 16-24 mils (400-610 microns) in a single coat (up to 35 mils with force curing)
    • Compatible with controlled cathodic protection
    • Suitable for use in exposures as referenced in the following specifications:
    • Corp of Engineers C-200, C200a
    • AWWA C-210 for exterior
    • SSPC-Paint 16
    • Steel Tank Institute Corrosion Control System STI-P3
    • Approved MPI #35

    Description:

    Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.


  • Bitumastic 300 M COE

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 12-14 mils (300-350 microns) in a single coat
    • Compatible with controlled cathodic protection
    • Meets Corps of Engineers C200, C200a specification
    • Suitable for use in exposures as referenced in the following specifications: SSPC-Paint 16 & Steel Tank Institute Corrosion Control System STI-P3

    Description:

    Renowned high build coal tar epoxy for protection for steel and concrete in single or two-coat applications developed specifically for the Corps of Engineers (COE).


  • Bitumastic 50

    Features:

    • Application up to 30 dry mils (750 microns) in a single coat
    • Self priming, single-coat capabilities
    • Excellent corrosion resistance
    • Complies with MIL-C-18480-B and Bureau of Reclamation CA50 specifications

    Description:

    Ultra-high build, single-component coal tar mastic for protecting steel and concrete substrates subject to aggressive conditions and for below grade damp proofing requirement


  • Carbocoat 115

    Features:

    • Rapid cure
    • VOC compliant for most areas
    • Good for filling properties on rough and pitted steel
    • Fast dry to handle properties

    Description:

    Fast drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. May be topcoated with conventional alkyds or acrylics for color, aesthetics or additional protection.


  • Carbocoat 115 VOC

    Features:

    • Fast Dry
    • VOC compliant to 340 g/l

    Description:

    Carbocoat 115 VOC is a fast drying, low VOC industrial maintenance, lead and chromate free, shop and field primer. It is especially designed for architectural ferrous metal or exposed structural steel, and is best applied by spray only. Carbocoat 115 VOC can be top coated with acrylics, alkyds or single package polyurethane finishes. It is often used as a construction primer for structural steel that will eventually reside in interior spaces.


  • Carbocoat 116

    Features:

    • Fast Dry
    • VOC compliant less than 250 g/l

    Description:

    Fast drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. May be topcoated with conventional alkyds and acrylics for color, aesthetics, or additional protection.


  • Carbocoat 150 Universal Primer

    Features:

    • Corrosion resistant coating with zinc phosphate corrosion inhibitor
    • Good for extended exposure demands
    • Heavy-metal free
    • VOC compliant for most areas
    • Accepts wide range of topcoats

    Description:

    Heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.


  • Carbocoat 2600

    Features:

    • Excellent weathering characteristics
    • Calcium sulfonate and other unique rust-inhibitive pigments
    • High solids allows for single coat applications
    • Single component
    • Pre-thinned; ready-to-apply
    • VOC-compliant for most areas

    Description:

    Single-coat primer/finish with unique ion-exchange corrosion inhibitors frequently used as a metallic - finish maintenance coating for aged galvanized and rusty steel. Slow drying characteristics allow for excellent wetting and penetration to hand or power tooled cleaned surfaces. Frequently used in the Power, Transmission/Distribution and Bridge markets.


  • Carbocoat 2901

    Features:

    • Good corrosion protection and weatherability
    • Ion exchange corrosion protection
    • Excellent application properties
    • Single component
    • Pre-thinned; ready-to-apply
    • VOC-compliant for most areas

    Description:

    Single-component metallic-finish maintenance coating formulated with a unique pigment system that inhibits corrosion through ion exchange technology. Self-priming, fast dry characteristics well suited for the Power, Transmission/Distribution and Bridge markets.


  • Carbocoat 30

    Features:

    • Versatile multi-purpose coating
    • 30% silicone content
    • Tough, high gloss finish
    • Excellent application properties
    • VOC-compliant for most areas
    • Excellent brush/roll/spray properties
    • Outstanding flow and leveling

    Description:

    High solids, high gloss, finish with 30% silicone modification that provides excellent weathering performance as an exterior enamel. Can also be used interior as a high gloss maintenance product with ease of use characteristics


  • Carbocoat 75

    Features:

    • Smooth, attractive, high gloss finish
    • Direct-to-metal application if desired
    • Good weatherability, color and gloss retention
    • Good corrosion resistance
    • Good application characteristics
    • Good durability

    Description:

    A general purpose air dry enamel that can be used as a self-priming direct to metal (DTM) finish coat. This product has good application characteristics and good corrosion resistance. It can be used for light to moderate industrial and marine service for both maintenance and new construction projects. It can also be used as an OEM finish for a variety of applications.


  • Carbocoat 8215

    Features:

    • Smooth, attractive, semi-gloss finish.
    • Direct-to-metal application if desired.
    • Good weatherability, gloss and color retention.
    • Contains corrosion inhibitor.
    • Excellent application characteristics.
    • Quick dry to handle times
    • Good flexibility
    • Impact and abrasion resistant
    • VOC-compliant for most areas

    Description:

    A high solids, quick-dry, general purpose air dry enamel that is used as a self-priming finish coat. Carbocoat 8215 has exceptional application characteristics, fast dry properties and very good corrosion protection as a direct to metal coating. Is used as an OEM finish for a variety of applications. It Is also recommended for light to moderate industrial use for new construction or maintenance.


  • Carbocoat 8215 VOC

    Features:

    • Smooth, attractive, semi-gloss finish
    • Direct-to-metal application if desired.
    • Good weatherability, gloss and color retention
    • Contains corrosion inhibitor
    • Excellent application characteristics.
    • Quick dry to handle times
    • Good flexibility
    • Impact and abrasion resistant
    • VOC-compliant for most areas
    • HAP’s = 0.6 lbs/solid gallon

    Description:

    A high solids, quick-dry, general purpose air dry enamel that is used as a self-priming finish coat. Carbocoat 8215 VOC has exceptional application characteristics, fast dry properties and very good corrosion protection as a direct to metal coatings. Is used as an OEM finish for a variety of applications. It Is also recommended for light to moderate industrial use for new construction or maintenance. It meets the 340 g/l VOC limit and has very low HAP’s at 0.6 lbs/solid gal.


  • Carbocoat 8216 Non-Skid

    Features:

    • Non-skid finish
    • Direct-to-metal application if desired.
    • Good weatherability, gloss and color retention
    • Contains corrosion inhibitor
    • Excellent application characteristics.
    • Quick dry to service times
    • Good flexibility
    • Impact and abrasion resistant
    • VOC-compliant for most areas

    Description:

    A high solids, quick-dry, general-use, air dry enamel that is used as a self-priming, non-skid finish for light duty to medium use foot traffic. High profile aggregate provides very good non-slip properties. This product has exceptional application characteristics, fast dry properties and very good corrosion protection as a direct to metal coating.


  • Carbocoat 8229 Non-Lift Primer

    Features:

    • Good for extended exposure demands
    • Ability to be welded through
    • Heavy-metal free
    • VOC compliant for most areas
    • VOC = 2.3 lbs/gallon
    • Meets the requirements of Class A Slip Coefficient testing

    Description:

    Heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.


  • Carbocoat 8239

    Features:

    • Good corrosion protection for interior and exterior exposures
    • Universal primer - accepts solvent borne topcoats
    • Approved for MPI #76
    • Approved for MPI #79
    • Fast dry to handle and topcoat
    • Zero HAP's
    • VOC compliant for most areas
    • Low odor
    • Meets the requirements of the Steel Door Institute (ANSI/SDI A250.10)

    Description:

    Zero HAP's, fast dry corrosion inhibitive universal alkyd primer. May be top coated with a variety of finishes, including alkyd, epoxy, polyurethanes, as well as conventional coatings. Can be used for interior or exterior service as a prime for atmospheric protection. Applications on iron, steel and many other metals.


  • Carbocoat 8259 WR

    Features:

    • Fast-dry
    • Corrosion resistant
    • Low VOC
    • Reduce and clean up with water
    • Direct to metal capability
    • Flash rust resistant
    • Surface tolerant

    Description:

    This fast dry water reducible alkyd finish is designed for spray, brush or roller application to metallic surfaces. It offers ease of application, excellent gloss retention, and corrosion resistance. It is intended for industrial use on bare metal or primed surfaces where mild corrosion resistance is needed.


  • Carbocoat 8287 WR

    Features:

    • Fast-dry
    • Corrosion protection
    • Contains zinc phosphate (red only)
    • Flash rust resistant
    • Surface tolerant
    • Low odor
    • Low-VOC

    Description:

    This fast dry water reducible alkyd primer is designed for spray, brush or roller application for metallic surfaces and may be used as a universal primer. It offers ease of application, superior adhesion, retention, and extreme flexibility. It is easy to apply and offers superior sag resistance and sheen uniformity.


  • Carbocrete 4000

    Features:

    • Easy to mix
    • Quick cure allows for rapid system install
    • Hygienic
    • Trowel Applied
    • Can be installed up to 4” thick
    • Flexible

    Description:

    A trowel-applied, fast cure and high performance cement base underlayment for sloping and patching floors. Can be overcoated with a variety of finishes including tiles, vinyl and polymer flooring. Protein-free formulation prevents the growth and spread of bacteria


  • Carbocrete 4010

    Features:

    • Low Shrinkage
    • High Bond Strength
    • Excellent freeze-thaw resistance
    • Low permeability
    • Above and below grade applications
    • Quick recoat time (6 hours @ 70°F)
    • Certified by UL to meet the drinking water criteria of NSF 61

    Description:

    Carbocrete 4010 is a quick-setting, fiber reinforced, single component mortar formulated for vertical and overhead concrete repairs.


  • Carbocrete 4020

    Features:

    • Non-shrink
    • High-Build
    • High Bond Strength
    • Good Flexural Strength
    • Excellent Freeze-Thaw Resistance
    • Low Permeability
    • Resists External Hydrostatic Pressure

    Description:

    Carbocrete 4020 is a high-strength, microsilica modified repair mortar designed to repair and resurface deteriorated concrete surfaces exposed to severe and aggressive environments. Ideal for vertical, horizontal, and overhead applications, the dense design matrix provides low permeability, restores structural integrity, and can withstand environments with a pH of 3 or higher.


  • Carbocrylic 1295 HS

    Features:

    • Isocyanate free
    • Provides excellent corrosion protection
    • Provides good weathering protection
    • NORSOK Standard M501 approved for offshore service
    • Recommended for use in many challenging service conditions

    Description:

    Carbocrylic 1295 HS is a high solids topcoat with good weathering capabilities. It provides a glossy, smooth, hard finish that is easy to clean and can be applied in one coat for many service conditions.


  • Carbocrylic 3350

    Features:

    • Excellent performance over inorganic zinc primers
    • Superior color and gloss retention
    • Single component
    • Spray, brush and roll
    • Low odor, low VOC
    • Very good filling properties for masonry surfaces

    Description:

    Versatile coating with excellent performance properties. Frequently used in the bridge market as a finish coat over inorganic zinc primers, as well as a user-friendly finish for numerous other substrates. Various off-white colors such as S800 made with our rapid tint system or package colors may be used as a block-filler.


  • Carbocrylic 3357 HB

    Features:

    • Smooth, attractive, high build finish
    • Excellent weatherability, gloss and color retention
    • Low odor, low VOC
    • Excellent corrosion protection when coupled with the appropriate primer
    • Outstanding application characteristics
    • Single component

    Description:

    A high build waterborne acrylic with excellent weatherability and corrosion resistance when coupled with the appropriate primer.


  • Carbocrylic 3358

    Features:

    • Single component
    • Resistant to flash rusting
    • Outstanding corrosion protection
    • Low odor, low VOC

    Description:

    Surface tolerant direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP2 and SP3-cleaned steel.


  • Carbocrylic 3358 MC

    Features:

    • Single component
    • Resistant to flash rusting
    • Outstanding corrosion protection
    • Low odor, low VOC*

    Description:

    Surface tolerant direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP2 and SP3-cleaned steel. May also be used as a primer or block filler over concrete masonry units. Acceptable for use on LEED projects.


  • Carbocrylic 3358-G

    Features:

    • Single component
    • Resistant to flash rusting
    • Outstanding corrosion protection
    • Graphite reinforced
    • Excellent acid splash/fume resistance
    • Low odor, low VOC

    Description:

    High performance graphite reinforced direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP3 and SP6-cleaned steel. Formulated specifically for chemical resistance to acids and chemicals.


  • Carbocrylic 3359

    Features:

    • Multi-purpose interior/exterior coating
    • Excellent color and gloss retention
    • Single component
    • Outstanding corrosion protection
    • Low odor, low VOC
    • Acceptable for use in USDA facilities

    Description:

    Versatile high performance finish with excellent corrosion resistance and exterior weathering properties.


  • Carbocrylic 3359 DTMC

    Features:

    • Smooth, attractive, high build finish
    • Excellent weatherability, gloss and color retention
    • Low odor
    • Excellent corrosion protection
    • Meets most VOC regulations
    • Excellent resistance to flash rusting
    • Outstanding application characteristics
    • Dry-fall* properties
    • Excellent adhesion to FBE

    Description:

    A single component durable, high performance direct-to-metal acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for light to medium duty service on tank exteriors, piping, and structural steel. May also be used as a finish coat over recommended primers.


  • Carbocrylic 3359 Flat

    Features:

    • Multi-purpose interior/exterior coating
    • Excellent color retention
    • Single component
    • Outstanding corrosion protection
    • Low odor, low VOC

    Description:

    Versatile high performance finish with excellent corrosion resistance and exterior weathering properties, as well as suitability for interior and mild environments.


  • Carbocrylic 3359 MC

    Features:

    • Multi-purpose interior/exterior coating
    • Excellent color and gloss retention
    • Single component
    • Outstanding corrosion protection
    • Low odor, low VOC*

    Description:

    Versatile high performance finish with excellent corrosion resistance and exterior weathering properties, as well as suitability for interior and mild environments.


  • Carboglas 1601 SG

    Features:

    • Outstanding marine exposure resistance (atmospheric, tidal, subsea)
    • Excellent resistance to both organic and mineral acids
    • Excellent abrasion and impact resistance
    • Excellent resistance to bleach solutions and free chlorine
    • Outstanding long-term protection

    Description:

    This extremely durable and chemically resistant cladding utilizes a multi-step curing process that incorporates chemically-fused glass flake reinforcing in a highly cross-linked polyester matrix. The resultant layer is an extremely durable barrier against a variety of exposures including marine, fresh water, salt water, both mineral and organic acids, bleach solutions, and free chlorine. The multi-layer glass-flake reinforcement greatly impedes the penetration of water and other corrosives making this system extremely long performing.


  • Carboguard 1207

    Features:

    • Superior abrasion resistance
    • Excellent resistance to aerated seawater and various other chemicals
    • Excellent immersion performance
    • Easy to repair
    • VOC compliant to current AIM regulations

    Description:

    Ultra-durable solvent-free coating for use on steel and concrete substrates subject to severe impact and physical abuse. This aggregate filled coating offers exceptional abrasion resistance in heavy-duty marine and splash zone environments. It is ideal for high abuse areas on offshore structures exposed to aerated sea water (splash zone), boat landing areas, or working decks, lay down areas, helidecks, or walkways. It can be also be used for buried pipe due to its outstanding physical durability. Consult Carboline Tech Service for high profile non-skid applications.


  • Carboguard 1209

    Features:

    • Excellent abrasion resistance
    • Excellent chemical resistance
    • Outstanding impermeability
    • Single coat, self-priming capabilities
    • VOC compliant to current AIM regulations
    • Non-skid surface (optional)

    Description:

    Dense, highly impermeable glass flake-filled coating used for protecting steel and concrete. This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Optional use of light or course grit fillers provides nonskid properties.


  • Carboguard 1340

    Features:

    • Exceptional wetting characteristics
    • Low stress, highly flexible film
    • Very high solids
    • Low odor
    • User-friendly brush & roller application
    • VOC compliant to current AIM regulations

    Description:

    Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. When applied to “green” concrete it will retard the escape of moisture during the cure period. It is also excellent for use as a form release coating on plywood or steel forms.


  • Carboguard 1340 WB

    Features:

    • Has excellent adhesion to concrete
    • Can be used over dry or damp concrete
    • Provides improved bond to damp concrete
    • Low odor; Low VOC
    • Fast dry to topcoat

    Description:

    Carboguard 1340 WB is a two component, waterborne epoxy primer used as a primer/sealer for concrete substrates. It promotes the adhesion of a variety of topcoats including polyurethane/polyurea elastomers. It can be used on dry or damp concrete. It is particularly effective to prime damp concrete substrates prior to the application of topcoats that might otherwise be compromised by any surface moisture.


  • Carboguard 1340N

    Features:

    • Exceptional wetting characteristics
    • Low stress, highly flexible film
    • Very high solids
    • Low odor
    • User-friendly brush & roller application
    • VOC compliant to current AIM regulations
    • Suitable for use in Nuclear Service Level 1

    Description:

    Penetrating primer/sealer for use on concrete substrates. It is a nuclear grade, DBA tested and certified for use in Nuclear Level 1 areas in a variety of systems with appropriate finish coats.


  • Carboguard 163

    Features:

    • Excellent adhesion to prepared steel & concrete surfaces
    • Excellent abrasion resistance
    • Excellent flexibility; will withstand the expansion and contraction effect encountered in large storage/processing facilities
    • Does not require a primer or a topcoat (self-priming)
    • Designed for application using plural component, airless spray equipment
    • Versatile Application with both Plural Component or Standard Airless Spray Equipment
    • May be applied via batch mixing with care

    Description:

    A high-build, modified epoxy lining with good overall chemical resistance and versatility. It is can be used as a “caulk” for application in tanks for transition areas, floors and walls, lap welds, pitted steel, bolts, etc. It is ideal for the relining or reconditioning of older tanks. It has excellent flexibility and its spray-applied capability (plural component) makes it unique over other similar products that usually require hand lay-up/trowel application. Carboguard 163 can be used as a barrier coat for concrete or steel surfaces that are exposed to moderately corrosive environments. Applications include floors, piping, storage, tanks, and process vessels in oil refineries, chemical processing, and wastewater treatment plants.


  • Carboguard 235

    Features:

    • Surface tolerant properties
    • Excellent as a ballast tank lining
    • Fast and low-temperature cure
    • Excellent general service epoxy
    • Excellent maintenance primer

    Description:

    Carboguard 235 is a phenalkamine modified, surface-tolerant, epoxy specially formulated for application in marine and other severe service industrial environments and is suitable for fresh and salt water immersion resistance. This high solids, high performance epoxy is application friendly and can be used at low temperatures down to 20°F.


  • Carboguard 235 HAR

    Features:

    • High abrasion resistance
    • Surface tolerant properties
    • Fast and low-temperature cure
    • Outstanding as a heavy duty hull coating for marine

    Description:

    Carboguard 235 HAR is a high abrasion resistant phenalkamine modified, surface-tolerant, epoxy specially formulated for application in marine and other severe service industrial environments and is suitable for fresh and salt water immersion resistance. This high solids, high performance epoxy is application friendly and can be used at low temperatures down to 20°F.


  • Carboguard 501

    Features:

    • Solvent free
    • Excellent film strength, abrasion, and impact resistance
    • Rapid hardening for quick service
    • Easy to mix ratios
    • Excellent film build and working properties

    Description:

    Epoxy patching and surfacing compound that exhibits excellent bond strength and chemical resistance to a variety of acids, alkalies, salt solutions and oils. It is used to fill voids and bugholes in precast or poured-in-place concrete and other masonry surfaces. Repairs damaged concrete, fills narrow cracks, and can be used as a coving material for floor-wall transitions or lap joint areas. May also be used to repair weld seams and pits in metal for potable water service with a compatible ANSI/NSF 61 approved lining.


  • Carboguard 510

    Features:

    • Epoxy modification improves chemical resistance for wastewater environment
    • Water based, low odor
    • Can be used if the substrate is saturated surface damp or "SSD"
    • Excellent film strength, abrasion, and impact resistance
    • Is castable, making it suitable for restoring pump foundations
    • Easily topcoated to provide additional chemical resistance or appearance
    • Used as a primer by mixing Parts A and B only - no sand, cement or aggregates
    • Topcoated with Carboline's lining systems provides protection from H2S or MIC

    Description:

    An economical water-based epoxy primer or resurfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. As a mortar it is ideally suited for patching spalled concrete, filling large cracks, or as a coving and sloping material for floor-wall transitions.


  • Carboguard 510 SG

    Features:

    • Epoxy modification improves chemical resistance for wastewater environment
    • Trace VOC
    • Water based, low odor
    • Excellent film strength, abrasion, and impact resistance
    • Easily topcoated to provide additional chemical resistance or appearance
    • Self-priming over concrete
    • Aggregate reinforced

    Description:

    A spray-grade, economical, epoxy-based repair mortar, patching and surfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. It is ideally suited for resurfacing deteriorated concrete in wastewater environment. Topcoated with Carboline's lining systems provides protection from H2S or MIC. Unique spray grade (SG) formulation speeds application properties for quick turnaround projects.


  • Carboguard 553

    Features:

    • Low odor
    • Very low VOC
    • Fast drying
    • Excellent corrosion protection
    • Very good chemical resistance
    • Contains corrosion inhibitive pigments

    Description:

    A water based epoxy primer that is easy to apply and has very good chemical resistance. Carboguard 553 primer has significant improvements in film hardness and toughness over straight acrylic or acrylic-epoxy systems. It provides better chemical resistance and physical properties. It can be used in more moderate to aggressive exposures.


  • Carboguard 571

    Features:

    • Single coat, high performance protection
    • High build capabilities in one coat
    • Excellent corrosion protection
    • Low odor during application; zero odor after cure
    • Fast dry, rapid cure with low temperature bake
    • Excellent impact and abrasion resistance
    • Complies with FDA 21CFR 175.300 criteria for food contact
    • VOC compliant to current AIM regulations

    Description:

    Solvent-free plural component-applied coating commonly used for tank lining applications in the rail industry (corn syrup cars) and other in-shop applications where single-coat and fast handling capabilities are primary requirements.


  • Carboguard 60

    Features:

    • Laboratory qualified for multiple ISO 12944 atmospheric-corrosivity categories
    • Low odor and low VOC
    • Available in a variety of rapid tint colors*
    • Attractive medium sheen for tank exteriors
    • Good chemical resistance
    • Used as a primer, intermediate, or finish coat
    • Fast cure & dry times
    • Can be applied over power tool cleaned surfaces
    • VOC compliant to current AIM regulations
    • Good abrasion resistance
    • Approved MPI #108

    Description:

    Carboguard 60 is a high solids, versatile, abrasion resistant, chemical resistant, and corrosion resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. This product has excellent wetting properties giving it the capability of going over marginally prepared substrates. It is ideal for maintenance and fabrication shop applications. An optional Glass Flake (GF) additive or micaceous iron oxide (MiO) additive can be purchased separately and may be used to enhance film strength for more abusive applications for severe marine or heavy industrial uses. Consult Technical Service for suitability as a lining or other exposures.


  • Carboguard 60 LH

    Features:

    • Versatile epoxy for atmospheric or immersion exposures
    • Outstanding corrosion protection in marine/sea water environments
    • Meets IMO Performance Standard for Protective Coatings MSC.215 (82): 2006 for sea water ballast tanks
    • Excellent film build and edge protection
    • Self-priming system
    • Ready to apply after mixing; (no sweat-in time)
    • Low HAPs content

    Description:

    Carboguard 60 LH is a high solids, versatile corrosion resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. This product has excellent wetting properties giving it the capability of going over marginally prepared substrates. It is ideal for maintenance and fabrication shop applications. It is suitable for immersion conditions in fresh and salt water (pre-qualified for NORSOK M501 System 7B). Meets IMO performance for ballast tanks for marine vessels. An optional Glass Flake (GF) additive or micaceous iron oxide (MiO) additive can be purchased separately and may be used to enhance film strength for more abusive applications for severe marine or heavy industrial uses. See separate data sheets.


  • Carboguard 60 Tank White

    Features:

    • Low odor and low VOC
    • Available in self-cleaning white
    • May be used as a primer, intermediate, or finish coat
    • Fast cure & dry times
    • Can be applied over power tool cleaned surfaces
    • VOC compliant to current AIM regulations

    Description:

    Carboguard 60 Tank White is a specially formulated high solids, versatile corrosion resistant coating designed for use as a weathering finish for exterior use. It has the unique ability to freely chalk on UV exposure to maintain a white appearance over its useful life making it ideal for tank exteriors and the like for both new construction or maintenance.


  • Carboguard 6250 N

    Features:

    • Single coat application reduces labor costs
    • Ultra-high build capabilities provides a void-free film and excellent edge protection
    • Application by airless spray or plural component equipment
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, ultra-high build coating designed for use on nuclear torus lining applications (a torus is a doughnut-shaped storage area for cooling water). Carboguard 6250 N is designed to handle exposures inside nuclear containment facilities (Level 1) for both radiation tolerance and film integrity during a loss of coolant accident (LOCA).


  • Carboguard 635

    Features:

    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks

    Description:

    An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Can be used direct to metal as a corrosion resistant primer, an intermediate coating over itself and many other primers, and can be used as a finish coat. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in fresh or salt water (marine) exposures. Meets IMO performance for ballast tanks for marine vessels.


  • Carboguard 635 HAR

    Features:

    • High abrasion resistance
    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Meets VOC restrictions

    Description:

    A highly abrasion resistant, all-purpose epoxy with a variety of attributes including low-temperature cure, surface tolerance, fast re-coat times, moisture tolerance during application and cure, and excellent corrosion protection. Carboguard 635 HAR can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers particularly where abrasion resistance is needed. It is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. It may also be used for immersion in fresh or salt water (marine) exposures.


  • Carboguard 635 VAR

    Features:

    • High abrasion resistance
    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Meets VOC restrictions

    Description:

    A highly abrasion resistant, all-purpose epoxy with a variety of attributes including low-temperature cure, surface tolerance, fast re-coat times, moisture tolerance during application and cure, and excellent corrosion protection. This product can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers particularly where abrasion resistance is needed. It is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. It may also be used for immersion in fresh or salt water (marine) exposures.


  • Carboguard 635 VOC

    Features:

    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Low VOC and low HAPs content
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
    • Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks

    Description:

    An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. It has low VOC and low HAP's content for use in areas with restricted volatile emissions. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in potable water, fresh or salt water (marine) exposures.


  • Carboguard 690

    Features:

    • High solids, low VOC
    • High build (16 mils)
    • Low temperature cure (20°F)
    • Excellent moisture tolerance during application
    • Continues to cure underwater
    • Fast cure response
    • Suitable for use in USDA inspected facilities

    Description:

    High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used on structural steel, piping, tankage, and equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects; and is ideal for coatings under insulation up to 300°F (149°C).


  • Carboguard 690 GF

    Features:

    • High solids, low VOC
    • High build (20+ mils)
    • Low temperature cure (20°F)
    • Excellent moisture tolerance during application
    • Continues to cure underwater
    • Fast cure response
    • Excellent physical and barrier properties

    Description:

    High performance, glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Glass flake reinforcement enhances film strength, impact resistance and barrier properties. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects.


  • Carboguard 820

    Features:

    • High solids, low VOC
    • Low temperature cure down to 20°F(-7°C)
    • Fast cure response
    • Long recoat window
    • ISO 12944 C5 VH qualified as part of a system
    • ISO 12944 CX qualified as part of a system

    Description:

    An epoxy intermediate coat that demonstrates low temperature curing capabilities, fast recoat times, great application properties, and long-term corrosion protection for valuable assets. As a part of an approved coating system, Carboguard 820 is suitable for the harshest environments, including offshore (ISO 12944-9 CX).


  • Carboguard 824

    Features:

    • Immersion grade epoxy
    • Excellent for harsh marine or industrial exposures
    • Qualified under MIL-DTL-24441D Type IV

    Description:

    Carboguard 824 is a VOC compliant, two coat, epoxy polyamide system for use where marine coating regulations are restricted to a maximum VOC of 340 g/l or 2.8 lb/gal. The system is specifically formulated for use in immersion service; it is highly versatile and may also be used as an intermediate coating for a variety of industrial applications. Carboguard 824 is for use over properly prepared steel and aluminum substrates that will be subject to exposure in harsh industrial and marine environments.


  • Carboguard 824 (F-156)

    Features:

    • Immersion grade epoxy
    • Excellent for harsh marine or industrial exposures
    • Qualified under MIL-DTL-24441D Type IV

    Description:

    Carboguard 824 is a VOC compliant, two coat, epoxy polyamide system for use where marine coating regulations are restricted to a maximum VOC of 340 g/l or 2.8 lb/gal. The system is specifically formulated for use in immersion service; it is highly versatile and may also be used as an intermediate coating for a variety of industrial applications. Carboguard 824 is for use over properly prepared steel and aluminum substrates that will be subject to exposure in harsh industrial and marine environments.


  • Carboguard 824 (F-160)

    Features:

    • Immersion grade epoxy
    • Excellent for harsh marine or industrial exposures
    • Qualified under MIL-DTL-24441D Type IV

    Description:

    Carboguard 824 is a VOC compliant, two coat, epoxy polyamide system for use where marine coating regulations are restricted to a maximum VOC of 340 g/l or 2.8 lb/gal. The system is specifically formulated for use in immersion service; it is highly versatile and may also be used as an intermediate coating for a variety of industrial applications. Carboguard 824 is for use over properly prepared steel and aluminum substrates that will be subject to exposure in harsh industrial and marine environments.


  • Carboguard 824 Primer (F-150)

    Features:

    • Immersion grade epoxy
    • Excellent for harsh marine or industrial exposures
    • Qualified under MIL-DTL-24441D Type IV

    Description:

    Carboguard 824 is a VOC compliant, two coat, epoxy polyamide system for use where marine coating regulations are restricted to a maximum VOC of 340 g/l or 2.8 lb/gal. The system is specifically formulated for use in immersion service; it is highly versatile and may also be used as an intermediate coating for a variety of industrial applications. Carboguard 824 is for use over properly prepared steel and aluminum substrates that will be subject to exposure in harsh industrial and marine environments.


  • Carboguard 868 Non-Skid

    Features:

    • Excellent film build properties
    • Non-skid finish
    • Excellent edge retention

    Description:

    Carboguard 868 Non-Skid is a two component, polyamide modified, low VOC, high performance coating for demanding industrial maintenance, marine and architectural applications. It is a tough and durable satin finish ideal for use on steel, galvanized, aluminum and masonry. It should be used wherever non-skid properties, chemical and abrasion resistance, resistance to corrosive environments and outstanding adhesion are essential. It is suitable for use in refineries, offshore platforms, marine environments, chemical plants, food & beverage plants and pulp & paper mills or other industrial applications.


  • Carboguard 869 Non-Skid

    Features:

    • Easy mix; non settling; 2-component
    • Constant agitation not required during installation
    • Short sweat-in time; long pot life
    • Unique aggregate package for improved nonslip properties
    • Dry hard overnight
    • Excellent film build properties

    Description:

    Carboguard 869 Non-Skid is a two component, polyamide modified, low VOC, high performance coating for demanding industrial maintenance, marine and architectural applications. It is a tough and durable satin finish perfect for use on steel, galvanized, aluminum and masonry. It has a unique non-skid filler package which requires no agitation during application. In spite of its apparent lower profile aggregate, it has improved non-slip properties over larger aggregate materials, even when wet. It has excellent chemical and abrasion resistance, particularly in marine or other corrosive environments. It is suitable for use on properly prepared concrete & steel surfaces in refineries, offshore platforms, chemical plants, food & beverage plants and pulp & paper mills.


  • Carboguard 869 Non-Skid LT

    Features:

    • Easy mix; non settling; 2-component
    • Constant agitation not required during installation
    • Short sweat-in time; long pot life
    • Unique aggregate package for improved nonslip properties
    • Dry hard overnight
    • Excellent film build properties

    Description:

    Carboguard 869 Non-Skid is a two component, polyamide modified, low VOC, high performance coating for demanding industrial maintenance, marine and architectural applications. It is a tough and durable satin finish perfect for use on steel, galvanized, aluminum and masonry. It has a unique non-skid filler package which requires no agitation during application. In spite of its apparent lower profile aggregate, it has improved non-slip properties over larger aggregate materials, even when wet. It has excellent chemical and abrasion resistance, particularly in marine or other corrosive environments. It is suitable for use on properly prepared concrete & steel surfaces in refineries, offshore platforms, chemical plants, food & beverage plants and pulp & paper mills.


  • Carboguard 876

    Features:

    Description:

    A modified epoxy formulated to provide outstanding corrosion resistance as a single-coat, direct-to-metal (DTM) exterior coating for railcars and other structures. While all epoxies will chalk and yellow under UV exposure; Carboguard 876 resists this effect better than most.


  • Carboguard 877

    Features:

    • Excellent corrosion protection
    • Very smooth finish to enhance topcoat appearance
    • Tough, flexible and impact resistant
    • Good abrasion resistance
    • VOC compliant to current AIM regulations
    • Easy 1:1 ratio for convenience

    Description:

    A high solids, high build rust inhibitive epoxy primer with excellent corrosion resistance for long-term protection of the exterior of railcars. May be applied by standard or plural component airless equipment and is easily applied by brush or roll method for touch up. Performs extremely well under a wide variety of topcoats.


  • Carboguard 890

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Conventional and low-temperature versions
    • Self-priming and primer/finish capabilities
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities
    • Intermediate coat for AWWA D102 Outside System #6 and #7
    • Approved MPI #98

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. An optional micaceous iron oxide additive (MIO Filler) can be purchased separately and may be used per the Product Data Sheet to enhance corrosion protection and film strength for more aggressive service such as severe marine or heavy industrial uses.


  • Carboguard 890 GF

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Low-temperature version: 890 LT GF
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations
    • Non-skid service with optional fillers

    Description:

    A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.


  • Carboguard 890 GF2

    Features:

    • Convenient two-component mix
    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations

    Description:

    A two-component, glass reinforced epoxy coating. 890 GF2 is chemical resistant and has a wide range of uses in industrial environments. Its glass reinforcement allows for excellent internal film strength, hardness, impact, and abrasion resistance. Most commonly, it is used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.


  • Carboguard 890 H

    Features:

    • Excellent chemical resistance
    • Self-priming and primer/finish capabilities
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • The US Navy has determined its suitability for use in hyperbaric chambers

    Description:

    Highly chemical resistant epoxy with specialized application in hyperbaric chambers for the US Navy and other users. The product is self-priming and is most often used as a two-coat lining system. The product is an immersion-grade formula for water, seawater and other exposures.


  • Carboguard 890 LT

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Low-temperature cure formulation
    • Self-priming capability
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Excellent for use as a primer or intermediate coat where low temperature cure is needed. Can be used in a variety of chemical environments. May be used as a self-priming or finish coat on exterior exposure if discoloration can be tolerated.


  • Carboguard 890 LT GF

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Conventional and low-temperature versions
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations
    • Non-skid service with optional fillers

    Description:

    A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service above the water line in marine applications where these resistance qualities are desired.


  • Carboguard 890 VOC

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Self-priming and primer/finish capabilities
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Carboguard 890 VOC serves as stand-alone system for a variety of chemical environments.


  • Carboguard 8902 FC

    Features:

    • Solvent-free
    • Direct-to-metal / self-priming
    • Single coat economics
    • Excellent corrosion and chemical resistance
    • Fast-dry properties

    Description:

    Carboguard 8902 FC is a solvent-free, two component, amine cured epoxy formulated for use as a direct-to-metal (DTM) exterior coating with excellent corrosion and chemical resistance. It has very fast dry to handle and cure properties making it desirable for shop applications. Used as a single-coat, protective coating for a variety of uses including equipment, piping, structural steel, and tankage exposed to corrosive and/or abusive service.


  • Carboguard 890N

    Features:

    • Can be applied direct to steel without a primer
    • Single coat, high build capabilities
    • Can be applied to minimally prepared surfaces
    • Compatible to many existing, aged epoxies and inorganic zinc coatings
    • Easily decontaminated
    • DBA tested and qualified for Nuclear Service Level 1
    • Resistant to high levels of radiation
    • High solids and low VOC help reduce effects on charcoal filters
    • Application-friendly characteristics minimize manrem exposure
    • Suitable for use under insulation on hot surfaces operating up to 300°F (149°C) outside level 1 areas.

    Description:

    Nuclear grade, DBA tested, self priming epoxy. Tested and certified for use in Nuclear Level 1 areas in a variety of systems.


  • Carboguard 891 VOC

    Features:

    • Meets the FDA requirements for 21CFR 175.300 for direct food contact
    • Meets the requirements of AWWA C210
    • Ultra High solids; Low VOC and HAPs
    • Handles deionized water up to 150°F (66°C)
    • Ultra low VOC (67 g/l)
    • Good chemical resistance
    • Excellent thermal shock resistance
    • Good abrasion resistance

    Description:

    Ultra high solids epoxy that is designed as a liner for water, demineralized water, wastewater and many other services. It is widely used as a tank lining for steel and concrete tanks. Product is self-priming and is normally applied in two coats. Formulated for application at conventional builds (4 to 6 mils per coat) as well as high builds (10 mils per coat).


  • Carboguard 892

    Features:

    • Compatible over tightly adhered rust and old coatings in mild environments.
    • Very good abrasion resistance.
    • Excellent performance in wet exposures.
    • Meets FDA 21 CFR 175.300 criteria for direct food contact.
    • Acceptable for incidental food contact surfaces in federally inspected meat and poultry facilities.
    • VOC compliant to current AIM regulations.

    Description:

    A high solids, semi-gloss, high build, self-priming epoxy that can be applied by spray, brush, or roller. The cured film provides a tough, cleanable and aesthetically pleasing surface. Recommended uses for Carboguard 892 include railcar hopper interiors carrying dry food-grade cargoes. Other applications include food, meat, poultry, beverage, and pharmaceutical plants.


  • Carboguard 892 PR

    Features:

    • Compatible over tightly adhered rust and old coatings in mild environments.
    • Very good abrasion resistance.
    • Excellent performance in wet exposures.
    • Meets FDA 21 CFR 175.300 criteria for direct food contact.
    • Acceptable for incidental food contact surfaces in federally inspected meat and poultry facilities.
    • VOC compliant to current AIM regulations.

    Description:

    A high solids, semi-gloss, high build, self-priming epoxy that can be applied by spray, brush, or roller. The cured film provides a tough, cleanable and aesthetically pleasing surface. Recommended uses for Carboguard 892 PR include railcar hopper interiors carrying dry food-grade cargoes. Other applications include food, meat, poultry, beverage, and pharmaceutical plants.


  • Carboguard 8922

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Used as a primer or intermediate coat
    • Can be applied over power tool cleaned surfaces
    • Wet on wet application at 75 ° F (24 °C) substrate temperature
    • Acceptable over iron phosphate preparation

    Description:

    Carboguard 8922 is a versatile corrosion resistant coating. May be topcoated with itself, or a broad variety of high performance finish coats. Carboguard 8922 has surface tolerant properties.


  • Carboguard 8922 LH

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required
    • Economical fit for use epoxy
    • Used as a primer or intermediate coat
    • Can be applied over power tool cleaned surfaces
    • Wet on wet application at 75° F (24°C) substrate temperature
    • Acceptable over iron phosphate preparation
    • Low HAPS of 1.85 pounds/solid gallon

    Description:

    Carboguard 8922 LH is a versatile corrosion resistant coating. May be topcoated with itself, or a broad variety of high performance finish coats. Carboguard 8922 LH has surface tolerant properties. Specially formulated to meet current Federal guidelines for HAPS content.


  • Carboguard 893

    Features:

    • Excellent corrosion protection
    • Excellent film build and edge protection
    • Used as a primer or an intermediate coating
    • Good abrasion resistance
    • Cures down to 40°F (4°C)
    • VOC compliant to current AIM regulations

    Description:

    High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats.


  • Carboguard 893 SG

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Available in a variety of rapid tint colors
    • Attractive low sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Power tool cleaned surfaces acceptable
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. Carboline glass flake additive may be added to improve performance including internal strength, hardness, impact, and abrasion resistance. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties. Use optional (LT) cure for low temperature cure down to 35°F (1.7°C).


  • Carboguard 893 SG LT

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Available in a variety of rapid tint colors
    • Attractive low sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Power tool cleaned surfaces acceptable
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties and low temperature 35 °F (2 °C) cure capability.


  • Carboguard 893 SG MIO

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Used as a primer or intermediate coat
    • Can be applied over power tool cleaned surfaces
    • Micaceous iron oxide (MiO Filler) for additional barrier properties and corrosion resistance: MiO is purchased separately
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating with zinc phosphate corrosion inhibitor. Contains additional filler reinforcement (micaceous iron oxide) for enhanced barrier resistant properties. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers. May be topcoated with a broad variety of high performance finish coats. Has surface tolerant properties. Has optional (LT) cure for 35°F cure capability.


  • Carboguard 893N

    Features:

    • Excellent corrosion protection
    • Excellent film build and edge protection
    • Used as a primer or an intermediate coating
    • Good abrasion resistance
    • VOC compliant to current AIM regulations
    • Tested for Nuclear Service Level 1

    Description:

    Nuclear grade, DBA tested, self priming epoxy. Tested and certified for use in Nuclear Level 1 areas in a variety of systems.


  • Carboguard 896

    Features:

    • Meets requirements of 21CFR 175.300

    Description:

    Carboguard 896 is a two component, high solids, modified epoxy formulated for use as a protective hopper lining with excellent resistance to fugitive acetic and hydrochloric acids often found in many plastic pellet cargoes.


  • Carboguard 904

    Features:

    • Exterior coating for railcars applied in one coat by plural component equipment.

    Description:

    Carboguard 904 is a two component, amine cured epoxy formulated for use as a direct-to-metal (DTM) exterior coating with excellent corrosion and chemical resistance.


  • Carboguard 954 HB

    Features:

    • Surface tolerant characteristics to existing finishes and SP2, SP3-cleaned steel
    • Single-coat application in most instances
    • High-build capability
    • Self-priming and primer/finish capabilities
    • Excellent abrasion and moisture resistance
    • True brush & roll characteristics
    • VOC compliant to current AIM regulations

    Description:

    All-purpose, high-build, solvent-free, spray, brush or roll epoxy mastic coating with applications in all industrial markets and for almost all substrates. Product has excellent wetting properties making it ideal for direct-to-substrate (steel or concrete) surface-tolerant applications.


  • Carboguard 992

    Features:

    • Single coat, high performance protection.
    • Low-to-no odor.
    • Easy to apply by plural component airless.
    • Meets FDA requirements of 21CFR 175.300.
    • Excellent chemical resistance.
    • Fast cure.
    • Tough, flexible, abrasion resistant.
    • Excellent corrosion protection.
    • Impact resistant.
    • Hi-build application in one coat.

    Description:

    Carboguard 992 is a solventless, epoxy lining for dry bulk cargoes that is applied by heated, airless plural component spray, as a one coat lining for hopper cars carrying plastic pellets, food and grain, or other dry cargoes. It is acceptable for direct contact with dry bulk food products.


  • Carboguard 995

    Features:

    • Flexible, solvent-free lining
    • Meets requirements of 21CFR 175.300
    • Single-coat application
    • Excellent flow and leveling

    Description:

    Carboguard 995 is a two component, 99% volume solids, amine cured epoxy formulated as a flexible, direct-to-metal (DTM) protective lining for railcars. Typical uses include dry bulk service for hopper cars carrying polyethylene, polypropylene or polystyrene plastic pellets.


  • Carboline Gun Cleaner

    Features:

    Description:

    A specialized cleaner for spray equipment and misc. parts.


  • Carbomastic 15

    Features:

    • Unique formulation with lamellar aluminum flakes for exceptional barrier protection
    • Excellent performance over minimal surface preparation of steel substrates
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Available in a low temperature cure version (Carbomastic 15 FC)
    • Suitable for use under insulation on hot surfaces operating up to 300 °F (150 °C)
    • VOC compliant to current AIM regulations

    Description:

    Aluminum pigmented, low-stress, high-solids mastic with a proven field history. This unique formulation incorporates lamellar aluminum pigment for superior barrier protection. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.


  • Carbomastic 15 FC

    Features:

    • Unique formulation with lamellar aluminum flakes for exceptional barrier protection
    • Excellent performance over minimal surface preparation of steel substrates
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • May be applied at 35°F (2°C) when CM 15 FC's part B is utilized
    • Suitable for use under insulation on hot surfaces operating up to 300°F(150°C)
    • VOC compliant to current AIM regulations

    Description:

    Aluminum pigmented, low-stress, high-solids mastic with a proven field history. This unique formulation incorporates lamellar aluminum pigment for superior barrier protection. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.


  • Carbomastic 18 BT

    Features:

    • Excellent immersion performance in both fresh and sea water
    • Suitable as a rust preventive coating in ballast tanks and hull applications
    • Ideal for sub-sea installations, jackets and other areas exposed to sea water
    • Can be applied as low as 5°C (40°F)
    • Good flexibility
    • Very good abrasion resistance
    • VOC compliant

    Description:

    Carbomastic 18 BT is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Offshore applications include sub-sea, jackets, production decks, drilling rig legs, pontoons, in immersed surfaces. It meets the demands in IMO Performance Standard for Protective Coatings. It is classified “B1” (Superior Grade) under DNV standard “Testing and Classification of Ballast Tank Coatings”.


  • Carbomastic 18 FC

    Features:

    • Excellent immersion performance in both fresh and sea water
    • Suitable as a rust preventive coating in ballast tanks and hull applications
    • Ideal for sub-sea installations, jackets and other areas exposed to sea water
    • Can be applied as low as 5°C (40°F)
    • Good flexibility
    • Very good abrasion resistance
    • High solids; low VOC

    Description:

    This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad range of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, above and below the water line, ballast tanks, etc. Offshore applications include splash zones, subsea, jackets, production decks, drilling rig legs and pontoons in immersed exposures.


  • Carbomastic 242

    Features:

    • Single coat application characteristics
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Dry to handle in 24 hours at 20 °F (-7 °C)
    • Extended pot life at low temperatures
    • VOC compliant to current AIM regulations
    • Moisture curing capabilities in conjunction with cross-linking Epoxy

    Description:

    Aluminum-pigmented, low temperature curing mastic designed for cold weather applications down to 0 °F (-18 °C). This unique coating provides excellent corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3- cleaned steel.


  • Carbomastic 615

    Features:

    • High solids, low VOC
    • Low temperature cure
    • Excellent wetting properties
    • Excellent surface tolerance
    • Excellent moisture tolerance (application)
    • Continues to cure underwater
    • Fast cure response
    • Suitable for immersion service in fresh or salt water after 60 minutes cure @ 75°F

    Description:

    High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.


  • Carbomastic 615 AL

    Features:

    • Incorporates lamellar aluminum flakes to provide exceptional barrier protection
    • High solids, low VOC
    • Low temperature cure
    • Excellent wetting properties
    • Excellent surface tolerance
    • Excellent moisture tolerance after application
    • Fast cure response
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Suitable for immersion service in fresh or salt water after 2 hour cure @ 75°F

    Description:

    High performance, aluminum-filled epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding surface tolerance, low temperature cure capability, and very fast cure response for quick return to service. This lamellar aluminum-pigmented epoxy also contains inert flake reinforcement (micaceous iron oxide) to enhance film strength, barrier properties and overall performance.


  • Carbomastic 615 MC

    Features:

    • Low VOC < 100 g/l, high solids
    • Low HAPS 0.02 lbs./solid gallon
    • Excellent corrosion protection
    • Aluminum flakes and MIO provides exceptional barrier protection
    • Excellent wetting properties and adhesion
    • Outstanding tolerance to marginal surface preparation
    • Fast cure response for quick return to service
    • Cures for immersion service in fresh and salt water after 60 minutes @ 75°F
    • Low temperature cure
    • High dry film thickness (DFT)

    Description:

    High performance aluminum filled epoxy with inert flake reinforcement, micaceous iron oxide (MIO), to further enhance the film strength and performance. This low VOC, low HAPS coating provides excellent corrosion protection for substrates subjected to immersion service in fresh and salt water as well as typical industrial and marine environments. It has outstanding tolerance for marginal surface preparation. This coating cures very fast for quick return to service and also cures at low temperatures.


  • Carbomastic 90

    Features:

    • Very good performance over minimal surface preparation of steel substrates
    • Suitable as a tie-coat/topcoat for most tightly adhered existing coatings
    • Excellent film build on edges
    • Can be applied at temperatures as low as 40°F
    • VOC compliant to current AIM regulations

    Description:

    Economical, aluminum-pigmented mastic with excellent performance properties. Designed for a broad range of applications, this material provides good corrosion resistance, film build and surface tolerance. Can be applied at low temperatures and cures faster than many other epoxy mastics.


  • Carbomastic 94

    Features:

    • Surface tolerant epoxy mastic
    • Excellent corrosion protection
    • Low VOC
    • Custom colors available via RTS
    • Excellent wetting properties and adhesion
    • High solids, low stress over existing coatings
    • High film build, up to 7 mils DFT per coat
    • Class A Flame Spread and Smoke Development
    • Excellent durability
    • Good flexibility and impact resistance
    • Outstanding abrasion resistance
    • Good chemical resistance
    • Long pot life
    • Long maximum re-coat, up to 1 year
    • Approved topcoat over many Carboline Fireproofing Materials

    Description:

    A high performance, surface tolerant, high build, corrosion resistant epoxy mastic. It has outstanding adhesion to metal substrates along with most aged coatings and offers maximum protection against severe weather conditions, corrosion, moisture penetration and general industrial environments. It wets and penetrates firm rust and tight crevices and resists further rust deterioration. Use it on tank exteriors, structural steel, piping, process equipment, bridges & water towers. Carbomastic 94 may also be used for immersion in fresh or salt water (marine) exposures on barges, vessels and other marine applications. An optional micaceous iron oxide, (MIO), additive can be purchased separately and may be used per its Product Data Sheet to further enhance the coating's performance.


  • Carbomastic 94 MC

    Features:

    • Surface tolerant epoxy mastic
    • Excellent corrosion protection
    • Low VOC, passes Berkeley Analytical VOC Emissions Tests
    • Custom colors available via RTS
    • Excellent wetting properties and adhesion
    • High solids, low stress over existing coatings
    • High film build, up to 7 mils DFT per coat
    • Class A Flame Spread and Smoke Development
    • Excellent durability
    • Good flexibility and impact resistance
    • Outstanding abrasion resistance
    • Good chemical resistance
    • Long pot life
    • Long maximum re-coat, up to 1 year
    • Approved topcoat over many Carboline Fireproofing Materials

    Description:

    A high performance, surface tolerant, high build, corrosion resistant epoxy mastic. It has outstanding adhesion to metal substrates along with most aged coatings and offers maximum protection against severe weather conditions, corrosion, moisture penetration and general industrial environments. It wets and penetrates firm rust and tight crevices and resists further rust deterioration. Use it on tank exteriors, structural steel, piping, process equipment, bridges & water towers. Carbomastic 94 MC may also be used on barges, vessels and other marine applications. An optional micaceous iron oxide, (MIO), additive can be purchased separately and may be used per its Product Data Sheet to further enhance the coatings's performance.


  • Carbomastic 94 TL

    Features:

    • UL Category XKXC2 Approved Topcoat for use in Fire Resistive Applications
    • Class A Fire Retardant
    • Excellent Corrosion Protection
    • VOC Emissions Compliant per CDPH Standard Method v1.2
    • Excellent Wetting Properties
    • High Film Build
    • Outstanding Durability
    • Exceptional Flexibility and Impact Resistance
    • Outstanding Abrasion Resistance
    • Excellent Chemical Resistance

    Description:

    A high-performance, high build, chemical, and corrosion-resistant, UL category XKXC2 approved epoxy mastic topcoat optimized for use in Thermo-Lag E100 and Thermo-Lag 3000 series fire resistive applications required to meet class I-A criteria per ANSI/UL 2431. It demonstrates outstanding adhesion and offers maximum protection against severe weather conditions, corrosion, moisture penetration, and general industrial environments.


  • Carboquick 200

    Features:

    • Fast cure speeds the painting process
    • High build, 6 to 10 mils DFT per coat
    • Excellent corrosion protection
    • Meets ISO 12944-6 C3 High, one coat applied DTM
    • Saves significant time, labor and money
    • Excellent weathering
    • Exceeds SSPC Coating Specification No. 39 Level 3A, highest level for aliphatic polyurea
    • Exceeds SSPC Coating Specification No. 36 Level 3A, highest level for aliphatic polyurethane
    • Very good flexibility and elongation
    • Excellent abrasion and impact resistance
    • Excellent wetting and adhesion
    • Extremely durable to help provide long service life
    • Low VOC and low HAPS
    • Suitable for use in USDA inspected facilities
    • Indefinite recoatability

    Description:

    This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 6 to 10 mils dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc, Carbomastic, or Carboguard primers.


  • Carboquick 201

    Features:

    • Fast cure with good pot life - speeds the painting process
    • High build, up to 10 mils DFT per coat
    • Can be applied direct to metal (DTM)
    • Excellent corrosion protection - ISO 12944-6 C3 Low, DTM; C5 High over Carbozinc 859
    • Excellent corrosion protection over phosphatized carbon steel - ISO 12944-6 C3 High
    • Excellent weathering - SSPC Ctg. Spec. No. 39 Level 3A (highest level)
    • 1 - 2 coats instead of 2 - 3 coats saves significant time, labor and money
    • Excellent durability - abrasion and impact resistant
    • Low VOC and low HAPS
    • Indefinite recoatability

    Description:

    This fast-cure, high-build polyaspartic coating provides good corrosion protection plus long term weatherability in just one coat. It can be applied direct to metal (DTM). For improved corrosion protection it can be applied over approved primers including Carbozinc 859. These 1 - 2 coat systems can eliminate the need for typical primers and/or intermediate coats to significantly speed up the painting process. Suitable for use in USDA inspected facilities.


  • Carbothane 133 FC

    Features:

    • Outstanding performance properties in both mild and aggressive environments
    • Fast cure
    • High build; suitable for many two-coat systems
    • Suitable for application direct to inorganic zincs
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Contains no reportable HAP's

    Description:

    High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 133 FLV

    Features:

    • High solids, high build, aliphatic polyurethane
    • Outstanding weathering properties
    • Quick dry to recoat and dry to handle times
    • Good resistance to corrosion and abrasion
    • Low VOC and low HAPs content
    • Low temperature cure down to 35°F
    • Indefinite recoatability (no maximum recoat time)
    • Can be applied directly to zinc-rich primers (with a properly applied mist coat)

    Description:

    A high solids, high build, low sheen topcoat which provides a tough attractive finish and outstanding weathering properties. In addition, this low VOC & HAPs polyurethane demonstrates good resistance to abrasion and corrosion when applied over recommended Carboline primers and/or intermediate coats.


  • Carbothane 133 HB

    Features:

    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Suitable for application direct to inorganic zincs
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 133 LH

    Features:

    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Low HAPs content

    Description:

    High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 133 LH Metallic

    Features:

    • Available in limited colored metallic finishes
    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Low HAPs content

    Description:

    High build, dull metallic finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 133 LV

    Features:

    • High solids, high build, aliphatic polyurethane
    • Outstanding weathering properties
    • Quick dry to recoat and dry to handle times
    • Good resistance to corrosion and abrasion
    • Low VOC and low HAPs content
    • Low temperature cure down to 35°F
    • Satin to semi-gloss finish allows for easier field touch-up
    • Indefinite recoatability (no maximum recoat time)
    • Can be applied directly to zinc-rich primers (with a properly applied mist coat)

    Description:

    A high solids, high build, satin topcoat which provides a tough attractive finish and outstanding weathering properties. In addition, this low VOC & HAPs polyurethane demonstrates good resistance to abrasion and corrosion when applied over recommended Carboline primers and/or intermediate coats.


  • Carbothane 133 MC

    Features:

    • Outstanding performance properties in virtually all industrial markets
    • High build; suitable for many two coat systems
    • High solids formulation allows for improved edge protection
    • Suitable for application direct to inorganic and organic zinc primers
    • Indefinite recoatability
    • VOC compliant to 100 g/l VOC regulations

    Description:

    High solids, high build, weatherable coating that provides a tough attractive finish while exhibiting outstanding performance properties. Demonstrates extremely good resistance to abrasion, corrosion and chemical exposure when applied over recommended Carboline primers and/or intermediate coats.


  • Carbothane 133 VOC

    Features:

    • Compliant to AWWA D102-11, OCS-4 & OCS-6
    • Outstanding performance properties in virtually all industrial markets
    • High build; suitable for many two-coat systems
    • High solids formulation allows for improved edge protection
    • Suitable for application direct to inorganic and organic zinc primers
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities
    • Suitable for use as a metalizing sealer*

    Description:

    High solids, high build, satin finish that provides a tough attractive finish while exhibiting outstanding performance properties. Demonstrates extremely good resistance to abrasion, corrosion and chemical exposure when applied over recommended Carboline primers and/or intermediate coats.


  • Carbothane 134 Clear Coat

    Features:

    • Hard finish with excellent impact and abrasion resistance
    • Excellent resistance to UV degradation
    • Attractive gloss finish
    • Suitable for airless, conventional spray or roller application
    • VOC compliant to current AIM regulations
    • Indefinite recoatability
    • Improves resistance to graffiti over traditional urethane topcoats
    • Suitable for use as a metalizing sealer*

    Description:

    A clear coat finish that provides added UV protection over pigmented Carboline polyurethanes. Exceptionally hard film and excellent depth-of-image provide extended service life to the Carbothane® topcoats, especially when deeptone and metallic colors are used.


  • Carbothane 134 HG

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Available in all Carboline colors including metallic-pigmented colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Meets the requirements of AWWA D 102 Outside Coating System (OCS) 5 & 6
    • Suitable for use in USDA inspected facilities
    • Meets the performance requirements of MIL-PRF-85285E Type II, Class H Polyurethane
    • Meets the performance requirements of UFGS 09 97 13.27 Polyurethane Topcoat

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 134 HG Aluminum

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Available in metallic-pigmented colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 134 HS

    Features:

    • Excellent weatherability
    • Excellent flexibility
    • Excellent abrasion resistance
    • Available in Carboline’s Rapid Tint System
    • Meets most VOC requirements
    • Indefinite recoatability

    Description:

    An attractive, high gloss, high solids topcoat which is easily applied by airless or conventional spray to yield a smooth, easily cleanable surface. Recommended use as a finish coat for the exteriors of tanks, equipment, piping, structural steel, and concrete surfaces where chemical resistance, toughness, and weatherability are required. An excellent coating for use in chemical processing, pulp and paper, petro-chemical, bridge, offshore, railcars, heavy marine, institutional and waste treatment facilities where a highly resistant and attractive coating is desired. Not recommended for immersion service.


  • Carbothane 134 MC

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to 100 g/l VOC regulations
    • Approved MPI #72

    Description:

    High gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, provides a smooth, durable finish that has superior resistance to corrosion and chemical exposure.


  • Carbothane 134 MC Aluminum

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Excellent flow characteristics allow for application by spray or roller
    • Available in metallic-pigmented colors
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant <100 g/l VOC

    Description:

    High gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, provides a smooth, durable finish that has superior resistance to corrosion and chemical exposure.


  • Carbothane 134 UV Ultra

    Features:

    • Superior color and gloss retention in UV exposure
    • Exceeds SSPC Coating Specification No. 36 Level 4A, highest level
    • Outstanding weatherability
    • Exceptional impact and abrasion resistance
    • Excellent flow characteristics allow application by spray, brush and roller
    • High solids, low VOC content
    • Suitable for use in USDA inspected facilities
    • Indefinite recoatability

    Description:

    Premium thin film, high gloss finish with superior weathering performance due to its outstanding color and gloss retention in UV exposure. This smooth, flexible finish has excellent abrasion and impact resistance combined with very good chemical resistance. Carbothane 134 UV Ultra provides excellent durability and maximum service life in many harsh exterior environments.


  • Carbothane 134 VOC

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Meets the requirements of AWWA D 102 Outside Coating Systems (OCS) 5 & 6
    • Suitable for use in USDA inspected facilities

    Description:

    High gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, provides a smooth, durable finish that has superior resistance to corrosion and chemical exposure.


  • Carbothane 134 WB

    Features:

    • Water based, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Suitable for USDA inspected facilities
    • Available in most Carboline and custom colors
    • Excellent flow characteristics allow for application by spray or roller
    • Flexible, impact and abrasion resistant film
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used for the weathering protection of a variety of substrates in all architectural and industrial markets. It provides a smooth, durable finish that has excellent weathering resistance, gloss and color retention..


  • Carbothane 138

    Features:

    • Excellent corrosion resistance as part of a three coat system
    • Passes ISO 12944-6 C5 High and C5 Very High
    • Passes ISO 12944-9 CX
    • Excellent weatherability
    • Exceeds SSPC Paint 36, level 3A
    • Formulated for ready to spray applications
    • Wide range of colors are available
    • Indefinite recoat

    Description:

    A value- added high gloss, high solids topcoat which is easily applied by airless or conventional spray to yield a smooth, easily cleanable surface. Recommended to be used as a finish coat for the exteriors of tanks, equipment, piping, structural steel, and concrete surfaces where toughness and weatherability are required.


  • Carbothane 8812

    Features:

    • VOC compliant – 3.3 pounds per gallon as supplied
    • Direct-To-Metal (DTM)
    • Fast Dry – 6-8 hours to handle at 75°F
    • High build, high gloss
    • Excellent abrasion resistance
    • Application by conventional, airless spray, HVLP or electrostatic
    • Excellent chemical resistance
    • Ambient air or force cure with conventional or infrared ovens
    • Suitable for use in USDA inspected facilities

    Description:

    Carbothane 8812 is a fast dry, high gloss, high build, two component polyurethane coating. Carbothane 8812 exhibits the excellent dry times and handling characteristics required by Original Equipment Manufacturers. This coating has outstanding hardness, adhesion and resistance to: impact, marring, abrasion, chemicals and staining. Carbothane 8812 is recommended as a direct to metal finish coat or as a finish coat over properly primed substrates. Typical applications include air compressors, propane tanks, trailer chassis and frames, valves, pumps, waste water treatment plant equipment, agricultural equipment, hazardous material storage buildings and general industrial equipment. Not recommended for continuous immersion service.


  • Carbothane 8815

    Features:

    • VOC compliant
    • Direct-To-Metal (DTM)
    • Very Fast Dry
    • High build, high gloss
    • Excellent abrasion resistance
    • Application by conventional or airless spray, HVLP, Electrostatic or plural component spray
    • Excellent chemical resistance
    • Ambient air or force cure with conventional or infrared ovens
    • Suitable for USDA inspected facilities

    Description:

    A fast dry, high gloss, high build, two component polyurethane coating. Carbothane 8815 exhibits the excellent dry times and handling characteristics required by Original Equipment Manufacturers. This coating has outstanding hardness, adhesion and resistance to: impact, marring, abrasion, chemicals and staining. Carbothane 8815 is recommended as a direct to metal finish coat or as a finish coat over properly primed substrates.


  • Carbothane 8832

    Features:

    • Low VOC – 2.8 pounds per gallon as supplied
    • Low HAPS
    • Direct-To-Metal (DTM)
    • Very Fast Dry – 90-120 minutes to handle at 75°F (24°C)
    • High build, high gloss
    • Application by conventional or airless spray, HVLP, Electrostatic or plural component spray
    • Ambient air or force cure with conventional or infrared ovens
    • Meets ISO 12944 C3 Medium

    Description:

    Carbothane 8832 is a fast dry, high gloss, high build, two component polyurethane coating. Carbothane 8832 exhibits the excellent dry times and handling characteristics required by Original Equipment Manufacturers. This coating has outstanding hardness, adhesion and resistance to impact, marring, abrasion and staining. Carbothane 8832 is recommended as a direct to metal finish coat or as a finish coat over properly primed substrates. Typical applications include air compressors, propane tanks, trailer chassis and frames, valves, pumps, waste water treatment plant equipment, agricultural equipment, hazardous material storage buildings and general industrial equipment. Not recommended for continuous immersion service.


  • Carbothane 8845

    Features:

    • VOC compliant – 1.9 lbs/gal (228 g/l) as supplied
    • Direct-To-Metal (DTM)
    • 6 hours to handle at 75 °F (24 °C)
    • High solids, high build, high gloss
    • Excellent abrasion resistance
    • Application by conventional, airless spray, HVLP or electrostatic
    • Excellent chemical resistance
    • Ambient air or force cure with conventional or infrared ovens
    • Suitable for USDA inspected facilities

    Description:

    Carbothane 8845 is a fast dry, high solids, low VOC, high gloss, high build, two component polyurethane coating. Carbothane 8845 exhibits the excellent dry times and handling characteristics required by Original Equipment Manufacturers. This coating has outstanding hardness, adhesion and resistance to: impact, marring, abrasion, chemicals and staining. Carbothane 8845 is recommended as a direct to metal finish coat or as a finish coat over properly primed substrates. Typical applications include air compressors, propane tanks, trailer chassis and frames, valves, pumps, waste water treatment plant equipment, agricultural equipment, hazardous material storage buildings and general industrial equipment. Not recommended for continuous immersion service.


  • Carbothane Clear Coat (Satin)

    Features:

    • Hard finish with excellent impact and abrasion resistance
    • Excellent resistance to UV degradation
    • High gloss version provides very good depth of image
    • Attractive gloss and satin finishes
    • Suitable for conventional spray or roller application
    • VOC compliant to current AIM regulations

    Description:

    A clear coat finish that provides added UV protection over pigmented Carboline polyurethanes. Exceptionally hard film and excellent depth-of-image provide extended service life to the Carbothane topcoats, especially when deeptone and metallic colors are used.


  • Carbothane DTM Mastic

    Features:

    • Surface tolerant properties including tightly bound rust
    • Weatherable, UV stable urethane chemistry
    • Exceeds SSPC Paint 36 Level 3A
    • Meets ISO 12944-6 C3 Medium over prepared steel
    • VOC compliant – 2.0 lbs/gal (245 g/l) as supplied
    • Direct-To-Metal (DTM)
    • Excellent abrasion resistance and chemical resistance
    • Application by conventional, airless spray, brush and roll
    • Ambient air dry
    • Suitable for USDA inspected facilities

    Description:

    Carbothane DTM Mastic is a weatherable direct- to -metal or finish coat with surface tolerant properties for maintenance coating applications. It is a high solids, high gloss, buildable, two component polyurethane coating that adheres to tightly bound rust, bare metal, aged coatings and other surfaces. Carbothane DTM Mastic exhibits excellent dry times and handling characteristics. It has surface tolerant properties for ease of use and reduced prep time. This coating has outstanding hardness, adhesion and resistance to impact, marring, abrasion, chemicals and staining.


  • Carbotherm 3300

    Features:

    • Excellent thin-film insulation
    • Unique formula provides superior coverage during application
    • Protects personnel from hot surfaces
    • Multi-purpose interior/exterior coating
    • Insulation provides anti-condensation properties
    • Easy to use
    • Zero VOC; Low odor
    • May be applied to hot surfaces

    Description:

    Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment.


  • Carbotherm 551

    Features:

    • Excellent thin-film insulation
    • Unique epoxy formula outperforms acrylic-based materials
    • Tougher and more durable than acrylic coatings
    • Higher chemical resistance than acrylic coatings
    • Topcoats are optional
    • Protects personnel from hot surfaces
    • Ideal for industrial/aggressive applications
    • Insulation provides anti-condensation properties
    • Acceptable for use in USDA facilities
    • High film build per coat; fewer coats
    • Low VOC; low odor
    • May be applied to hot surfaces

    Description:

    Carbotherm 551 is a unique insulative composite coating formulated in a high temperature resistant epoxy binder. Unlike acrylic-based insulative materials it has superior toughness, hardness, impact resistance, chemical resistance and permeation resistance. It is therefore more suitable for industrial applications or other physically demanding environments. It is an ideal protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate condensation of pipes or other operating equipment. Its superior application properties of higher film build per coat and fewer coats offers savings and quicker return to service. Because it bonds directly to the surface (unlike standard insulation materials) it minimizes water entry and the effect of corrosion under insulation.


  • Carbotherm 730

    Features:

    • Provides total submersion and splash and spill cryogenic protection
    • Resistant to moisture and chemical exposure
    • Excellent spray properties
    • Can be applied by plural component airless spray, trowel or casting
    • High film build

    Description:

    An insulative coating designed to provide cryogenic protection for structural steel, vessels, piping and ductwork operating at temperatures between -40°F (-40°C) and 175°F (79°C). This product can be utilized as a base coat with Carboline fireproofing materials to provide combined insulation and fire protection to substrates exposed to a cryogenic spill followed by a hydrocarbon fire.


  • Carbotherm 731

    Features:

    • Thermal protection up to 302°F (150°C)
    • Provides total submersion and splash and spill cryogenic protection
    • Resistant to moisture and chemical exposure
    • Excellent spray properties
    • Can be applied by plural component airless spray, trowel or casting
    • High film build

    Description:

    An insulative coating designed to provide thermal protection for structural steel, vessels, piping and ductwork with continuous operating temperatures between -40°F (-40°C) and 302°F (150°C). This product can be utilized as a base coat with Carboline fireproofing materials to provide combined insulation and fire protection.


  • Carboweld 11

    Features:

    • Welds made over Carboweld 11 coated steel are equal in every respect to welds made to uncoated steel
    • Designed to protect steel during construction phase of projects under normal conditions
    • Can be topcoated for additional long-term protection for atmospheric exposures.
    • Weld spatter does not adhere to or damage the coating
    • Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld
    • Dries to touch and to handle in 3 to 5 minutes
    • Certified as a pre-construction primer for Lloyds Register constructions

    Description:

    A weldable pre-construction inorganic zinc primer for shop use only.


  • Carboweld 14 WB

    Features:

    • High zinc content
    • Zero VOC, water based formula
    • Cathodic protection
    • Excellent undercutting resistance
    • Weldable pre-construction primer

    Description:

    Carboweld 14 WB is a fast drying, high zinc content, 2-package pre-construction primer for steel substrates. It performs well as a shop/yard primer for corrosion protection during fabrication phase. It provides cathodic sacrificial protection and thus prevents corrosion of the underlying steel, like galvanizing. It contains 88% zinc dust by weight in the dried film. This waterborne product has no VOC or flash point. It can be used as a shop primer when weldability and corrosion protection are necessary. Use it in industrial, marine & process environments.


  • Carboweld 17 FG

    Features:

    • Weldable, pre-construction primer
    • Cathodic protection mechanism
    • Excellent undercutting resistance
    • ABS Certified to IMO/PSPC Standard
    • Certified as a pre-construction primer for Lloyds Register constructions

    Description:

    Carboweld 17 FG is a fast drying, 2 component, zinc rich primer designed for the prefabrication priming of steel for marine, coastal and demanding industrial environments. It is a weldable, hard, abrasion resistant primer that provides cathodic protection. Use it to protect steel on marine vessels and off-shore structures during construction and in areas where welding, heat resistance, impact and abrasion resistance are necessary. It has been tested by DNV and certified by ABS to the IMO/PSPC standard for ballast tank linings.


  • Carbowrap Marine Paste

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack

    Description:

    Carbowrap Marine Paste is a preparatory priming paste used to displace surface moisture, passivates surface oxides and fills small irregularities in the substrate. It consists of saturated petroleum based compound and passivating agents. Marine Paste is a special primer paste that contains wide spectrum biocides. Carbowrap Marine Paste is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Marine Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Marine Tape

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/in
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours
    • Service Temperature: 131 °F (55 °C)

    Description:

    Carbowrap Marine Tape is a non-woven bonded synthetic fabric, fully impregnated and coated with natural petroleum based compounds and inert fillers. It is chemically inert, does not polymerize or oxidize, retains water resistance and dielectric properties over an indefinite period, and contains a highly effective anti-bacterial agent to protect the substrate from microbial corrosion activities. This tape is designed for application underwater, near the splash zone, or on substrates in a corrosive marine environment. Carbowrap Marine Tape is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Marine Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Mastic

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/inch
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours

    Description:

    Carbowrap Mastic is afiller which profiles areas to be wrapped by easing contours on pipe joints, flanges, valves, bolts, and other irregular shapes. Consists of saturated petroleum based compounds, inert fillers, and reinforcing fibers. Carbowrap Mastic is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Overwrap

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack

    Description:

    Carbowrap Overwrap A stabilized, plasticized, PVC film coated with an anti-corrosive pressure sensitive adhesive used to wrap over petrolatum tapes to provide colorcoding and additional protective properties. It is flexible, resists acids, alkalies, and oils. Carbowrap Overwrap is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Paste

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack

    Description:

    Carbowrap Paste is a preparatory priming paste used to displace surface moisture, passivates surface oxides and fills small irregularities in the substrate. It consists of saturated petroleum based compound and passivating agents. Carbowrap Paste is a special primer paste that contains wide spectrum biocides. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowrap Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Tape A

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/inch
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours
    • Service Temperature: 131 °F (55 °C)

    Description:

    Carbowrap Tape is a non-woven bonded synthetic fabric, fully impregnated and coated with natural petroleum based compounds and inert fillers. It is chemically inert, does not polymerize or oxidize, and retains water resistance and dielectric properties over an indefinite period. Three different tapes are available depending on the service temperatures (130 °F [54 °C], 150 °F [66 °C], and 165 °F [74 °C] respectively). Carbowrap Tape is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Tape B

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/inch
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours
    • Service Temperature: 149 °F (65 °C)

    Description:

    Carbowrap Tape is a non-woven bonded synthetic fabric, fully impregnated and coated with natural petroleum based compounds and inert fillers. It is chemically inert, does not polymerize or oxidize, and retains water resistance and dielectric properties over an indefinite period. Three different tapes are available depending on the service temperatures (130 °F [54 °C], 150 °F [66 °C], and 165 °F [74 °C] respectively). Carbowrap Tape is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Tape C

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/inch
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours
    • Service Temperature: 167 °F (75 °C)

    Description:

    Carbowrap Tape is a non-woven bonded synthetic fabric, fully impregnated and coated with natural petroleum based compounds and inert fillers. It is chemically inert, does not polymerize or oxidize, and retains water resistance and dielectric properties over an indefinite period. Three different tapes are available depending on the service temperatures (130 °F [54 °C], 150 °F [66 °C], and 165 °F [74 °C] respectively). Carbowrap Tape is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carboxane 2000

    Features:

    • Isocyanate free
    • Exceptional weatherability
    • Outstanding color and gloss retention
    • Exceeds SSPC Coating Specification No. 36 Level 3A
    • Excellent corrosion protection
    • Meets ISO 12944 C3 High and C4 Medium, one coat applied at 5 to 7 mils DFT
    • High build, 3 to 7 mils DFT
    • Saves significant time, labor, and money
    • Long service life
    • VOC compliant
    • Excellent durability
    • Good flexibility and abrasion resistance
    • Long pot life

    Description:

    Carboxane 2000 is an isocyanate free, ultra-durable coating that provides outstanding color and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. This tightly cross-linked film utilizes a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.


  • Carboxane 2000 Satin

    Features:

    • Isocyanate free
    • Exceptional weatherability
    • Outstanding color and gloss retention
    • Exceeds SSPC Coating Specification No. 36 Level 3A
    • Excellent corrosion protection
    • Meets ISO 12944 C3 High and C4 Medium, one coat at 5 to 7 mils DFT
    • High build, 3 to 7 mils DFT
    • Saves significant time, labor, and money
    • Long service life
    • VOC compliant
    • Excellent durability
    • Good flexibility and abrasion resistance
    • Class A Flame Spread (ASTM E84)
    • Long pot life

    Description:

    Carboxane 2000 Satin is a premium, ultra-durable coating that provides outstanding color and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 Satin provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance.


  • Carboxane 2000 Topcoat

    Features:

    • Exceptional weatherability
    • Long service life
    • Isocyanate free
    • Excellent abrasion resistance
    • Excellent for use in chemical industry, offshore, ships, bridges, hydropower and other heavy industry

    Description:

    Carboxane 2000 Topcoat is an advanced isocyanate free topcoat with outstanding gloss and color retention for exterior exposures. Provides a high gloss surface and can be used where polyurethane coatings is not desired.


  • Carboxane 2100 BR

    Features:

    • Pronounced growth inhibition to fungi such as Baudoinia (black fungal growth in the presence of ethanol and alcohol vapors)
    • Isocyanate free
    • Fast cure with good pot life - speeds the painting process
    • Excellent weathering - SSPC Coating Spec. No. 36 Level 3A (highest level) for polyurethanes
    • Can be applied direct to metal (DTM)
    • Excellent corrosion protection - ISO 12944-6 C3 High and C4 Medium, one coat applied DTM
    • 1 - 2 coats instead of 2 - 3 coats saves significant time, labor, and money
    • Low VOC (less than 100 g/l)
    • Excellent durability - abrasion and impact resistant

    Description:

    Carboxane 2100 BR is an isocyanate free, ultra-durable, fast-cure corrosion resistant coating that exhibits pronounced growth inhibiting activity against a broad spectrum of bacteria and fungi such as baudoinia (black fungal growth often found in the presence of ethanol and alcohol vapors). This coating provides outstanding color and gloss retention for exterior exposures that exceeds many acrylic aliphatic polyurethanes. It provides good corrosion protection and can be applied direct to metal (DTM) in exposures designated "urban to light industrial" (C1-C4 according to ISO 12944). For improved corrosion protection it can be applied over approved primers. This product meets the most stringent VOC regulations for field applied coatings with less than 100 g/l volatile organic content.


  • Carboxane 2100 FC

    Features:

    • Isocyanate free
    • Fast cure with good pot life - speeds the painting process
    • Excellent weathering - SSPC Coating Spec. No. 36 Level 3A (highest level) for polyurethanes
    • Can be applied DTM
    • Excellent corrosion protection - ISO 12944-6 C3 High and C4 Medium, 1 coat applied DTM
    • 1 - 2 coats instead of 2 - 3 coats saves significant time, labor, and money
    • Low VOC (less than 100 g/l)
    • Excellent durabilitiy - abrasion and impact resistant
    • Meets IEEE ANSI C57.12.29-2005 Standard For Pad Mounted Equipment

    Description:

    Carboxane 2100 FC is an isocyanate free, ultra-durable, fast-cure corrosion resistant coating that provides outstanding color and gloss retention for exterior exposures that exceeds many acrylic aliphatic polyurethanes. It combines the chemical resistant properties of epoxies with the weathering characteristics of acrylic-polyurethanes. This tightly cross-linked film results in a finish with outstanding barrier properties. It provides good corrosion protection and can be applied direct to metal (DTM) in exposures designated "urban to light industrial" (C1 - C4 according to ISO 12944). For improved corrosion protection it can be applied over approved primers. It is most often used as the finish coat of a 2 coat system utilizing a zinc-rich primer for maximum corrosion resistance and longevity. These 1 - 2 coat systems can eliminate the need for typical primers and/or intermediate coats to significantly speed up the painting process. This product meets the most stringent VOC regulations for field applied coatings of less than 100 g/l volatile organic content.


  • Carboxane 2200 R

    Features:

    • Isocyanate free
    • Spray ready form
    • Exceptional weatherability
    • Outstanding color and gloss retention
    • Exceeds SSPC Coating Specification No. 36 Level 3A
    • Excellent corrosion protection
    • Meets ISO 12944 C3 High and C4 Medium, one coat applied at 5 to 7 mils DFT
    • High build, 3 to 7 mils DFT
    • Saves significant time, labor, and money
    • Long service life
    • VOC compliant
    • Excellent durability
    • Good flexibility and abrasion resistance
    • Long pot life

    Description:

    Carboxane 2200 R is an isocyanate free, ultra-durable coating that provides outstanding color and gloss retention as well as excellent corrosion protection for exterior exposures. It is supplied in a spray- ready form to eliminate or minimize the need for thinning during application. When used over a suitable primer (as a two coat system) Carboxane 2200 R provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. This tightly cross-linked film utilizes a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.


  • Carboxane 950 Clear Gloss

    Features:

    • Ambient temperature cure; no heat cure required
    • Meets AAMA 605.2 requirements (industry standard for PVDF finishes)
    • Exceptional weatherability
    • Excellent flow characteristics allow for application by spray or roller
    • Excellent graffiti resistance
    • Enhances long term performance over pigmented or metallic finishes

    Description:

    Premium, ultra-durable ambient cured clear coat finish meeting AAMA 605.2 performance requirements. This high gloss coating provides unparalleled color and gloss retention and exterior weathering characteristics. It offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.


  • Carboxane 950 MC Clear Satin

    Features:

    • Ambient temperature cure; no heat cure required
    • Exceptional weatherability
    • Excellent flow characteristics allow for application by spray or roller
    • Excellent graffiti resistance
    • VOC compliant to current SCAQMD regulations

    Description:

    This coating is a premium, ultra-durable, ambient-cured, clear satin finish. It is a VOC-compliant coating that provides unparalleled weathering resistance. It is primarily used over metallic base coats to maintain appearance during its service life. This product offers a level of durability for field application previously not available in the construction industry.


  • Carboxane 950 MC Metallic

    Features:

    • Metallic-filled appearance
    • Ambient temperature cure; no heat cure required
    • Exceptional weatherability (especially with Clear)
    • Excellent graffiti resistance
    • VOC compliant to current SCAQMD regulations

    Description:

    This coating is part of a premium, ultra-weatherable, ambient-cured, metallic finish system. It is a VOC-compliant coating that provides unparalleled weathering resistance and long lasting appearance. A clear finish coat is normally used in combination with this product to maintain metallic appearance over its service life. This product offers a level of durability for field application previously not available in the construction industry. It can also be applied directly to aged PVDF finishes.


  • Carboxane 950 Satin

    Features:

    • Ambient temperature cure; no heat cure required
    • Meets AAMA 605.2 requirements (industry standard for PVDF finishes)
    • Exceptional weatherability
    • Available in a variety of Carboline colors
    • Excellent flow characteristics allow for application by spray or roller
    • Excellent graffiti resistance
    • VOC compliant to current AIM regulations

    Description:

    Premium, ultra-durable ambient cured finish meeting AAMA 605.2 performance requirements. 950 is a VOC-compliant coating that provides unparalleled color and gloss retention and exterior weathering characteristics. Available in gloss and satin finishes as well as metallic finishes with clear coats, 950 offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.


  • Carboxane 950 VOC

    Features:

    • Performance upgrade for AWWA D102-11, OCS-4
    • Meets performance requirements of AAMA 2604 (industry standard for PVDF finishes)
    • Exceptional color and gloss retention
    • Available in a variety of Carboline colors
    • Excellent flow characteristics allow for application by spray or roller
    • VOC compliant to current AIM and OTC regulations
    • Ambient temperature cure

    Description:

    Premium, ultra-durable ambient cured finish meeting AAMA 2604 performance requirements. 950 VOC is a VOC-compliant coating that provides unparalleled color and gloss retention and exterior weathering characteristics. Available in gloss and satin finishes as well as metallic finishes with clear coats, 950 VOC offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.


  • Carbozinc 11

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure. Dry to handle in 45 minutes at 60°F (16°C) and 50% relative humidity
    • Low temperature cure down to 0°F (-18°C)
    • High zinc loading
    • Meets FDA requirements
    • Zinc supplied meets ASTM D520 (Type II)*
    • Meets SSPC Paint 20 Type I, Level 1 for zinc content
    • Very good resistance to salting
    • May be applied with standard airless or conventional spray equipment
    • VOC compliant in many areas
    • Approved MPI #19

    Description:

    Time-tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.


  • Carbozinc 11 FC

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure.Dry to handle in 30 minutes at 75°F (24°C) and 60% RH
    • Can be topcoated in 4-5 hours at 75°F/24°C and minimum 60% RH
    • High zinc loading
    • Tolerant to mudcracking (up to 6 mils/150 microns)
    • Smooth uniform texture reduces topcoat bubbling
    • Meets FDA requirements in gray color
    • Very good resistance to salting
    • May be applied with standard airless or conventional spray equipment
    • Low HAPs content of 0.12 lbs/solid gallon

    Description:

    Time-tested corrosion resistant technology that protects steel galvanically in the harshest environments. For over five decades, Carbozinc 11 Series primers have been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Carbozinc 11 FC is a faster-cure formulation that allows fast topcoating times making it ideal for quick turn around projects.


  • Carbozinc 11 HS

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to handle in 1 hour at 75°F (24°C) and 50% relative humidity
    • Low temperature cure down to 15°F (-9°C)
    • High zinc loading
    • Very good resistance to salting
    • May be applied with airless or conventional spray
    • Excellent as a lining for solvent storage
    • May be used as a weldable pre-construction primer
    • Exhibits long-term corrosion resistance
    • Ultra-low VOC level for solvent-based inorganic zincs

    Description:

    Ultra-low VOC member of the Carbozinc family with extraordinary corrosion resistance properties. Carbozinc 11 HS combines unparalleled performance characteristics with an ultra-low VOC formulation that meets some of the most stringent VOC restrictions.


  • Carbozinc 11 HSN

    Features:

    • Meets specific design criteria for nuclear Level 1 use
    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to handle in 1 hour at 75°F (24°C) and 50% relative humidity
    • Low temperature cure down to 15°F (-9°C)
    • High zinc loading
    • Available in Type III (ASTM D520) zinc dust
    • Very good resistance to salting
    • May be applied with standard airless or conventional spray equipment
    • VOC compliant to current AIM regulations

    Description:

    Ultra-low VOC member of the Carbozinc family with extraordinary performance characteristics. Carbozinc 11 HSN combines unparalleled performance properties with a 2.4 lbs/gallon (unthinned) and 2.7 lbs/gallon (thinned) formulation that meets even the most stringent VOC restrictions. This primer is nuclear-qualified and suitable for use as a primer for steel substrates in Level 1 containment exposures under specific design criteria. Determine applicability prior to use.


  • Carbozinc 11 SG

    Features:

    • Excellent corrosion and weathering protection.
    • High zinc loading per square foot.
    • Very good resistance to salting.
    • Meets nuclear requirements for level one areas.
    • Available in Type III (ASTM D520) zinc dust.

    Description:

    An inorganic zinc rich primer that protects steel galvanically, eliminating sub-film corrosion.


  • Carbozinc 11 VOC

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure. Dry to handle in 1 hour at 75°F (24°C) and 50% relative humidity.
    • Low temperature cure down to 0°F (-18°C).
    • High zinc loading.
    • Approved for MPI #19.
    • Meets FDA requirements.
    • Zinc supplied meets ASTM D520, Type II.*
    • Meets SSPC Paint 20 Type I, Level 1 for zinc content.
    • Very good resistance to salting.
    • May be applied with standard airless or conventional spray equipment.
    • VOC compliant in most areas.

    Description:

    Time -tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Carbozinc 11 VOC is simply a lower VOC version of the original Carbozinc 11 with VOC of 389 g/l as supplied.


  • Carbozinc 11 WB

    Features:

    • Excellent corrosion protection
    • High zinc loading per square foot
    • Zero VOC
    • Good resistance to salting
    • Fast curing, quick handling
    • Weldable version available Carboweld 11 WB
    • Excellent application characteristics (less likely to pump packing or tip plug)
    • Meets Class B slip coefficient and creep testing criteria for use on faying surfaces.

    Description:

    Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats.


  • Carbozinc 18 WB

    Features:

    • Outstanding corrosion protection
    • Zero VOC
    • Outstanding undercutting resistance
    • High zinc content
    • Permanent protection

    Description:

    Carbozinc 18 WB is a fast drying, high zinc content, coating for steel substrates. It has outstanding performance in demanding corrosive environments. It self heals to continue protection when damaged. It provides cathodic sacrificial protection and thus prevents corrosion of the underlying steel, like galvanizing. It contains 90% zinc dust by weight in the dried film. This waterborne product has no VOC or flash point. Use in industrial, marine, and process environments.


  • Carbozinc 585

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces up to 3 mils dry (See "Dry Film Thickness Section")
    • Excellent corrosion resistance
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Applies easily by spray methods
    • Meets SSPC Paint 20; Level 1
    • Excellent touch-up primer by brush or roller for small areas.
    • VOC compliant and low odor
    • Unlimited recoat

    Description:

    Low VOC, zinc-rich epoxy primer for steel substrates that provides excellent corrosion resistance. Carbozinc 585 has very low VOC values, is low odor and easy to apply. It can be used in virtually all industrial markets.


  • Carbozinc 608 HB

    Features:

    • High build, (5-10 mils DFT), pinhole free coating
    • High zinc loading per square foot
    • Provides cathodic protection plus durable barrier coating
    • Meets Class B Slip Coefficient
    • Excellent moisture tolerance during application and cure
    • Tolerant of marginal surface preparation
    • Fast cure response (topcoat and handle times)
    • Low temperature cure
    • Two components, less handling, less labor
    • MIO flake reinforced, stronger and better protection
    • Low VOC; Low HAPS
    • Excellent wetting properties and adhesion

    Description:

    This two-component, high build zinc-rich primer exhibits outstanding moisture tolerance during application, tolerance to marginal surface preparation, low temperature cure capability, and very fast cure time to speed up the painting process. It contains an inert flake reinforcement (micaceous iron oxide, MIO) to further enhance the coating's strength and performance. This coating is ideal for industrial and marine environments to provide galvanic corrosion protection for steel. It provides a Class B slip coefficient and an be applied as part of a two coat system instead of a typical three coat system of zinc primer, intermediate coat of epoxy, and finish coat of epoxy, polyurethane, etc. The labor, cure time, and materials required for the intermediate coat can be saved while providing similar or better dry film thickness and corrosion protection. Its fast cure properties makes it ideal for shop and field applications where quick throughput and turnaround times are desired.


  • Carbozinc 621 PW

    Features:

    • High level of zinc loading
    • Uses high purity ASTM D 520 Type III zinc dust
    • Excellent adhesion
    • Resists mudcracking
    • Excellent application properties
    • Superior undercutting protection
    • May be topcoated in 4 hours
    • Fast cold cure
    • Long recoat window
    • Tough durable film
    • VOC compliant to current AIM regulations
    • NSF/ANSI Standard 61 compliant
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

    Description:

    A two component moisture cured organic zinc-rich primer for protection of steel in salt and weathering environments. Excellent maintenance or general use zinc primer over commercially blasted steel. Certified for potable water immersion using a near white metal blast. Use as a shop primer where quick recoat and cure times are required. Carbozinc 621 PW is user friendly for field touch-up of inorganic zinc primers.


  • Carbozinc 808

    Features:

    • Rapid cure. Dry to recoat in 90 minutes at 75°F (24°C) and 50% relative humidity.
    • Low temperature cure down to 35°F (2°C)
    • Meets Class A slip co-efficient and creep testing criteria for use on faying surfaces
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Supplied as ASTM D520, Type II zinc
    • VOC compliant to current AIM regulations

    Description:

    A corrosion resistant, zinc containing primer with special reinforcing fillers. Carbozinc 808 is an excellent corrosion resistant, low VOC, fast cure to- topcoat primer with quick turnaround features for shop or field use. It can be used in moderate to corrosive applications for architectural, marine, and industrial markets.


  • Carbozinc 85

    Features:

    • High zinc loading
    • Excellent corrosion protection
    • Low VOC
    • Easy two-component mixing

    Description:

    Carbozinc 85 is a two component, polyamide, organic zinc filled coating designed to provide cathodic protection to steel in environments exposed to marine and industrial environments with severe weather and chemical fumes. Provides superior corrosion protection from undercutting. Excellent for use on structural steel, petrochemical applications, pulp and paper mills, bridges, piping, tanks, sewage treatment plants, electrical generating plants, and marine applications. Carbozinc 85 is QPL Approved under MIL-DTL-24441D for MIL-DTL-24441/19C, F-159 Type III; when manufactured at the registered location.


  • Carbozinc 858 (3K)

    Features:

    • Protects steel galvanically
    • Outstanding application properties
    • Cures at low temperatures down to 35°F(2ºC)
    • Tough and abrasion resistant film
    • Wide use in severe industrial or marine environments

    Description:

    A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. This low VOC, HAPs compliant primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround capabilities for the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.


  • Carbozinc 858 DOT

    Features:

    • Meets SSPC Paint System 20
    • Low temperature cure down to 35°F (2°C)
    • Protects against undercutting corrosion
    • Available in ASTM D520, Type III zinc version
    • May be applied with standard airless or conventional spray equipment
    • VOC compliant to current AIM regulations

    Description:

    Low VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 DOT has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications.


  • Carbozinc 859

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity.
    • Complies with SSPC Paint 20 (Type II)
    • Low temperature cure down to 35°F (2°C)
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Field proven primer that applies well by spray methods
    • Excellent touch-up primer by brush or roll for small areas.
    • VOC compliant to current AIM regulations
    • Approved for MPI #20

    Description:

    Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 3 lbs/gallon (359.5 g/l) VOC (thinned) and is used extensively in virtually all industrial markets.


  • Carbozinc 859 VOC

    Features:

    • Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity.
    • Complies with SSPC Paint 20 (Type II)
    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces up to 3 mils dry (See "Dry Film Thickness" section)
    • Low temperature cure down to 35°F (2°C)
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Available in ASTM D520, Type II zinc version
    • Field proven primer that applies well by spray methods
    • Excellent touch-up primer by brush or roll for small areas.
    • Extremely low VOC (less than 100 g/l)
    • Low HAPS (0.51 lbs/solid gal)

    Description:

    Ultra-low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 VOC has less than 100 g/l VOC (thinned) and can be used in virtually all industrial markets.


  • Carbozinc 861

    Features:

    • Excellent application properties
    • Low temperature cure down to 35°F (2°C)
    • 90% zinc dust in the dry film
    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Quick topcoatability
    • Meets most VOC regulations
    • Excellent adhesion
    • Protects against undercutting corrosion

    Description:

    A high solids, organic zinc primer with high zinc loading for the protection of steel substrates in salt or weathering environments. Used as a maintenance or general use primer over commercially blasted steel. Used for structural steel and equipment in pulp and paper, petrochemical, chemical processing and other severe environments with appropriate topcoat.


  • Carbozinc 8701

    Features:

    • Excellent application properties
    • Tough abrasion resistant film
    • Excellent adhesion & undercutting resistance
    • Superior corrosion resistance
    • Meets VOC (Volatile Organic Content) regulations
    • Fast drying for quick recoating

    Description:

    A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional or airless spray. Recommended for Original Equipment Manufacturers where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include marine, offshore drilling equipment, truck trailer chassis, underbodies and related equipment, industrial and off-road machinery, electrical transformers, industrial tanks, vessels, pumps and processing equipment.


  • Carbozinc 8703 (ASTM III)

    Features:

    • Welds made over Carbozinc 8703 coated steel are equal in every respect to welds made to uncoated steel.
    • Designed to protect steel during construction phase of projects under normal conditions.
    • Can be topcoated for additional long term protection for atmospheric exposures.
    • Weld spatter does not adhere to or damage the coating.
    • Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld.
    • Dries to touch and to handle in 3 to 5 minutes.
    • Utilizes Type III ultra pure, low-lead, zinc filler
    • Certified for potable water use under ANSI/NSF Standard 61 by Underwriters Laboratories (grey 0700 only)
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

    Description:

    Carbozinc 8703 may be used as a pre-construction primer, holding primer, or as a weldable steel primer for immersion service applications requiring ANSI/NSF 61 approval.


  • Caulk 100XT

    Features:

    • Superior Chemical Resistance
    • Outstanding elongation properties
    • Excellent bond strength assures good adhesion
    • Factory proportioned packaging ensures consistent high quality and simplified mixing
    • Long Pot Life
    • VOC Compliant in all U.S. states

    Description:

    Caulk 100XT is a highly flexible, two-component, 100% solids joint sealant with superior chemical resistance. It will withstand repeated expansion and contraction and remain resilient through daily and seasonal cyclic changes in temperature. Caulk 100XT is to be used as a specialty joint sealant designed for environments where resistance to spills of concentrated acids and most solvents is required.


  • Caulk 149

    Features:

    • Outstanding elongation properties
    • Long term abrasion and chemical resistance
    • Excellent bond strength assures good adhesion
    • Factory proportioned packaging ensures consistent high quality and simplified mixing
    • VOC Compliant in all U.S. states
    • USDA Compliant

    Description:

    Caulk 149 is a highly flexible, two-component, 100% solids, chemically resistant sealant. It will withstand repeated expansion and contraction and remain resilient through daily and seasonal cyclic changes in temperature. Caulk 149 is to be used as a general purpose expansion joint sealant designed for splash and spill and secondary containment of moderate strength acids, alkalis and some solvents typically found in industrial chemical processing.


  • Caulk PJS

    Features:

    • UV resistance
    • Fast installation
    • Excellent elongation properties
    • 10-20 minute shave time with a long open shaving window.
    • Durable
    • Cures in temperatures as low as -20°F (-29°C)
    • Variety of colors available
    • Suitable for use in USDA inspected facilities.

    Description:

    A UV resistant, 100% solids, two component, heavy duty, semi-rigid polyurea joint sealant designed for filling and protecting control joints and saw cut construction joints in industrial and commercial floors. Developed to fill typical construction joints in order to protect joint edges from spalling and to seal open joints. Using Carboseal Flex Joint will create a longer lasting floor and reduce the areas where bacteria can hide and grow. It has the unique benefit of being able to be shaved within minutes or up to 24 hours later.


  • Caulk PSC

    Features:

    • State of Florida: Secondary Containment Approval EQ-510
    • Long term abrasion and chemical resistance
    • Excellent bond strength assures good adhesion
    • Factory proportioned packaging ensures consistent high quality and simplified mixing
    • VOC Compliant in all U.S. states

    Description:

    Caulk PSC is a two-component, 100% solids, chemically resistant sealant. It will withstand repeated expansion and contraction and remain resilient through daily and seasonal cyclic changes in temperature. Caulk PSC is to be used as a general purpose expansion joint sealant designed for splash and spill and secondary containment of moderate strength acids, alkalis and some solvents typically found in industrial chemical processing.


  • C-FLEX 45

    Features:

    • High-copper ablative protection
    • Smooth polishing finish
    • Compatible over most bottom paints
    • VOC compliant
    • Meets current IMO standards as a TBT-Free and Cybutryne-Free Anti-Fouling System

    Description:

    A multi-season antifouling that combines controlled polishing ablative technology with a high copper content to provide a paint film strong enough to handle the tough marine environment from coast to coast. It provides long term protection and fuel efficiency in harsh marine environments.


  • Coating Disbonder 8512

    Features:

    • Practical to use when traditional coating removal methods such as abrasive blasting or power tool cleaning cannot be performed due to environmental or health concerns
    • Well-suited to remove thick-film elastomers such as polyurethanes and polyureas.
    • Is often a more economical removal method over abrasive blasting

    Description:

    A single component, water-based coating which is designed to remove thick-film elastomers from steel substrates.


  • CZ (WB) Neutralizing Solution

    Features:

    • Water-based, biodegradable
    • Easy to use
    • Prepares water-based inorganic zincs for topcoating

    Description:

    Carbozinc (water based) Neutralizing Solution is an organic and biodegradable product designed specifically for use with Carbozinc and Carboweld water-based, inorganic primers, including: Carbozinc 11 WB Carbozinc 18 WB Carboweld 9 WB Carboweld 11 WB Carboweld 14 WB It is an environmentally safe product that will clean, neutralize (lower the surface pH), and degrease the waterbased Carbozinc/weld primers for topcoating. This product does not contain any bleach, chlorinated solvents, phosphates, muriatic or ozone depleting ingredients.


  • Driquik 20

    Features:

    • Single component
    • Good corrosion protection
    • Fast dry
    • Low VOC
    • Low odor
    • Clean up with water
    • Good flexibility

    Description:

    A single component, fast dry primer with good corrosion protection. Waterborne formulation provides low VOC, low odor, and cleans up with water to eliminate solvents. Provides good flexibility and can be applied over a wide variety of substrates.


  • Driquik 24 DTM

    Features:

    • Single component
    • DTM Finish
    • Good corrosion protection
    • Fast dry
    • Low VOC
    • Low odor
    • Clean up with water
    • Good flexibility
    • Good weatherability

    Description:

    A single component, fast dry direct to metal (DTM) finish with good corrosion protection. Waterborne formulation provides low VOC, low odor, and cleans up with water to eliminate solvents. Provides good flexibility and weatherability. Can be applied over a wide variety of substrates. Can be applied over Driquik 20 primer for even better corrosion protection.


  • Driquik 3.5 Stencil Enamel

    Features:

    • Low VOC
    • Easy one coat coverage
    • Very fast dry
    • Brush and roll application

    Description:

    One component, low VOC, high gloss alkyd stencil coating that is applied by brush or roller to a previously top coated surface


  • Driquik Compliant CR Alkyd

    Features:

    • Fast Dry
    • Chemical Resistant
    • Anticorrosive

    Description:

    One component, fast dry alkyd, anticorrosion and chemical resistant coating


  • Driquik W/R VOC DTM

    Features:

    • Excellent water resistance
    • Low VOC
    • Easy one coat coverage
    • Excellent adhesion to metal
    • Resistant to spillage /splash of mild chemical
    • Flexible
    • Very fast dry
    • Heat Resistant

    Description:

    One component, water based, low VOC, low gloss, Direct to Metal (DTM) acrylic latex coating that provides an excellent moisture barrier.


  • EA-1 Aggregate

    Features:

    Description:


  • Filler 36 - Garnet Grit

    Features:

    Description:

    Non-skid garnet aggregate.


  • Filler 47

    Features:

    Description:

    Non-skid aluminum oxide aggregate filler.


  • Firefilm IV

    Features:

    • Designs for interior space
    • Smooth, decorative finish
    • Dust free surface
    • Durable finish
    • Fast recoat, increased production
    • Extremely low VOC content
    • LEED compliant
    • Extensive outgas testing for controlled cleanroom and sterile environments

    Description:

    A decorative thin film intumescent coating designed for the fire protection of interior steel columns for up to a 3 hour fire rating, depending on the design.


  • Flexxide Elastomer

    Features:

    • Resistant to wind-driven rain in two coats per Federal Specification TT-C-555B
    • Over 400% elongation
    • Chalk resistant, color retentive
    • Contains mildewcide
    • Stain resistant
    • Breathable
    • Easy to clean
    • Low odor, low VOC

    Description:

    A high-quality, 100% acrylic-copolymer elastomeric wall coating with excellent durability and superior flexibility which allows for expansion in concrete or masonry surfaces and bridges small cracks. Used as a high build exterior/interior finish for industrial or commercial use on concrete and many other substrates.


  • FP-Fiberglass Mesh

    Features:

    Description:

    FP-Fiberglass Mesh is a high strength fiberglass reinforcing mesh designed for use with Thermo-Lag® intumescent fireproofing products.


  • Galoseal WB

    Features:

    • Single component
    • Low odor, low VOC
    • Contains no heavy metals or mineral acids
    • Extended recoat time
    • Accepts two-component solvented coatings
    • Fast dry to topcoat
    • Approved MPI #134

    Description:

    Water-based acrylic primer used to promote adhesion over galvanized and other nonferrous metal substrates. Unique formula has very low VOC and can be top coated with two-component solvented epoxies and polyurethanes.


  • Gelcoat 800

    Features:

    • Exceptional resistance to inorganic and organic acids
    • Excellent caustic and alkaline solution resistance
    • Excellent abrasion resistance and hardness
    • FDA compliant
    • Low permeability

    Description:

    An optional pigmented gel coat that can be applied to the cured Protecto-Flake 800 lining to provide a very smooth surface sometimes required to prevent the vessel contents from adhering. It also provides an added measure of protection from product contamination.


  • Gelcoat 900

    Features:

    • Exceptional resistance to inorganic and organic acids
    • Excellent abrasion resistance and hardness
    • Low permeability

    Description:

    An optional pigmented gel coat that can be applied to the cured Protecto-Flake 900 lining to provide a very smooth surface sometimes required to prevent the vessel contents from adhering. It also provides an added measure of protection from product contamination.


  • Glass Flake Additive

    Features:

    • Excellent durability
    • Excellent chemical resistance
    • Added as a separate filler as needed
    • Improves internal film strength
    • Improves impact resistance
    • Provides non-skid properties

    Description:

    Glass flake additive is used as a special reinforcing filler for any number of coatings to impart special or improved properties. The addition of glass flake can improve film toughness, improve flexibility, strengthen internal film properties, provide non-skid characteristics, and improve impact and cutting resistance.


  • Grip Tight

    Features:

    Description:


  • High Temp Mesh

    Features:

    Description:

    High Temp Mesh is an open leno weave, 99+% carbon content, high temperature mesh used as a reinforcing media with Thermo-Lag®, Pyroclad® and Thermo-Sorb® intumescent fireproofing products. The mesh is supplied with a coated finish to enhance handling.


  • High Wear Filler

    Features:

    • Provides non-skid properties
    • Excellent durability
    • Easy to mix; non-settling filler
    • No constant agitation needed
    • Non-sparking filler

    Description:

    Non-metallic; non-silica based non-skid filler


  • Hydroplate 1080

    Features:

    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600*
    • Conforms to multiple AWWA D102 ICS systems
    • One coat application - Up to 20 mils in a single coat
    • Excellent moisture tolerance during application
    • Low-temperature cure (20 °F)
    • Superior corrosion resistance in potable water immersion
    • Low VOC

    Description:

    High performance immersion grade epoxy specifically designed for water storage and treatment. High solids formulation provides superior edge retention and corrosion resistance. Meets the requirements of various AWWA standards making it ideal for use on numerous treatment, storage, and conveyance assets.


  • Hydroplate 1086

    Features:

    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600*
    • Meets the requirements of AWWA C210
    • Conforms to multiple AWWA D102 ICS and OCS systems
    • Low VOC and HAPs
    • Suitable for service in moderate wastewater environments
    • Excellent thermal shock resistance
    • Good abrasion resistance
    • Suitable for use in SCAQMD restricted areas

    Description:

    High solids epoxy used as a lining and exterior coating for potable water and wastewater assets. The advanced formula provides ultimate corrosion protection in a high solids coating that has tremendous ease of application properties. Product is self-priming and is frequently applied to steel, concrete, and ductile iron substrates.


  • Hydroplate 1100

    Features:

    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600*
    • Conforms to multiple AWWA D102 ICS 3
    • Batch mix formulation, single-leg airless spray
    • High impact resistance
    • Superior adhesion properties
    • Excellent abrasion resistance and flexibility
    • Can be applied down to 35 °F (2 °C)
    • Can be applied as a single or multi-coat system
    • Non-blushing with a extended recoat window
    • Fast return to service for potable water application

    Description:

    This product is a proprietary high performance epoxy coating designed as an internal tank, valve, fitting, and pipe lining for the water and wastewater markets. It has a unique blend of resins and curing agents that allow batch mixing, eliminating the need for plural component spray equipment. This blush-resistant lining is typically applied at film thicknesses of 20 mils (500 microns) or thicker and can cure at temperatures down to 35°F (2°C). It is resistant to potable water, raw water, industrial process water, wastewater, and sewage. This product is ideal for water storage, municipal wastewater, and water treatment facilities.


  • Hydroplate 6500

    Features:

    • Ultra high build - Up to 250 mils in a single coat
    • Batch mix formulation, single-leg airless spray
    • High impact resistance
    • Superior adhesion properties
    • Excellent abrasion resistance and flexibility
    • Can be applied as a single or multi-coat system
    • Fast return to service
    • Passes ASTM G210 - Severe Wastewater Analysis Test (SWAT)
    • Meets the requirements of AWWA C210
    • Glass flake and ceramic reinforced
    • Color formulation validates consistent mix
    • Low temperature cure

    Description:

    Designed as a premium-grade, ultra-durable epoxy lining, Hydroplate 6500 is ideally suited for use on both concrete and steel surfaces in aggressive, hydrogen sulfide rich municipal and industrial wastewater environments. This reinforced, high-build epoxy offers swift return-to-service times and the convenience of single leg application. Hydroplate 6500 ensures exceptional longevity with its remarkably low permeability and outstanding chemical resistance, guaranteeing long-term durability and performance.


  • MIO Filler

    Features:

    • Excellent durability
    • Excellent non-reactive, chemical resistant filler
    • Improves internal film strength
    • Improves impact resistance
    • Added as a separate filler as needed

    Description:

    Micaceous iron oxide filler is used as a special reinforcing filler for any number of coatings to impart special or improved properties. The addition of micaceous iron oxide can improve film toughness, improve flexibility, strengthen internal film properties, impart better permeation resistance properties due to its flake-like structure, and improve impact and cutting resistance.


  • Multi-Gard 955 CP

    Features:

    • Low odor
    • Very high solids
    • Excellent wetting and flow properties
    • Easy 1:1 mix ratio
    • One coat system for a variety of substrates including CMU
    • VOC compliant to current AIM regulations

    Description:

    A solvent-free epoxy designed and uniquely formulated for use as a coating for aluminum casting quench pit environments. It has been tested by the Aluminum Association and found suitable for this use. In many cases it can be used as a one-coat system direct to steel or concrete. Has excellent wetting and flow properties and can be spray, brush or roller applied. It has a workable pot life (90 minutes at 75°F) and while plural spray equipment may be used, it is not required.


  • Non-Skid Filler #1

    Features:

    • Provides non-skid properties
    • Excellent durability
    • Easy to mix; non-settling filler
    • No constant agitation needed
    • Non-sparking filler

    Description:

    Non-metallic; non-silica based non-skid filler


  • Phenoline 1205

    Features:

    • Excellent resistance to ethanol, gasoline, jet fuels and solvents.
    • Excellent abrasion resistance.
    • Excellent thermal shock resistance (0 to 300° F).
    • VOC compliant to current AIM regulations.
    • Excellent resistance to deionized or demineralized water up to 203°F (95°C).
    • Excellent resistance to crude oil up to 250°F (121°C).
    • Excellent for crude oil storage and transportation up to 250° F (121° C)
    • Recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control Corrosion Under Insulation (CUI).

    Description:

    Glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. 1205 exhibits very good acid resistance. Excellent for use as a lining for tanks or pipes in process facilities where hot water or abrasive conditions exist.


  • Phenoline 187 VOC

    Features:

    • High solids; Low VOC formula
    • VOC compliant to current AIM regulations
    • Excellent overall chemical resistance
    • Excellent for crude-oil storage
    • Excellent resistance up to 400°F(204°C)
    • Excellent abrasion & thermal shock resistance
    • Meets the FDA requirements for 21CFR 175.300 for direct food contact
    • Passes EI 1541 jet fuel gum test
    • Complies with MIL-PRF-4556F testing

    Description:

    High solids epoxy lining with exceptional chemical resistance. Primarily as a tank lining, it is recommended for storage of crude oil (180°F/82°C), demineralized water (150°F/65°C), tap water (200°F/93°C) food and beverage industries, and water and wastewater exposures. Is excellent as a protective coating under insulation, operating at (400°F/204°C). Outstanding resistance to wet/dry cycling conditions at these elevated temperatures.


  • Phenoline 309

    Features:

    • Single coat application reduces labor costs
    • Ultra-high build capabilities provides a void-free film and excellent edge protection
    • Wide chemical resistance to acids, caustics and aliphatic solvents
    • Can be mat reinforced where exposure conditions dictate
    • Application by airless spray equipment (plural component acceptable but not required)
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, airless-applied, ultra-high build coating for use on steel and concrete substrates subject to aggressive chemical fume and spill exposure. Phenoline 309 provides exceptional resistance to thermal shock and abrasion, and has found wide acceptance in a broad variety of heavy industrial applications.


  • Phenoline 310

    Features:

    • Rapid cure-to-handle and cure-to-service characteristics
    • Low temperature (35°F) cure capabilities
    • Single coat application reduces labor costs
    • Ultra-high build capabilities provides a void-free film and excellent edge protection
    • Wide chemical resistance to acids, caustics and aliphatic solvents
    • Exceptional bond strength
    • Can be mat reinforced where exposure conditions dictate
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, plural-component applied, ultra-high build coating for use on steel and concrete substrates where rapid cure characteristics are required. Phenoline 310 is applied by plural component spray equipment and offers the same high performance properties of Phenoline 309, yet in a quick-curing formulation.


  • Phenoline 311 Primer

    Features:

    • Low temperature cure (20°F)
    • Excellent blast-hold protection
    • Suitable for use over damp concrete
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Meets VOC restrictions
    • Low HAP’s content
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

    Description:

    A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks and relines. It exhibits excellent surface wetting characteristics and quick cure for handling. It contains high levels of inert flake reinforcement. Excellent for use as a bonding primer for linings when damp concrete or masonry substrates are encountered.


  • Phenoline 333

    Features:

    Description:

    Phenoline 333 is a low bake, high solids, modified epoxy formulated for use as a protective lining with excellent resistance to molten sulfur. Excellent chemical and thermal shock resistance.


  • Phenoline 353

    Features:

    • Outstanding overall chemical resistance
    • Dense, highly cross-linked film for superior barrier protection
    • Excellent abrasion resistance and toughness
    • Well-suited for hydrocarbon exposures
    • Low temperature cure version available

    Description:

    Phenoline 353 is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used is both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, and many others.


  • Phenoline 353 LT

    Features:

    • Outstanding overall chemical resistance
    • Dense, highly cross-linked film for superior barrier protection
    • Excellent abrasion resistance and toughness
    • Well-suited for hydrocarbon exposures
    • Cures down to 35°F (2°C)
    • Meets NORSOK System 7C Requirements for subsea equipment up to 356°F (180°C)

    Description:

    Phenoline 353 LT is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used in both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, subsea oil and gas equipment, and many others. This low temperature cure formulation allows application and curing down to 35°F (2°C).


  • Phenoline 379

    Features:

    • Single coat application reduces labor costs
    • Ultra-high build capabilities provides a voidfree film and excellent edge protection
    • Resistant to inorganic and organic acids, caustics and most solvents
    • Can be mat reinforced where exposure conditions dictate
    • Application by airless spray equipment (plural component acceptable but not required)
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, airless-applied, ultra-high build coating for use on steel and concrete substrates subject to aggressive chemical exposure. Phenoline 379 has the same application and physical properties of Phenoline 309 but provides enhanced chemical protection for a broader and more concentrated range of acids.


  • Phenoline 385

    Features:

    • High solids; Low VOC formula
    • VOC compliant to current AIM regulations
    • Excellent for crude-oil storage
    • Excellent resistance to petroleum products
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Complies with MIL-PRF-4556F testing
    • Fully compliant with the EI1541 performance requirements for Aviation Fuel Handling Systems (commonly known as the Jet Fuel Gum Test)

    Description:

    High performance, high solids, epoxy lining that is recommended for a variety of petroleum storage products including 180°F (82°C) crude oil, demineralized water 150°F (65°C), crude/water mixtures, fuel oil, jet fuel, biodiesel, and gasoline. It is also a good choice for wastewater and water exposures. Product is self-priming and is normally applied in two coats. It is also suitable for food-grade (aqueous) cargos and meets the FDA requirements for 21CFR 175.300 for direct food contact.


  • Phenoline Pileguard

    Features:

    • Batch mix formulation, single leg airless spray
    • High impact resistance
    • Superior adhesion to steel
    • Excellent resistance to water and salt water
    • Excellent abrasion resistance and flexibility
    • Performance consistent with Corp of Engineers C-200 coatings
    • Can be applied down to 35 °F (2 °C)
    • Can be applied as a single or multi-coat system
    • Non-blushing with a long recoat window
    • Low odor

    Description:

    This high performance epoxy coating is specifically designed to protect steel submerged in seawater, such as sheet piling and buried piles. Made up of a unique blend of resins and curing agents, Phenoline Pileguard facilitates single leg application, eliminating the need for plural component spray equipment. The product is blush resistant and is typically applied at a film thickness of 20 mils or thicker as needed.


  • Phenoline Tank Shield

    Features:

    • Batch mix formulation, single leg airless spray
    • High impact resistance
    • Superior adhesion to steel
    • Excellent resistance to water and salt water
    • Resistance to a broad range of fuels
    • Passes EI 1541 requirements for internal protective coating systems used in aviation fuel handling systems, including the jet fuel gum test
    • Adheres to API 653 inspection and API 652 guidelines for inspection intervals.
    • Resistant to hot water up to 180°F (82°C)
    • Excellent abrasion resistance and flexibility
    • Can be applied down to 35 °F (2 °C)
    • Can be applied as a single or multi-coat system
    • Non-blushing with a long recoat window
    • Low odor

    Description:

    This product is a solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Plural component spray equipment is not required. The product is blush resistant and is typically applied at film thicknesses of 20 mils (500 microns) or thicker as needed (tank floors). It can handle exposures typically seen in the oil and gas industries; crude oils and fuels. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for municipal wastewater and water treatment facilities.


  • Phenoline Tank Shield FP

    Features:

    • Highly penetrating formula to handle severe pitting
    • Blast hold protection
    • Batch mix formulation, single leg airless spray.
    • Superior adhesion to steel
    • Excellent abrasion resistance and flexibility
    • Can be applied down to 35°F/2°C
    • Can be used with multiple lining systems
    • Non-blushing with a long recoat window
    • Convenient packaging for batch mix
    • Low odor
    • Meets drinking water criteria of NSF/ANSI/CAN 600

    Description:

    This product is high performance epoxy coating specifically designed as a pit filling primer with ideal flow properties allowing it to wet-out and fill moderate to severe pitting on steel tank bottoms. It's unique formula allows simple batch mixing for ease of application. With an appropriate lining, it can handle exposures typically seen in the oil and gas industries. It is resistant to crude oil, NGL condensates, produced water, brines, and industrial process water.


  • Phenoline Tank Shield Plus

    Features:

    • Excellent petrochemical resistance (fuels and crude)
    • High impact resistance
    • Superior adhesion to steel
    • Excellent hot water resistance
    • Excellent abrasion resistance
    • Can be applied as low as 35°F (2°C)
    • Tolerates low temperature excursions to 20°F (-7°C) during cure
    • Can be applied as a one-coat 20-80 mil system
    • Recommended as a petroleum tank bottom lining per API recommended practice 652.
    • Tank Shield Plus is a thick film reinforced lining proven to provide integrity at greater than 50 mils
    • Non-blushing, single or multi-coat system
    • Recommended as a petroleum tank bottom lining per API recommended practice 653.

    Description:

    This product is a solvent free, low temperature cure, high performance epoxy lining designed to handle common cargoes in the oil and gas industry including crude oil, gasoline, jet fuels, and diesel. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for Municipal wastewater and water treatment facilities. It can handle deionized water up to 180°F (82°C) and is applied at film thicknesses of 20-80 mils (500-1500 microns) in a non-blushing, single coat application. Tank Shield Plus has good elongation and proprietary reinforcement which enables it to bridge perforations which may occur from bottom side corrosion. Tank Shield Plus remains water tight over a hole in 2 atmospheres of head pressure.


  • Plasite 1010 Clear

    Features:

    Description:

    A one-package system (no curing agent required) seal coat for application to inorganic zinc primers to prevent a too rapid deterioration of free zinc from the coating surface. Ideal for tank linings where clear solvents are stored where zinc pick-up can be detrimental to storage.


  • Plasite 2310

    Features:

    • Outstanding for caustic service
    • Good chemical resistance to solvents, acids and alkalies
    • Excellent flow and leveling

    Description:

    Cross-linked epoxy-phenolic cured with an alkaline curing agent, formulated with a wide range of chemical resistance and ease of handling. Plasite 2310 is a two-coat system whereby the final coat is heated to 180°F (82°C) to complete the final cure.


  • Plasite 3054

    Features:

    • Excellent high temperature performance for production tubing in downhole environments.

    Description:

    Straight baking phenolic formulated as a high-build chemical resistant coating.


  • Plasite 3070

    Features:

    • Superior resistance to acids and solvents
    • Conforms to many of the current VOC regulations
    • Meets the requirements of the U.S. Food and Drug Administration, 21 CFR 175.300 for use in direct food contact areas.

    Description:

    A bake coating using an unmodified phenolic resin with superior resistance to acids and solvents. Conforms to many of the current VOC regulations.


  • Plasite 3070 L

    Features:

    Description:

    A bake coating using a phenolic resin (baked, unmodified) with superior resistance to sulfuric acid and solvents. Conforms to most VOC regulations. Tank lining for solvent, concentrated sulfuric acid, hot water, food products and as a protective coating for machinery parts, filter press plates, fans, etc. PLASITE 3070 L meets the FDA requirements for 21 CFR, 175.300.


  • Plasite 3070 LB

    Features:

    • Widely accepted polymer with successful history
    • VOC compliant
    • Improves productivity with lower bake temperature
    • Same familiar application as Plasite 3070 L
    • Batch mix ease

    Description:

    A baked on coating using a phenolic resin (baked, unmodified) with superior resistance to sulfuric acid and solvents. Conforms to most VOC regulations. A lining for tanks containing solvent, concentrated sulfuric acid, hot water, and as a protective coating for machinery parts, filter press plates, fans, etc.


  • Plasite 3073

    Features:

    • High solids, Low VOC formula
    • Excellent abrasion resistance
    • Resistant to a wide range of acids, chemicals, and solvents
    • Excellent thermal shock resistance
    • Resistant to concentrated sulfuric acid
    • Excellent for transportation equipment

    Description:

    A high solids phenolic lining offering superior resistance to acids, chemicals, solvents and salts. Conforms to FDA Title 21 CFR 175.300.


  • Plasite 4007

    Features:

    • Excellent resistance to organic and inorganic acids, salts, gasoline and crude oil

    Description:

    PLASITE 4007 is a high chemical resistant coating. May be used as a light colored topcoat for 4300 or as a multi-coat coating system with or without the option of incorporating fiberglass cloth reinforcement.


  • Plasite 4100

    Features:

    • Exceptional resistance to inorganic and organic acids
    • Thick film for tank lining service
    • Excellent abrasion resistance and hardness
    • Handles dry heat to 380 °F (193 °C)
    • Meets FDA requirements for 21 CFR 175.300 and 177.2420
    • Excellent caustic resistance

    Description:

    Plasite 4100 is a high performance lining-grade coating reinforced with inert flake pigments combined with a special curing system to provide outstanding chemical resistance and physical properties. It has exceptional resistance to inorganic and organic acids, oxidizing agents and salts. It can handle dry heat up to 380 °F (193 °C) and will resist condensing acid vapors (sulfuric) typically found in FGD (flue gas desulfurization) systems.


  • Plasite 4110

    Features:

    • Meets the criteria of NSF/ANSI/CAN 600

    Description:

    Vinyl ester resin combined with special curing system and inert flake pigment to provide outstanding chemical and physical properties. Specially formulated for excellent abrasion resistance. PLASITE 4110 meets the FDA requirements for 21 CFR, 175.300 and 177.2420 and is suitable for potable water service per NSF Std. 61. Uses: As a high chemical abrasion-resistant thick film for tank lining service and as a maintenance coating for severe exposure.


  • Plasite 4300

    Features:

    Description:

    Plasite 4300 is a vinyl ester resin combined with special curing system and inert flake pigment to provide outstanding chemical and physical properties. Intended for use as a high chemical-resistant thick film for tank lining service and as a maintenance coating for severe exposure.


  • Plasite 4301 HT

    Features:

    • Outstanding resistance to aggressive chemicals
    • Suitable for use as a highly chemically resistant lining
    • Excellent for splash, spill and film exposures on structural steel
    • Glass-flake reinforced film
    • High tensile and flexural strength
    • High film thickness

    Description:

    This high performance glass-flake filled coating was designed for application over steel or concrete in extreme chemical exposures. It is resistant to a wide variety of aggressive chemicals, including organic and inorganic acids, most alkalies, and many solvents. It is ideally suited for immersion service as internal steel tank linings, as well as for aggressive chemical splash, spill, and fume exposures on structural steel. Typical uses include steel tank and vat linings, secondary containment, structural steel, process floors, grating, sumps and trenches, scrubbers, and clarifiers.


  • Plasite 4310

    Features:

    • Outstanding acid immersion performance
    • Solvent immersion lining
    • High temperature resistance
    • Performs under thermal shock
    • Extremely high abrasion resistance
    • self priming
    • High build

    Description:

    Plasite 4310 is a vinyl ester resin combined with special curing system and inert flake pigment to provide outstanding chemical and physical properties. Plastic 4310 is specially formulated for excellent abrasion resistance while retaining temperature, chemical and other physical properties of Plasite 4300.


  • Plasite 4500

    Features:

    • High impact resistance
    • Superior adhesion to steel
    • Resistance to a broad range of chemicals
    • Can be applied as low as 35°F/2°C
    • Can be applied as a one-coat 20-60 mil system
    • NSF/ANSI 61 compliant for use in potable water tanks, pipes, and valves.*
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
    • Meets AWWA C210 requirements for use in water supply pipeline and valves
    • Passes ASTM G210 - Severe Waste Water Analysis Tests (SWAT)

    Description:

    PLASITE 4500 is a solvent free, flake-reinforced, high performance epoxy coating designed as an internal tank lining for chemical or other commodity storage. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, many acids and some solvents. Excellent versatility allows for potable water and water treatment immersion service.


  • Plasite 4500 FS

    Features:

    • Quick walk on time
    • Fast return to service
    • Excellent edge retention
    • Superior adhesion to steel
    • Resistance to a broad range of chemicals
    • Will cure down to 20°F/-7°C
    • Can be applied as a single-coat 20-60 mil system
    • Passes EI 1541 jet fuel gum test.

    Description:

    PLASITE 4500 FS is a solvent-free, edge retentive and high performance epoxy coating designed as an internal tank lining for chemical or other commodity storage. It is a two-component system applied by plural component spray equipment, at film thicknesses of 20-60 mils (500-1500 microns) in a monolithic application. It is particularly suited for petroleum-based cargoes including crude oil; fuel oils and gasoline storage. It has extremely fast cure times for turnaround projects that require placing back in service quickly and will cure down to 20F(-7C). The product has a unique ability to be applied as a prime coat and immediately back-rolled after spraying. This is recommended to treat pitted steel, weld areas, and the like. A second coat can be applied right after the prime coat using the same product for a “two-coat” yet monolithic application.


  • Plasite 4500 S

    Features:

    • High impact resistance
    • Superior adhesion to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied in a one-coat application up to 60 mils
    • Can be sprayed using single component airless equipment
    • VOC compliant
    • Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
    • Certified by UL to meet the drinking water criteria of NSF 61
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

    Description:

    Plasite 4500 S is a 100% solids, flake-filled, premium epoxy coating designed for internal steel and concrete tanks and pipe lining. Suitable for sheet piling, H and pipe pilings in marine immersion and splash zones.


  • Plasite 4540

    Features:

    • Quick walk on time
    • Fast return to service
    • Excellent edge retention
    • Superior adhesion to steel
    • Blush resistant
    • Resistance to a broad range of chemicals
    • Excellent hot water resistance
    • Can be applied to substrate as low as 35°F/2°C
    • Can be applied as a single-coat 20-50 mil system

    Description:

    This product is a solvent-free, edge retentive, blush-resistant high performance epoxy coating designed as an internal tank lining for chemical or other commodity storage. It is a two-component system applied by plural component spray equipment, at film thicknesses of 20-50 mils (500-1250 microns) in a monolithic application. It is particularly suited for petroleum-based cargoes including crude oil; fuel oils, gasoline and gasoline blends, jet fuel and diesel. It has excellent hot water resistance (deionized water up to 180°F/82°C). It has extremely fast cure times for turnaround projects that require placing back in service quickly. The product has a unique ability to be applied as a prime coat and immediately back-rolled after spraying. This is recommended to treat pitted steel, weld areas, and the like. A second coat can be applied right after the prime coat using the same product for a “two-coat” yet monolithic application.


  • Plasite 4550

    Features:

    • High Impact Resistance
    • Superior adhesion to metal substrates and concrete
    • Outstanding adhesion to stainless steel, even with low blast profiles
    • Well suited to protect alloy steels typically used to wet FGD systems where pitting and crevice corrosion often occur
    • Fast cure-to-service; depending upon application can be placed into service within 36 hours
    • Minimal blushing characteristics
    • Can be applied in temperatures as low as 35 °F (1.7 °C)
    • Can be applied as a one-coat system
    • Tested and approved for crude oil transportation up to 350 °F (177 °C)
    • Superior thermal shock resistance from -40 to 350 °F (-40-177 °C)
    • Complies with the API RP 652 definition of a reinforced liner.

    Description:

    PLASITE 4550 is a 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid.


  • Plasite 4550 FP

    Features:

    • Broad spectrum chemical resistance
    • Excellent flow and wetting
    • Superior adhesion
    • Fast cure-to-topcoat
    • Long recoat window
    • Blush resistant formulation
    • Resistant to ethanol services*

    Description:

    A high solids, premium novolac epoxy flow primer specifically designed for use under Plasite 4550 HT when lining pitted floors. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, and sour crude oil.


  • Plasite 4550 HT

    Features:

    • Broad spectrum chemical resistance
    • Superior adhesion to metal substrates and concrete
    • High Impact Resistance
    • Fast cure-to-service; depending upon application can be placed into service overnight
    • Excellent performance in high temperature cathodic protection
    • Blush resistant formulation
    • Cures below freezing temperature
    • Can be applied as a one-coat system
    • Complies with the API RP 652 definition of a reinforced liner.

    Description:

    PLASITE 4550 HT is a high solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, and sour crude oil.


  • Plasite 4550 S

    Features:

    • High impact and thermal shock resistance
    • Superior adhesion to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied up to 60 mils in one coat
    • Can be sprayed using single component airless equipment
    • Passes ASTM G210 - Severe Waste Water Analysis Test (SWAT)

    Description:

    PLASITE 4550 S is a 100% solids, flake filled, premium novolac epoxy coating designed for internal steel and concrete substrates. It is a two component system consisting of four-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, from a total thickness of 20-60 mils (500-1500 microns) in a single coat application for a variety of applications. This product has been tested and is approved for crude oil storage and transportation up to 350°F (177°C). It has superior thermal shock resistance over the range -40° to 350°F (-40 to 177°C). Typical Uses: Crude oil tankers, chemical storage tanks, wastewater clarifiers, plating vats, oil storage tanks, catwalks, pulp and paper liquor tanks or concrete exposures in wastewater applications.


  • Plasite 4555 S

    Features:

    • High impact resistance
    • Superior bond strength to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied in a one-coat application up to 30 mils/.75 mm
    • Easily repaired using inter-coat prep procedures

    Description:

    Plasite 4555 S is a 100% solids, flake-filled, premium novolac epoxy coating designed for internal steel and concrete tanks and pipe lining. It is a two component system consisting of 4-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, in a one-coat application (25-30 mils) for internal lining applications.


  • Plasite 5302

    Features:

    • Cures quickly
    • Form an exceptionally tough, impact and abrasion resistant surfaces
    • Excellent adhesion to concrete, steel and wood
    • Non-shrinking
    • Minimum down time
    • Excellent resistance to water, oil, brine, most acids and alkalies

    Description:

    Plasite 5302 is an epoxy monolithic liner formulated for chemical and abrasion resistance in continuous immersion service.


  • Plasite 5371

    Features:

    • Trowel or spray applied
    • Non-sagging liner
    • Can be applied to steel or concrete (damp or dry)
    • Protective liner in one coat application on vertical, horizontal or overhead surfaces
    • Passes ASTM G210 - Severe Waste Water Analysis Tests (SWAT)

    Description:

    Formulated for optimum chemical resistance to the chemical exposures found in the immersion and highly corrosive environments of municipal wastewater treatment.


  • Plasite 7122

    Features:

    • Versatile coating with wide chemical resistance
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Excellent resistance to fuels
    • Long history of performance
    • Self-priming

    Description:

    This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance.


  • Plasite 7122 TFE

    Features:

    • Versatile coating with wide chemical resistance
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Excellent resistance to fuels
    • Long history of performance
    • Self-priming

    Description:

    This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance. It has superior release properties to reduce or avoid issues with product cargoes such as sticking, hang-ups or bridging.


  • Plasite 7122 VAR

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Superior abrasion resistance and good flexibility
    • Complies with FDA 21CFR 175.300 criteria for food contact

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VAR, is an abrasion resistant tank lining and industrial maintenance coating.


  • Plasite 7122 VOC

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Very good abrasion resistance and flexibility
    • Complies with FDA 21CFR 175.300 criteria for food contact

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VOC is used as a tank lining and for industrial maintenance.


  • Plasite 7122 VTF

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Smooth non-stick surface.
    • Very good abrasion resistance and flexibility.
    • Complies with FDA 21CFR 175.300 criteria for food contact.

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VTF, is a PTFE filled tank lining for use where the surface requires release properties to reduce product sticking and bridging.


  • Plasite 7133 HS

    Features:

    • Plasite 7133 HS will not impart taste or odor to such products as sugar solutions, wine, beer, meat products and similar items.
    • This coating is resistant to the standard cleaning for sanitation purposes and will withstand normal atmospheric steam cleaning procedures.
    • Plasite 7133 HS meets the FDA requirements for 21 CFR 175.300 for direct aqueous food contact.

    Description:

    A combination of epoxy and polyamide resins with selected pigments designed specifically as a high chemical resistant, non-toxic, odorless coating.


  • Plasite 7159

    Features:

    • Easy-to-apply high performance thin film lining
    • Protects I high temperature demineralized water immersion - 212°F (100°C)
    • Recommended in high pressure three phase service up to 250°F (121°C)
    • Can be air dried or force cured for prompt service

    Description:

    A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry.


  • Plasite 7159 HAR

    Features:

    • Easy-to-apply high performance thin film lining
    • Protects I high temperature demineralized water immersion - 212°F (100°C)
    • Recommended in high pressure three phase service up to 250°F (121°C)
    • Can be air dried or force cured for prompt service
    • Outstanding abrasion resistance

    Description:

    A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. This HAR version of Plasite 7159 is extremely abrasion resistant.


  • Plasite 7240

    Features:

    • Excellent resistance to a wide range of chemicals and water solutions

    Description:

    An epoxy primer cured with a polyamine curing agent and formulated with special pigmentation to produce a cured film having electrical conductivity. A conductive primer for application to nonconductive substrates prior to topcoating with one of the Plasite conductive coatings or conductive floor surfacers.


  • Plasite 729

    Features:

    • Formulated with fluorocarbon pigmentation to provide excellent release and mass flow properties while maintaining temperature and chemical resistance
    • Meets FDA requirements for 21 CFR, 175.300

    Description:

    PLASITE 729 is a two-component high build coating based on epoxy resins and a polyamide curing agent. Formulated to provide the end user with a coating that has excellent adhesion and superior flexibility while conforming to current VOC regulations. Plasite 729 is designed as an internal lining for hoppers, silos or covered hopper cars storing or transporting bulk chemicals and dry food products.


  • Plasite 729 TFE

    Features:

    Description:

    PLASITE 729TFE is a two-component high build coating based on epoxy resins and a polyamide curing agent. Formulated to provide the end user with a coating that has excellent adhesion and superior flexibility while conforming to current VOC regulations. PLASITE 729TFE is specially formulated with fluorocarbon pigmentation to provide excellent release and mass flow properties while maintaining temperature and chemical resistance properties of PLASITE 729. PLASITE 729TFE meets FDA requirements for 21 CFR, 175.300. Plasite 729TFE is designed as an internal lining for hoppers, silos or covered hopper cars storing or transporting bulk chemicals and dry food products. FOR INDUSTRAIL USE ONLY.


  • Plasite 9052

    Features:

    • Primary use is as a tank lining for water
    • Applications include deionized or distilled water at elevated temperatures, as well as use with brines, petroleum processes and products
    • High solids, Low VOC product
    • Excellent chemical resistance to crude oil, alkalis, and other various fuels

    Description:

    A low VOC water-resistant epoxy coating polymerized with a polyamine curing agent. Primarily as a tank lining for water, including deionized or distilled water at elevated temperatures, as well as use with brines, petroleum processes and products.


  • Plasite 9053

    Features:

    • Low VOC
    • Water-resistant
    • Protection in high temperature brine solutions
    • Complies with the United States Food and Drug Administration 21 CFR 175.300 for direct food contact use.

    Description:

    A low VOC water-resistant epoxy coating polymerized with a polyamine-type curing agent. Primarily as a tank lining for water, including deionized or distilled water at elevated temperatures. Special pigmentation provides additional film undercutting protection in high temperature brine solutions. Complies with the requirements of the United States Food and Drug Administration 21 CFR 175.300 for direct food contact use.


  • Plasite 9060

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents
    • Very good abrasion resistance and flexibility
    • Complies with FDA 21 CFR 175.300 criteria for food contact

    Description:

    A high solids modified epoxy cured with an amine adduct curing agent. Designed specifically as a highly chemical-resistant, non-toxic, tank lining.


  • Plasite 9060 HAR

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents
    • Superior abrasion resistance and flexibility
    • Complies with FDA 21 CFR 175.300 criteria for food contact

    Description:

    Designed specifically as a tank lining coating where high abrasion and chemical resistance is required.


  • Plasite 9085

    Features:

    Description:

    A high solids modified epoxy novolac cured with a polyamine curing agent. Designed specifically as a highly chemical-resistant coating for concentrated sulfuric acid immersion service.


  • Plasite 9133

    Features:

    • Meets FDA requirements for 21CFR 175.300 for Aqueous food contact
    • VOC compliant to current AIM regulations
    • Excellent for crude-oil storage
    • Excellent resistance to petroleum products
    • Excellent abrasion resistance
    • Excellent thermal shock resistance

    Description:

    High solids epoxy cured with a polyamine-type curing agent formulated for a wide range of chemical resistance and ease of handling.


  • Plasite 9145

    Features:

    • Excellent resistance to a wide range of latex resin solutions

    Description:

    A high solids epoxy cured with an amine curing agent. Formulated with particular attention to latex resin resistance with the Plasite 9145 TFE version available to provide superior release properties.


  • Plasite 9145 TFE

    Features:

    • Excellent resistance to a wide range of latex resin solutions

    Description:

    A high solids epoxy cured with an amine curing agent. Formulated with particular attention to latex resin resistance with special modification to provide superior release properties. Plasite 9145 TFE is used as a second coat over Plasite 9145 when additional release properties are desired or required.


  • Plasite 9200 HAR

    Features:

    • Excellent resistance to a wide range of chemicals and water solutions.

    Description:

    Plasite 9200 HAR is a high solids, self-priming epoxy, cured with an amine curing agent and formulated with special pigmentation to produce an abrasion resistant film with a degree of electrical conductivity.


  • Plasite 9500

    Features:

    • An easy-to-apply chemical resistant internal tank lining
    • Chemical resistance to a wide range of solvents, alkalies, hot water, acids, brines, crude oil, fatty acids and food products
    • Meets the FDA requirements for 21 CFR, 175.300

    Description:

    A high temperature bake, high solids, modified epoxy cured with an amine curing agent.


  • Plasite 9570

    Features:

    • Meets the requirements of US Food & Drug Regulations 21 CFR 175.300
    • Excellent chemical resistance to all caustic solutions up to 200 °F (93 °C) and to a wide range of acids, solvents and water solutions

    Description:

    Plasite 9570 is a highly resistant film for chemical tank lining service. Specifically formulated for excellent abrasion resistance while retaining temperature, chemical and other physical properties to provide greater release properties to aid in the prevention of product hang-up or bridging problems.


  • Plasite 9571

    Features:

    • Excellent resistance to caustic solution

    Description:

    A low temperature bake, high solids, epoxy phenolic cured with an amine curing agent.


  • Plasite 9573

    Features:

    Description:

    This lining is a highly resistant film for chemical tank lining service. It has excellent resistance to many caustic solutions up to 200°F (93°C), combined with chemical resistance to a wide range of acids, solvents and water solutions. Consult Carboline for specific cargo.


  • Plasite Thinner #15

    Features:

    Description:


  • Plasite Thinner #19

    Features:

    Description:


  • Plasite Thinner #20

    Features:

    Description:


  • Plasite Thinner #201

    Features:

    Description:


  • Plasite Thinner #30

    Features:

    Description:


  • Plasite Thinner #4

    Features:

    Description:


  • Plasite Thinner #46

    Features:

    Description:


  • Plasite Thinner #68

    Features:

    Description:


  • Plasite Thinner #70

    Features:

    Description:


  • Plasite Thinner #71

    Features:

    Description:


  • Plasite Thinner #98

    Features:

    Description:


  • Plasite XAR 470

    Features:

    • Hard, tough, durable film
    • Outstanding adhesion
    • One coat high build protection
    • Extreme abrasion resistance
    • High compressive strength
    • Very high flexural strength
    • Broad spectrum chemical resistance
    • Edge retentive
    • Batch mix for small areas

    Description:

    PLASITE XAR 470 uses a ceramic filler matrix to offer extreme abrasion and cutting resistance. Fused by a proprietary epoxy novolac resin this thick film epoxy lining protects in highly corrosive and physically abusive environments.


  • Plasite XHT 400

    Features:

    • High temperature and pressure resistance
    • Exceptional wear resistance
    • Excellent performance in Steam Out service
    • Outstanding adhesion
    • Single coat protection
    • Batch mix application
    • Fast return to service
    • Thin film protection
    • Suitable for use on fire tubes and knock out drums
    • Suitable for use on molten sulfur rail cars

    Description:

    A single coat lining fortified with Supoxy®, an advanced resin technology, champions exceptional chemical and heat resistance. This intricately crosslinked lining establishes a resilient barrier tailored for demanding service conditions, including firetubes, heater-treaters, knockout drums, separators, and the containment of molten sulfur.


  • PLASKLEEN-A

    Features:

    Description:

    Plaskleen-A is a cleaning solution used in conjunction with Plasite 3070, 3070 L and 3076. When the surface to be coated has previously been in sulfuric acid service, Plaskleen-A must be used.


  • Polyclad 767

    Features:

    • Fast curing rate increases throughput
    • Superior wetting properties result in better edge retention and excellent adhesion to steel
    • Mix ratio of 1:1 and user friendly application properties
    • Unlimited build with single multi-pass coats
    • Self priming (120 mil maximum for potable water)
    • Meets AWWA C222
    • UL approved for ANSI/NSF Std. 61 potable water

    Description:

    Polyclad 767 is a top-tier pipe coating engineered for superior performance in safeguarding both pipeline interiors and exterior pipes. Specifically formulated to excel in various applications, this cutting-edge coating is designed to provide exceptional protection for water transmission pipelines, wastewater treatment facilities (both municipal and industrial), and interior tank linings. Elevating its versatility, Polyclad 767 extends its protective prowess to include exterior pipe services, ensuring comprehensive coverage for both the interior and exterior surfaces.


  • Polyclad 777 Fast-Set

    Features:

    • Fast curing rate increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio 1:1 and user friendly application properties
    • Can be topcoated with Carbothane series of products
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222
    • Compliant with EN 10290

    Description:

    Polyclad 777 Fast Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Polyclad 777 PL

    Features:

    • Fast curing increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio of 1:1 with easy application properties
    • Can be topcoated with Carbothane series of products
    • Unlimited film build with single or multi-pass coats

    Description:

    Polyclad 777 PL is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Typical uses include pipeline exterior surfaces. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a fast-set cure mechanism. No primer is required.


  • Polyclad 777 PL Fast-Set

    Features:

    • Fast curing increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio of 1:1 with easy application properties
    • Can be topcoated with Carbothane series of products
    • Unlimited film build with single or multi-pass coats

    Description:

    Polyclad 777 PL Fast-Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Typical uses include pipeline exterior surfaces. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a fast-set cure mechanism. No primer is required.


  • Polyclad 777 Slow-Set

    Features:

    • Fast curing increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio 1:1 and user friendly application properties
    • Can be topcoated by Carbothane series of products
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222
    • Compliant with EN 10290

    Description:

    Polyclad 777 Slow Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Polyclad 777R

    Features:

    • Low temperature cure
    • Quick cure to handle
    • Superior wetting properties and outstanding adhesion to steel
    • Excellent edge retention
    • Mix ratio of 1:1 and user friendly application properties
    • Up to 80 mils build with a single application
    • Can be topcoated with Carbothane series of products for long-term color and gloss retention

    Description:

    Polyclad 777 R is a high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. It can be used on steel pipe exteriors, coating girth welds on steel pipe and other repairs as recommended.


  • Polyclad 956

    Features:

    • Improves flow efficiency in gas pipes
    • Meets API RP5L2 requirements for gas transmission pipeline flow liner
    • Excellent flow and leveling
    • Single-coat application
    • Hard, smooth, glossy finish
    • Excellent abrasion resistance
    • Corrosion prevention during storage

    Description:

    A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. It has excellent flow and wetting characteristics ideal for this type of application and use. Tested in accordance with API RP 5L2 for gas transmission pipelines.


  • Polyclad 975

    Features:

    • Quick dry to touch and QC times
    • Color indicator confirms proper mixing
    • Low temperature cure 40°F (4.4°C)
    • Excellent cathodic protection performance
    • Film build up to 50 mils DFT in one coat
    • Excellent edge retention
    • Superior adhesion to steel
    • Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
    • Can be applied by spray, brush, roller or dual cartridge

    Description:

    Polyclad 975 is an advanced 100% solids, hybrid epoxy pipeline coating. Polyclad 975 has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. It can be used for new pipe or rehabilitation of coated pipe. Polyclad 975 cures fast to allow quick QC and backfill times.Polyclad 975 is designed for spray application. Use Polyclad 975 H for hand applied applications.


  • Polyclad 975 H

    Features:

    • Quick dry to touch and QC times
    • Good brush and roll properties
    • Color indicator confirms proper mixing
    • Low temperature cure 40°F (4.4°C)
    • Excellent cathodic protection performance
    • Film build up to 30 mils DFT in one coat
    • Excellent edge retention
    • Superior adhesion to steel
    • Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
    • Can be hand applied by brush or roller

    Description:

    Polyclad 975 H is an advanced 100% solids, hybrid epoxy pipeline coating. It has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. Polyclad 975 H cures fast to allow quick QC and backfill times. H in 975 H stands for hand applied version. Polyclad 975 is the spray version.


  • Polyclad ARO H

    Features:

    • Excellent gouge and abrasion resistance
    • High crosslink density results in tough film
    • Excellent adhesion to prepared FBE, Polyclad 975 and other coatings
    • Protects FBE during directional drilling applications
    • 100% solids
    • Hand applied to 50 mils (1.3 mm) in one application
    • Rapid dry to handle
    • Fast cure to service

    Description:

    Polyclad ARO H is a high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. Polyclad ARO H is a field applied version of Carboline's Polyclad ARO. It may be applied directly over existing pipe coatings as an abrasion resistant overlay (ARO). Polyclad ARO H is suitable for hand application making it ideal for field coating of girthwelds or repair areas. It can also be applied directly to the steel pipe surface when required. It provides superior protection in rocky, rough and mountainous environments by absorbing the destructive energy and minimizing coating damage.


  • Polyclad Line Stabilizer

    Features:

    Description:

    Liquid plasticizer to prevent isocyanate catalyzation in spray lines.


  • Polymer Alloy 2000

    Features:

    • Meets all VOC Requirements
    • Low Odor/Solvent Free Compliant
    • USDA compliant
    • Stain Resistant with good cleanability
    • Can be seeded for anti-skid surface
    • Can Saturate Fiberglass Reinforcement for Better Crack Bridging Properties

    Description:

    A multi-functional semi-self leveling epoxy floor topping. Polymer Alloy 2000 uses a moisture-tolerant primer and a flexible semi-self-leveling epoxy topcoat to achieve a strongly bonded monolithic topping with moderate chemical resistance to splash and spillage, and good physical and mechanical properties.


  • Polymer Alloy 2000C

    Features:

    • Meets all VOC requirements
    • Conductive
    • Low odor
    • Semi-self leveling to a high gloss finish at 20 mils
    • Stain resistant with good cleanability
    • Conductive anti-skid available

    Description:

    A 100% solids, multi-functional semi-self leveling epoxy floor topping. Polymer Alloy 2000C uses a moisture-tolerant conductive primer and a flexible conductive semi-self leveling topcoat to achieve a strongly bonded flooring system with moderate chemical resistance, good physical and mechanical properties and static discharge properties.


  • Polymer Alloy 2000LE

    Features:

    • Industry standard for low cured emissions
    • Meets all VOC Requirements
    • Low Odor/Solvent Free Compliant
    • USDA Compliant
    • Semi-Self Leveling
    • Stain Resistant with Good Cleanability
    • Can be Seeded for Anti-Skid Surface
    • Can Saturate Fiberglass Reinforcement for Better Crack Bridging Properties

    Description:

    Polymer Alloy 2000LE is a flexible, semi-self leveling, 100% solids epoxy floor topping with industry-leading low emissions testing. It is strongly bonded monolithic coating with moderate chemical resistance and good physical and mechanical properties. This product develops a cured strength 2-3 times that of the concrete base to which it is applied to provide exceptional durability and prolong the life of the substrate.


  • Polymer Alloy 2000SD

    Features:

    • Dissipative in the range of 1 x 106 to 109 ohms
    • Meets all VOC requirements
    • Low odor/Solvent-free compliant
    • USDA compliant
    • Stain-resistant with good cleanability
    • Can be broadcast into for non-skid surface (conductive aggregate only)

    Description:

    A static dissipative, semi self-leveling novolac epoxy floor topping engineered to instill electrostatic control characteristics. This product uses a moisture-tolerant primer to achieve a strongly bonded monolithic topping with moderate chemical resistance to splash and spillage, and good physical and mechanical properties.


  • Polymer Carbide

    Features:

    • Good overall chemical resistance
    • Simple troweled application
    • Zero VOC
    • Excellent adhesion
    • Superior abrasion resistance

    Description:

    A ceramic carbide epoxy putty designed to resistance against severe abrasion, impact and cavitation. It resists a wide variety of chemicals and reinforces wear-plates in material handling service.


  • Polymer Concrete 100

    Features:

    • Exceptional strength and durability
    • Excellent chemical resistance to a wide range of chemicals
    • High resistance to abrasion
    • Extremely low shrinkage

    Description:

    A three-component, epoxy mortar that is well suited for the construction of floors or structures requiring resistance to dilute acids, alkalis, and other corrosive chemicals. The material exhibits excellent bond strength to concrete and physical properties at least 3 times that of standard concrete. Suitable for use in areas exposed to heavy traffic and abuse.


  • Polymer Concrete 100XT

    Features:

    • Exceptional strength and durability
    • Excellent chemical resistance to a wide range of chemicals
    • High resistance to abrasion
    • Extremely low shrinkage

    Description:

    A three-component, epoxy mortar that is well suited for the construction of floors or structures requiring resistance to mild acids, alkalis, and other corrosive chemicals. The material exhibits excellent bond strength to concrete and physical properties at least 3 times that of standard concrete. Suitable for use in areas exposed to heavy traffic and abuse.


  • Polymer Concrete 800

    Features:

    • Exceptional strength and durability
    • Excellent chemical resistance to a wide range of chemicals
    • High resistance to abrasion
    • Extremely low shrinkage

    Description:

    A three-component, vinyl ester mortar that is well suited for the construction of floors or structures requiring resistance to mild acids, alkalis, and other corrosive chemicals. The material exhibits excellent bond strength to concrete and physical properties at least 3 times that of standard concrete. Suitable for use in areas exposed to heavy traffic and abuse.


  • Polymer Concrete 900

    Features:

    • Exceptional strength and durability
    • Excellent chemical resistance to a wide range of chemicals
    • High resistance to abrasion
    • Extremely low shrinkage

    Description:

    A three-component, novolac vinyl ester mortar that is well suited for the construction of floors or structures requiring resistance to strong acids, alkalis, solvents and other corrosive chemicals. The material exhibits excellent bond strength to concrete and physical properties at least 3 times that of standard concrete. Suitable for use in areas exposed to heavy traffic and abuse.


  • Polymer Quartz

    Features:

    Description:

    Grout shall be epoxy based material supplied with an appropriate hardener and graded silica aggregate as manufactured by Dudick Inc. Installation shall be in accordance with the manufacturer's recommended practices.


  • Polymer Steel EG

    Features:

    • Rapid cure for service (dry to touch in 1 hour)
    • Convenient half kit packaging to reduce waste
    • Good overall chemical resistance
    • Simple troweled application
    • High build capabilities
    • Zero VOC
    • Excellent adhesion
    • Excellent abrasion resistance
    • Sandable

    Description:

    An emergency grade, multi-functional epoxy putty for applications where downtime is minimal. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.


  • Polymer Steel MG

    Features:

    • Good overall chemical resistance
    • Simple troweled application
    • Machinable in 2-4 hours
    • Zero VOC
    • Excellent adhesion
    • Excellent abrasion resistance
    • Sandable

    Description:

    A machine grade epoxy putty for repairing damaged shafts, valves, and other mated metal surfaces. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.


  • Polymer Steel RG

    Features:

    • Good overall chemical resistance
    • Simple troweled application
    • High build capabilities
    • Zero VOC
    • Excellent adhesion
    • Excellent abrasion resistance
    • Sandable

    Description:

    A rebuild grade, multi-functional epoxy putty for restoring eroded or cavitated areas of metal to its original contour. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.


  • Polymer Steel SG

    Features:

    • Smooth, slick finish
    • Corrosion and galvanic resistant
    • Good overall chemical resistance
    • High build capabilities
    • Zero VOC
    • Exceptional adhesion
    • Excellent abrasion resistance

    Description:

    A surface grade, fluid applied epoxy coating used to provide both corrosion and erosion protection for degraded steel substrates. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.


  • Primer 27

    Features:

    • Can minimize outgassing on concrete
    • Promotes higher adhesion values between the substrate and lining material
    • Low viscosity promotes increased wet out of surface
    • Long pot life
    • Long recoat window (5 days @ 75°F/23°C)
    • Primer for polyester and vinyl ester systems

    Description:

    A primer designed to provide improved adhesion when installing high performance linings over properly prepared concrete and steel. It lowers the chances of outgassing when used over concrete and can be used as a holding primer for abrasive blasted steel.


  • Primer 27C

    Features:

    Description:

    Primer 27C is a two-component conductive vinyl ester primer designed to be used over concrete whenever the coating or lining system must be spark tested for pinholes.


  • Primer 67

    Features:

    • Tolerant to moisture vapor transmission (2 / 2)
    • Meets most VOC Requirements
    • Low Odor
    • User Friendly

    Description:

    A high solids epoxy primer for steel and concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.


  • Primer 67 DPLV

    Features:

    • Tolerant to moisture vapor transmission (2 / 2)
    • Densifies concrete surface
    • Low VOC
    • Low Odor
    • Meets SCAQMD Rule 1113 for VOC content
    • VOC Compliant with LEED 4.1

    Description:

    A low VOC, deep penetrating epoxy primer for dense concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. Can be used to densify the surface of concrete.


  • Primer 67C

    Features:

    • Tolerant to moisture vapor transmission (2 / 2)
    • Meets most VOC Requirements
    • Low Odor
    • User Friendly

    Description:

    A high solids conductive epoxy primer for concrete, used in place of traditional primers when the coating or lining system must be holiday tested. It is also used as part of conductive flooring systems, intended to dissipate stray electrical current by running excess current to ground. In both uses, it increases adhesion and reduces the potential for outgassing on concrete substrates.


  • Primer 67DTO

    Features:

    • Meets most VOC Requirements
    • Distinct, Low Odor
    • User Friendly
    • Tolerant to moisture vapor transmission (2 / 2)

    Description:

    A high solids epoxy primer for concrete and steel that has previously been exposed to oils, grease, or fats. Specially designed to increase adhesion and reduce the potential for outgassing in high performance containment and linings systems


  • Primer 67LV

    Features:

    • Tolerant to moisture vapor transmission (2 / 2)
    • Low VOC
    • Low Odor
    • Meets SCAQMD Rule 1113 for VOC content
    • VOC Compliant with LEED 4.1

    Description:

    A low VOC epoxy primer for concrete and steel. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.


  • Primer 67SD

    Features:

    • Tolerant to moisture vapor transmission (2 / 2)
    • Meets most VOC Requirements
    • Low Odor
    • User Friendly

    Description:

    A high solids static dissipative epoxy primer for concrete. It is used as part of static dissipative flooring system, intended to dissipate stray electrical current by running excess current to ground. It increases adhesion and reduces the potential for outgassing on concrete substrates.


  • Protecto-Coat 100XT

    Features:

    • Broad spectrum chemical resistance
    • Superior adhesion to metal substrates and concrete
    • Blush resistant formulation
    • Meets all VOC Requirements
    • Can be seeded with Sand or Aluminum Oxide for Anti-Skid

    Description:

    Protecto-Coat 100XT is a 100% solids, flake-filled, high functionality, novolac epoxy coating. The novolac epoxy binder and overlapping flake fillers in Protecto-Coat 100XT provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.


  • Protecto-Coat 105XT

    Features:

    • Broad spectrum chemical resistance
    • Superior adhesion to metal substrates and concrete
    • Blush resistant formulation
    • Meets all VOC Requirements
    • Can be seeded with Sand or Aluminum Oxide for Anti-Skid

    Description:

    A High-performance, 100% solids, low odor, environmentally safe novolac epoxy coating. Protecto-Coat 105XT uses a moisture-tolerant primer and two coats of low temperature cure, graphite flake-filled novolac epoxy resin to protect concrete and metal substrates. The novolac epoxy binder and overlapping flake filler provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.


  • Protecto-Coat 1130

    Features:

    • Meets all VOC Requirements
    • High strength and high abrasion resistance
    • Low odor
    • Excellent solvent resistance, including methylene chloride and ethylene dichloride

    Description:

    A 100% solids, reinforced, premium epoxy coating for use as an internal tank lining. This product utilizes a hybrid curing agent to form a highly functional, densely cross-linked monolithic film. It is resistant to extremely corrosive solvents.


  • Protecto-Coat 325HB

    Features:

    • Meets all VOC Requirements
    • 100% Solids
    • Can be seeded with Sand or Aluminum Oxide for Anti-Skid.

    Description:

    A 100% solids, flake-filled epoxy resin to protect concrete and metal substrates. The epoxy binder and overlapping flake fillers provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.


  • Protecto-Coat 500

    Features:

    • Complies with Greenbook
    • Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
    • Cold temperature cure
    • Fast cure and walk on time
    • Excellent barrier properties, low permeability
    • Single-coat application 20 to 125 mils
    • Bridges normal shrinkage cracks in concrete
    • Monolithic, protective film for protection of steel and concrete
    • Outstanding abrasion, impact and tear resistance
    • Commonly used for Waffle Decks, where it can be cut away when needed.

    Description:

    Plural-component applied coating used as a lining in the technology manufacturing facilities to protect the substrate from traffic and moderate chemical exposure. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.


  • Protecto-Coat 800

    Features:

    • Exceptional resistance to inorganic and organic acids
    • Excellent caustic and alkaline solution resistance
    • Excellent abrasion resistance and hardness
    • FDA compliant
    • Low permeability

    Description:

    A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It offers the most versatile protection in the Protecto-Coat line.


  • Protecto-Coat 800AR

    Features:

    • Superior abrasion resistance and hardness
    • Exceptional resistance to inorganic and organic acids
    • Excellent caustic and alkaline solution resistance
    • Low coefficient of friction
    • FDA compliant
    • Low permeability

    Description:

    A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It is formulated for higher abrasion resistance than standard Protecto-Coat 800.


  • Protecto-Coat 800HT

    Features:

    • High temperature resistance
    • Exceptional resistance to inorganic and organic acids
    • Excellent caustic and alkaline solution resistance
    • Low coefficient of friction
    • FDA compliant
    • Low permeability

    Description:

    A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It is formulated for a higher wet immersion temperature resistance than standard Protecto-Coat 800.


  • Protecto-Coat 805

    Features:

    • Excellent resistance to fluorinated chemicals
    • Exceptional resistance to inorganic and organic acids
    • Excellent caustic and alkaline solution resistance
    • Excellent abrasion resistance and hardness
    • FDA compliant
    • Low permeability

    Description:

    A vinyl ester resin formulated specifically as a silica free lining and utilizes graphite flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions.


  • Protecto-Coat 900HT

    Features:

    • Low Permeability
    • High Temperature Resistance
    • Excellent Chemical Resistance

    Description:

    Protecto-Coat 900HT uses two or three layers of thermosetting, glass flake filled, novolac vinyl ester resin to build up the protection that metal and concrete need in chemical manufacturing or processing operations. When fully cured, the separate elements lose their individual identity and become a single, monolithic coating.


  • Protecto-Coat 900HT Plus

    Features:

    • Low Permeability
    • High Temperature Resistance
    • Excellent Chemical Resistance

    Description:

    Protecto-Coat 900HT Plus uses two or three layers of thermosetting, glass flake filled, novolac vinyl ester resin to build up the protection that metal and concrete need in chemical manufacturing or processing operations. When fully cured, the separate elements lose their individual identity and become a single, monolithic coating.


  • Protecto-Coat EPG

    Features:

    • Excellent overall chemical resistance
    • Easily applied by spray
    • Acceptable for use over stainless steel
    • Excellent barrier protection

    Description:

    A self-priming amine-cured, epoxy phenolic, glass flake-filled coating designed for use in highly corrosive environments where abrasion and chemical resistance is required. This product also exhibits excellent heat resistance.


  • Protecto-Coat PS

    Features:

    • Resistance to vibration, impact, shock, and thermal cycling
    • May be used to repair polyurethane linings
    • Flexible
    • Chemical Resistant
    • VOC Compliant

    Description:

    A two-component, high solids, elastomeric, chemically resistant polysulfide coating.


  • Protecto-Crete 140T BC

    Features:

    • Low Odor
    • VOC Compliant
    • Can be used for Coving, Pitch and Curb Construction
    • 100% Solids

    Description:

    A heavy duty novolac epoxy mortar used for high-impact protection and slope to drain in chemical processing areas.


  • Protecto-Flake 800

    Features:

    • Excellent abrasion resistance
    • Excellent chemical resistance
    • FDA Compliant
    • Very Low Permeability

    Description:

    A high molecular weight vinyl ester resin based lining also filled with large diameter glass flakes which provides exceptionally low permeability. It is used in high temperature and high abrasion environments.


  • Protecto-Flake 900

    Features:

    • Superior chemical resistance
    • Excellent abrasion resistance
    • FDA Compliant
    • Very Low Permeability

    Description:

    A high molecular weight novolac vinyl ester resin based lining also filled with large diameter glass flakes which provides exceptionally low permeability. It is used in high temperature and high abrasion environments.


  • Protecto-Flex BC

    Features:

    • Bridges surface cracks up to 100 mils in concrete
    • Flexibilized system
    • Can be broadcast into for increased abrasion resistance and anti-slip properties
    • Chemical Resistant
    • Water Resistant
    • Meets all stringent VOC requirements

    Description:

    A flexibilized epoxy resin that, when mixed with silica filler, will reduce the coefficient of expansion and provide a thixotropic base on which to embed fabric reinforcement. The added flexibility provides strength when bridging small surface cracks and increases resistance to thermal shock.


  • Protecto-Glass 860

    Features:

    • Exceptional resistance to inorganic and organic acids
    • Excellent caustic and alkaline solution resistance
    • Excellent abrasion resistance and hardness
    • FDA compliant
    • Low permeability
    • Conductive system available (Protecto-Glass 865)

    Description:

    A high-performance, highly chemical resistant lining that uses several layers of thermosetting, filled vinyl ester resin to build up protection on metal and concrete. It is well suited for chemical manufacturing or processing operations. Used as a component of a system with fiberglass reinforcement, the separate elements lose their individual identity and become a single, monolithic lining.


  • Protecto-Line 800

    Features:

    • Exceptional resistance to inorganic and organic acids
    • Excellent caustic and alkaline solution resistance
    • Excellent abrasion resistance and hardness
    • FDA compliant
    • Low permeability

    Description:

    A high-performance, highly chemical resistant lining that uses several layers of thermosetting, filled vinyl ester resin to build up protection on metal and concrete. It is well suited for chemical manufacturing or processing operations. Blended with different fillers and used as a component of a system with woven roving, the separate elements lose their individual identity and become a single, monolithic lining.


  • Pyroclad X1

    Features:

    • Full jet fire certification in accordance with ISO 22899
    • Excellent hydrocarbon pool fire protection (ISO 834/BS-476)
    • LR, DNV & ABS certification
    • Successfully passed Norsok M-501 System 5A environmental test program without a topcoat
    • Superior weathering resistance
    • Very low moisture absorption
    • Explosion resistance
    • Extremely durable, impact resistant finish
    • High film build properties
    • Low flame spread and smoke development

    Description:

    Pyroclad X1 is designed to provide jet fire and hydrocarbon fire protection for structural elements, beams, columns, bulkheads, underdecks and risers. Pyroclad X1 is suitable for applications in the industrial, petrochemical, oil and gas, offshore and refining industries.


  • Pyrocrete 239

    Features:

    • Combined acoustical and fire protection
    • Easily applied by spray or trowel
    • Excellent physical properties – hard, durable
    • Nonflammable – during or after application
    • Asbestos-free – complies with EPA and OSHA regulations
    • Chloride and sulfide free – no special priming required
    • Non-friable – high impact strength
    • Single package – mixed with clean, potable water at the job site
    • Investigated for exterior use by Underwriters Laboratories, Inc
    • Quality Manufactured – under strict Carboline quality standards
    • UL factory inspection service

    Description:

    A medium density, Portland cement based, cementitious fireproofing that is mixed with clean, potable water onsite before application and spray applied to the substrate. It provides 1-4 hour fire protection for structural steel members and upgrades the fire resistance of existing concrete. It can also be used as a thermal barrier over polyurethane foam. Recommended areas of application include pharmaceutical facilities, pulp and paper mills, nuclear and conventional power plants, factories, warehouses, stadiums, institutional and biomedical facilities and acoustical applications.


  • Pyrocrete 241

    Features:

    • Over 40 years of proven performance
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • Jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • UL 2431 Category I-A Outdoor Heavy Industrial and Exterior Environmental Purpose
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 55 lb./ft³ (881 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 241 HD

    Features:

    • Heavy duty, ultra high density formulation
    • Highest durability and toughness on the market
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 70 lb./ft³ (1,121 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 241 HY

    Features:

    • Cost effective, high yield
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 50 lb./ft³ (800 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 341

    Features:

    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated from 30 minutes to 2 hours
    • ISO 20088-1 cryogenic spill protection to -50°C
    • Resistant to 4 bar blast overpressure
    • ISO 20088-1 cryogenic spill followed by ISO 22899-1 jet fire
    • 4 bar overblast followed by third party witnessed hydrocarbon fire
    • NFPA 290 simultaneous torch and hose stream resistant (extended to 150 minutes)
    • UL 2431 Category I-A Outdoor Heavy Industrial and Exterior Environmental Purpose
    • Lightweight - one-third the weight of concrete
    • Ideal for field and shop application
    • Enhanced application characteristics (3/4" - 1 1/2" (19 - 38.1 mm) on initial pass)
    • Excellent durability with early hardness development
    • Non-friable – high impact strength
    • Asbestos-free – complies with EPA and OSHA regulations

    Description:

    A minimum average 52 lb./ft³ (833 kg/m³) density, portland cement-based fireproofing material that provides hydrocarbon pool fire, jet fire, and cryogenic spill protection for structural steel. Recommended areas of application include refineries, petrochemical, and LNG facilities.


  • Pyrocrete 40

    Features:

    • Cost effective fireproofing solution
    • Outstanding coverage, high build
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • BS 476 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A minimum 40 lb./ft³ (640 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Railplex 1.8 VOC HB Urethane

    Features:

    • Excellent Weathering resistance
    • Single coat direct to metal urethane
    • Very Low HAPS
    • Low VOC
    • Easy one coat coverage
    • Excellent adhesion
    • Very good resistance to corrosion and spillage /splash of mild chemicals
    • Very flexible
    • Excellent Gloss

    Description:

    A 4:1, high solids, two component, direct-to-metal (DTM) polyurethane coating. This coating is designed to provide very good corrosion, UV and chemical resistance in a one coat system.


  • Railplex 2.0 Alkyd Primer

    Features:

    • Single coat direct to metal high solids
    • Very Low HAPS & VOC
    • Easy one coat high build coverage
    • Excellent adhesion
    • Very good resistance to corrosion
    • Ready to use viscosity

    Description:

    A single package high solids alkyd primer designed to provide very good corrosion resistance and dry speed for rail car exterior. Wide flexibility to various top coats.


  • Railplex 2.8 LH Enamel

    Features:

    • Single coat high solids direct to metal or top coat
    • Very Low HAPS & VOC
    • Easy one coat high build coverage
    • Excellent adhesion
    • Very good resistance to corrosion
    • Ready to use viscosity
    • Good color and gloss retention
    • Excellent initial gloss

    Description:

    A single package high solids gloss alkyd Direct to Metal (DTM) or top coat designed to provide very good corrosion resistance, weathering and dry speed for railcar exterior.


  • Railplex 2.8 LH Non-Skid

    Features:

    • Non-Slip Deck Coating
    • Easy One Coat High Build Coverage
    • Excellent Adhesion to Steel & Concrete
    • Good Corrosion Resistance
    • Outstanding wear resistance
    • Self-priming over most existing coatings
    • Very Low Haps

    Description:


  • Railplex EE-2020

    Features:

    • Single coat direct to metal high solids epoxy
    • Very Low HAPS
    • Easy one coat high build coverage
    • Excellent adhesion
    • Very good resistance to corrosion and spillage /splash of mild chemical
    • Good initial gloss and very good color & gloss retention

    Description:

    A 1:1, high solids polyamide epoxy designed to provide very good corrosion resistance as a single coat, direct-to-metal (DTM) exterior coating for rail cars and other structures. While all epoxies will chalk and yellow under UV exposure, this coating has better color and gloss retention than traditional epoxies.


  • Railplex EE-2020 PC

    Features:

    • Single coat direct to metal high solids epoxy
    • Very Low HAPS
    • Easy one coat high build coverage
    • Excellent adhesion
    • Very good resistance to corrosion and spillage /splash of mild chemical
    • Good initial gloss and very good color & gloss retention
    • Ready to use viscosity

    Description:

    A 1:1, high solids polyamide epoxy designed to provide very good corrosion resistance as a single coat, direct-to-metal (DTM) exterior coating for railcars and other structures. While all epoxies will chalk and yellow under UV exposure, this coating has good color and gloss retention better than most.


  • Railplex EE-2020 PT

    Features:

    • Single coat direct to metal high solids epoxy
    • Very Low HAPS
    • Easy one coat high build coverage
    • Excellent adhesion
    • Very good resistance to corrosion and spillage /splash of mild chemical
    • Good initial gloss and very good color & gloss retention
    • Ready to use viscosity

    Description:

    A 1:1, high solids polyamide epoxy designed to provide very good corrosion resistance as a single coat, direct-to-metal (DTM) exterior coating for railcars and other structures. While all epoxies will chalk and yellow under UV exposure, this coating has good color and gloss retention better than most.


  • Railplex GATX Epoxy

    Features:

    • Single coat direct to metal high solids epoxy
    • Low VOC & HAPS
    • Easy one coat high build coverage
    • Excellent adhesion
    • Very good resistance to corrosion and spillage /splash of mild chemicals

    Description:

    A 1:1, high solids polyamide epoxy designed to provide very good corrosion resistance as a single coat, direct-to-metal (DTM) exterior coating for railcars and other structures. When all epoxies will chalk and yellow under UV exposure, this coating has good color and gloss retention better retention better than most.


  • Railplex LV Colorcoat

    Features:

    • Excellent Weathering resistance
    • Very Low HAPS
    • Low VOC
    • Easy one coat coverage
    • Excellent adhesion
    • Very good resistance to corrosion and spillage /splash of mild chemical
    • Very flexible
    • Excellent color fastness

    Description:

    A 5:1, high solids, two component, polyurethane color coat coating. This coating is designed to provide very good corrosion, UV and chemical resistance as a middle coat, used with a primer and a clearcoat.


  • Railplex TX Urethane DTM

    Features:

    • Excellent Weathering resistance
    • Single coat direct to metal urethane
    • Very Low HAPS
    • Low VOC
    • Easy one coat coverage
    • Excellent adhesion
    • Very good resistance to corrosion and spillage /splash of mild chemicals
    • Very flexible
    • Excellent Gloss

    Description:

    A 4:1, high solids, two component, direct-to-metal (DTM) polyurethane coating. This coating is designed to provide very good corrosion, UV and chemical resistance in a one coat system.


  • Reactamine 760

    Features:

    • UL approved for ANSI/NSF Std. 61 potable water*
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
    • Complies with 21 CFR 175.300 Method D, E, & G and Direct Dry Food Contact
    • Complies with Greenbook
    • Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
    • Cold temperature cure
    • Fast cure and walk on time
    • Excellent barrier properties, low permeability
    • Single-coat application 60 to 125 mils
    • Bridges normal shrinkage cracks in concrete
    • True monolithic film on steel and concrete
    • Encapsulates rivets, bolts, and edges in one coat
    • Outstanding abrasion, impact and tear resistance
    • Combines polyurethane and polyurea technologies to form a hybrid polyurethane

    Description:

    Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.


  • Reactamine 760 HB

    Features:

    • High film build (200 mil plus) in one coat
    • Complies to Greenbook
    • UL approved for potable water*
    • Cold temperature cure
    • Fast cure and walk on time
    • Excellent barrier properties, low permeability
    • Can be used to resurface highly deteriorated concrete
    • Bridges normal shrinkage cracks in concrete
    • True monolithic film on steel and concrete
    • Encapsulates rivets, bolts, and edges in one coat
    • Outstanding abrasion, impact and tear resistance
    • Combines polyurethane and polyurea technologies to form a hybrid polyurethane

    Description:

    Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service. Ultra high build product designed to be applied at high thickness in one coat application.


  • Reactamine 760 HC

    Features:

    • Flexible, elastomeric formulation
    • Fast cure and walk on time
    • Does not require force cure
    • Excellent barrier properties, low permeability
    • Single-coat application 10 to 30 mils
    • Eliminates cracking due to flex and strain
    • Outstanding abrasion, impact and tear resistance
    • Readily removed when required.
    • Complies with 21 CFR 175.300 Methods D, E and G for direct dry food contact

    Description:

    Reactamine 760 HC is an environmentally friendly, advanced hybrid technology, plural-component lining for hopper cars and other services requiring abrasion and crack resistance.


  • Reactamine ET

    Features:

    • Tough abrasion and impact resistant film
    • High tensile strength and tear resistance
    • Excellent water and waste water resistance
    • Moisture tolerance; during and after cure
    • Low odor; zero VOC
    • Can be applied from 20 °F to 150 °F (-6 °C to 65 °C)
    • Extremely fast cure times (dries to the touch in 10 seconds)
    • Service temperature (dry) of -40 °F to 250 °F (-4 °C to 121 °C)
    • Single coat application (=250 mils)
    • Applies using a heated, plural component spray system
    • Complies with FDA 21CFR 175.300 criteria for dry food contact

    Description:

    Reactamine ET is an extra tough, abrasion resistant elastomer coating with extremely fast cure times that is ideal for concrete substrates. It possesses exceptional toughness for numerous industrial applications that include linings for wastewater applications, secondary containment, sewer lines, manhole restoration, rail cars, wastewater lagoon linings, and other applications needing a tough resilient coating. It is extremely resistant to high abrasion and impact with elongation properties to tolerate movement over concrete substrates.


  • Reactamine Joint Seal

    Features:

    • 100% solids; zero VOC
    • Fast cure times
    • USDA compliant for non-direct food contact
    • Has a functional temperature range of 0° to 250°F (-18°C to 121°C)
    • Excellent water resistance, chemical resistance, and thermal stability at high & low temperatures
    • Works well with asphalt or concrete

    Description:

    Reactamine Joint Seal is a 2-component 100% solids, polyurea-based joint sealant that is self-leveling and cures in approximately 60 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and breakdown. This product can be applied at temperatures ranging from 0° to 150°F (-18° to 65°C) and possess excellent chemical resistance, water resistance and thermal stability at both high and low temperatures.


  • Reactamine Joint Seal FC

    Features:

    • 100% solids; zero VOC
    • Fast cure times
    • USDA compliant for non-direct food contact
    • Has a functional temperature range of 0° to 250°F (-18°C to 121°C)
    • Excellent water resistance, chemical resistance, and thermal stability at high & low temperatures
    • Works well with asphalt or concrete

    Description:

    Reactamine Joint Seal FC is a 2-component 100% solids, polyurea-based joint sealant that is self-leveling and cures in approximately 30 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and breakdown. This product can be applied at temperatures ranging from 0° to 150°F (-18° to 65°C) and possess excellent chemical resistance, water resistance and thermal stability at both high and low temperatures.


  • Reactamine MP

    Features:

    • Tough abrasion and impact resistant film
    • High tensile strength and tear resistance
    • 400% elongation provides excellent flexibility on concrete substrates
    • High tolerance to relative humidity levels
    • Low odor; zero VOC
    • Can be applied from 20 °F to 150 °F (-29 °C to 65 °C)
    • Extremely fast cure times (tack-free in under 20 seconds)
    • Service temperature (dry) of -40°F to 250°F (-40°C to 120°C)

    Description:

    Reactamine MP is a general and multi-purpose, abrasion resistant elastomer coating with extremely fast cure times that is well-suited for a variety of applications. It possesses exceptional toughness for numerous industrial uses such as petrochemical refinery containments, water & wastewater substrates, and marine structures, among many others. Its excellent elongation properties are ideal for tolerating movement over concrete surfaces.


  • Reducer 94

    Features:

    Description:


  • Rustbond

    Features:

    • Universal primer and tie-coat
    • Excellent adhesion to SSPC-SP 2 prepared steel, galvanizing, aluminum, stainless steel and copper
    • Low stress, highly flexible film
    • Extremely high solids
    • Low odor
    • Contains corrosion inhibitors
    • Compatible with a variety of topcoats
    • User friendly brush and roller application
    • VOC compliant to current AIM regulations

    Description:

    Rustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and accept a variety of topcoats. Recommended use as primer/sealers for marginally prepared steel and over old coatings. Its excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats. Its thixotropic character reduces run off, ensuring that the edges of existing coatings are encapsulated thus reducing undercutting and peeling. It may also be used as a tie-coat for coatings that exceed their “recoat window.” Consult Carboline Technical Services Department for specific recommendations.


  • Rustbond PS

    Features:

    • Excellent wicking characteristics resulting in very good adhesion to a variety of substrates
    • Low stress during application and cure, can be applied over aged coatings and tight rust
    • Universal primer and tie-coat
    • Very low VOC, less than 100 g/l, and low odor for compliance in many stringent locations
    • Low temperature cure with Additive 8505 to extend the painting season
    • Good pot life in hotter weather without Additive 8505, one Rustbond PS for year-round application
    • User-friendly application with brush, roller, and spray
    • Tolerates higher dry film thickness (DFT) range, easier to apply
    • Excellent sealer for metalizing and thermal sprayed aluminum (TSA)

    Description:

    Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimizing surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher temperatures to help minimize waste and also cures at low temperatures down to 35°F (1.7°C) with Additive 8505 so you have one Rustbond product for year-round application.


  • Sanitile 100

    Features:

    • Heavy duty acrylic block filler
    • High solids with excellent filling properties
    • Dry heat resistance to 200 °F
    • Wet heat resistance to 120 °F
    • Block filler for acrylics, epoxies, and polyesters
    • Single component
    • Low odor; SCAQMD compliant (<100 g/l VOC)
    • Suitable for use in USDA inspected facilities
    • Applicable for LEED projects as a block filler (not considered a thin-film paint)

    Description:

    Specialized high solids filler used for sealing/filling masonry surfaces subject to both aggressive and mild environments. Unique formulation allows for topcoating with conventional or high-performance finishes. May be used as a block filler where LEED-compliant flat or non-flat primers or finishes are required.


  • Sanitile 120

    Features:

    • Excellent primer/sealer for drywall
    • Glue-like bond to almost any surface
    • Outstanding tie-coat over existing coatings
    • Single component, thin-film application
    • Topcoat with virtually any generic coating
    • Ready-to-apply as supplied
    • Fast drying
    • Low odor; low VOC
    • Suitable for use in USDA inspected facilities

    Description:

    Universal bonding primer that adheres tenaciously to virtually any surface including galvanized and stainless steel, aluminum, PVC, FRP and ceramic tile. It can also be used on porous and high PH substrates (up to 12.5) like concrete and cementitious patching compounds.


  • Sanitile 155

    Features:

    • Single component
    • Excellent brush, roll or spray
    • Low odor, low VOC
    • Excellent color and gloss retention
    • Rapid tint color service
    • Suitable for use in USDA inspected facilities

    Description:

    Waterborne acrylic finish used for the protection of drywall and masonry surfaces in light to medium duty service. Excellent application characteristics, low odor, and low VOC. Satin finish provides a pleasing and easily cleanable finish. May also be used for exterior exposed areas due to its weatherability.


  • Sanitile 255

    Features:

    • High-performance WB epoxy acrylic finish
    • Good chemical resistance
    • Resists repeated cleaning
    • Tile-like finish for ease of cleaning
    • Low odor, low VOC
    • Fast dry to touch and recoat
    • Yellowing resistant finish
    • Suitable for use in USDA inspected facilities

    Description:

    A water-based epoxy acrylic finish that is easy to apply, has an attractive gloss appearance, and has good chemical resistance. It is used primarily in more light to moderate exposures on walls and structural components.


  • Sanitile 500

    Features:

    • Low odor
    • Fast drying
    • Very low VOC
    • Excellent moisture resistance
    • Excellent application properties
    • No fire hazard

    Description:

    A heavy-duty, two-component, water-based, epoxy block filler/sealer that is designed to fill and seal concrete masonry units and other concrete surfaces. It provides a stronger base-coat than standard acrylic block fillers for those projects requiring more physical and chemical resistant properties.


  • Sanitile 555 VOC

    Features:

    • Very good chemical resistance
    • Resists repeated cleaning
    • Gloss finish for ease of cleaning
    • Low odor, VOC is <100 g/L
    • Fast dry to touch and recoat
    • Hard, tough, abrasion resistant film
    • Suitable for use in USDA inspected facilities
    • Breathable for concrete with high moisture vapor transmission, when used as part of an all waterbased system

    Description:

    A water-based epoxy finish that is easy to apply and has very good chemical resistance. Sanitile 555 VOC has minimal odor and is less than 100 g/L VOC. It has significant improvements in film hardness and toughness over straight acrylic or acrylic-epoxy coatings and is more chemically and physically resistant. It is therefore ideal for more aggressive exposures on walls and structural components than acrylic-modified epoxies. It may also be used for light to moderate duty floors.


  • Sanitile 600

    Features:

    • Very good abrasion resistance
    • Very good flexibility and impact resistance
    • Recommended for concrete or other surfaces
    • Excellent for filling and sealing concrete and concrete masonry units
    • Suitable for use in USDA inspected facilities

    Description:

    A high build epoxy coating for sealing and filling porous and irregular cementitious surfaces. Particularly recommended for walls in critical areas of institutional, pharmaceutical, and food processing plants where concrete surfaces must be prepared for ease of cleaning and surface decontamination. It is recommended as a primer on concrete under Sanitile and other Carboline topcoats. Not recommended for immersion service without recommended topcoats.


  • Sanitile 755 FR

    Features:

    • Durable epoxy wall cladding
    • High fiber content / integrated fiber system offers better distribution and strength
    • Ultra low VOC, low odor system
    • Passed fungal testing per ASTM G21, ASTM D5590
    • Labor saving, one coat reinforced system - no need for fiberglass matting
    • High tensile strength and impact resistance
    • Excellent chemical resistance
    • Excellent abrasion and moisture resistance
    • Self-priming and primer/finish capabilities
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities

    Description:

    Sanitile 755 FR is a reinforced epoxy designed for maximum protection of walls in high impact zones like schools and hospitals, while its exceptional thermal shock resistance protects against aggressive wash downs and chemical cleanings in Food and Beverage facilities. It has outstanding wetting properties that permit its application direct to drywall, CMU, concrete or steel surfaces.


  • Sanitile 845

    Features:

    • Extremely low out-gassing properties for clean room applications
    • Excellent physical properties and chemical resistance
    • High build
    • High solids formulation allows for improved edge protection
    • VOC compliant to 100 g/l VOC regulations

    Description:

    High solids, high build, satin finish that was specifically designed to have very low out-gassing properties making it ideal for clean room applications. It provides a tough attractive finish while exhibiting outstanding performance properties. Demonstrates extremely good resistance to abrasion, corrosion and chemical exposure when applied over recommended Carboline primers and/or intermediate coats.


  • Sanitile 855

    Features:

    • Versatile multi-purpose coating
    • Tough, high gloss finish
    • Excellent application properties
    • VOC-compliant for most areas
    • Tough, chemical resistant film
    • Excellent color stability
    • Suitable for use in USDA inspected facilities

    Description:

    A high performance finish that provides a durable, impermeable, and easily sanitized surface. This polyester- polyurethane is fortified for film toughness, quick-dry properties, and outstanding color stability. Used to provide the best overall protection for a combination of aggressive chemicals/ cleaning, abrasion and impact resistance, and color stability.


  • Scratch-Coat 300

    Features:

    • Contributes toward satisfying credit for low emitting material under LEED 4.1
    • Meets SCAQMD Rule 1113 for VOC content
    • Vertical and overhead applications
    • Low odor
    • Meets all VOC requirements

    Description:

    An epoxy based patching compound for filling surface defects and bugholes in concrete substrates. This product uses an epoxy resin and a unique, inert mineral filler to achieve a smooth non-slumping fill material. The system is formulated to improve the integrity and continuity of a prepared substrate, prior to the application of a coating or lining system.


  • Scratch-Coat 800

    Features:

    • Vertical and overhead applications
    • Sandable
    • Easy application and workability
    • Meets most VOC requirements

    Description:

    A vinyl ester based patching compound for filling surface defects and bugholes in concrete substrates. This product uses an epoxy resin and a unique, inert mineral filler to achieve a smooth non-slumping fill material. The system is formulated to improve the integrity and continuity of a prepared substrate, prior to the application of a coating or lining system.


  • Sealer 200WB Pigmented Gloss

    Features:

    • Field and shop application
    • Soap & water clean up
    • Low odor, low VOC’s
    • Excellent adhesion
    • Excellent chemical & abrasion resistance
    • Also available in satin

    Description:

    A two component waterborne urethane coating that offers the abrasion resistance and toughness inherent of urethanes. It also provides excellent resistance to UV discoloration, impact and staining with easy soap and water cleanup.


  • Sealer 30SD

    Features:

    • Contributes toward satisfying credit for low emitting material under LEED 4.1
    • Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017 Compliance Certificates Available Upon Request
    • Permanent ESD Stability
    • Meets SCAQMD Rule 1113 for VOC content
    • High Solids
    • Excellent Color Stability
    • Good Stain Resistance
    • VOC Compliant

    Description:

    A two-component, ASTM Type V, aliphatic polyurethane coating. Sealer 30SD offers the outstanding color stability, resistance to UV degradation, and electrostatic dissipative capability. Toughness, impact resistance, and stain resistance are inherent qualities of this topcoat.


  • Sealer 35

    Features:

    • High Solids
    • Excellent Color Stability
    • Good Stain Resistance
    • VOC Compliant
    • Low Odor
    • High Wear Filler may be incorporated for increased abrasion resistance

    Description:

    A multi-component, aliphatic polyurethane coating. Sealer 35 offers the outstanding color stability and resistance to UV degradation known industry wide to be inherent of aliphatic urethane chemistry. Toughness, impact resistance, and stain resistance are inherent qualities of this topcoat.


  • Sealer 80

    Features:

    • Isocyanate free
    • Fast cure
    • Excellent durability
    • Low Dirt Pickup
    • Meets IEEE ANSI C57.12.29-2005 Standard For Pad Mounted Equipment

    Description:

    Sealer 80 is an isocyanate free, ultra-durable, fast-cure coating that provides outstanding color and gloss retention. It combines the chemical resistant properties of epoxies with the weathering characteristics of acrylic-polyurethanes giving it a tightly cross-linked film resulting in a finish with outstanding barrier properties against Vaporized Hydrogen Peroxide. This product meets the most stringent VOC regulations for field applied coatings of less than 100 g/L volatile organic content.


  • Sealer 985 (fka Carboseal 985)

    Features:

    • Quick return to service (2-4 hours for foot traffic)
    • Self-leveling
    • Smooth, gloss finish
    • Flexible with high impact resistance
    • Excellent UV protection
    • Excellent chemical and abrasion resistance
    • Extended pot-life or working time
    • 95% volume solids, low VOC, low odor
    • Suitable for use in USDA inspected facilities
    • Available in custom colors
    • Class A fire rating per ASTM E84

    Description:

    This high-solids, polyaspartic was developed with excellent chemical resistance, adhesion, and resistance to UV degradation for floor coating applications. it is very low VOC and virtually odor free.


  • Sealer 985 HB

    Features:

    • Quick return to service (2-4 hours for foot traffic)
    • Smooth, gloss finish
    • Flexible with high impact resistance
    • Excellent UV protection
    • Excellent chemical and abrasion resistance
    • Extended pot-life or working time
    • Low VOC, low odor
    • Suitable for use in USDA inspected facilities

    Description:

    This product is a high-solids, high-build polyaspartic developed for applications requiring a heavier bodied product. Its characteristics include excellent chemical resistance, adhesion, and resistance to UV degradation. It is low VOC product and is virtually odor free.


  • Semstone 110

    Features:

    • Outstanding wetting properties
    • Solvent-free
    • Long working time
    • Excellent adhesion
    • Compatible with a variety of toppings

    Description:

    Two part epoxy exhibiting superior adhesion to concrete and steel. Used primarily as a primer/sealer for concrete surfaces and top coated with a variety of chemically resistant toppings.


  • Semstone 140

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding properties
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    High performance lining system designed for concrete. Semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals.


  • Semstone 140 CT

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    Semstone 140 CT is a 100% solids, high performance, epoxy lining system designed for concrete. It is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 140 CT is specially formulated to withstand some of industry’s most aggressive chemicals.


  • Semstone 145

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior acid resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating and may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.


  • Semstone 145 CT

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor
    • Formulated to resist a variety of chemical solutions.
    • Suitable for use in USDA-inspected facilities

    Description:

    Semstone 145 CT is a 100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 145 CT is specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.


  • Semstone 245

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor
    • Formulated to resist a variety of chemical solutions.

    Description:

    Semstone 245 is a 100% solids, high performance, novolac epoxy lining system designed for concrete. Semstone 245 is a semileveling coating, it may be applied as an aggregate filled and/or reinforced coating system. Semstone 245 is specially formulated to withstand some of the industry's most aggressive chemicals, including chlorinated solvents.


  • Semstone 305

    Features:

    • Easy to apply
    • Nonflammable
    • Low odor
    • Castable
    • Make excellent materials of construction

    Description:

    Semstone 305 polymer concrete is an excellent alternatives to acid brick. It is used to protect Portland cement concrete from attack from a wide range of aggressive chemicals. Semstone 305 polymer concrete can be applied from 1/2” (12.7 mm) to several inches thick. Applied by screed and trowel method, their installation is quick and easy. Semstone 305 provides a monolithic surfacing that has excellent resistance to impact and mechanical abuse and can be used to restore and protect degraded surfaces in a single application.


  • Semstone 6325 Sealant

    Features:

    • Long term abrasion and chemical resistance
    • Excellent bond strength assures good adhesion
    • Pourable viscosity allows easy installation to horizontal surfaces
    • Retains physical properties over a wide temperature range, -20 to 150°F (-29 to 66°C)
    • Factory proportioned packaging ensures consistent high quality and simplified mixing
    • Compatible with all Carboline lining systems

    Description:

    Two-component, self-leveling, polyurethane sealant. It exhibits excellent flexibility with moderate hardness and good chemical resistance to organic acids, alkalis and most solvents. Uses: can be used in conjunction with all lining systems in a wide range of applications. All high movement joints: isolation, expansion or control Thermal shock situations Exterior applications


  • Semstone 805

    Features:

    • Highly Flexible
    • Chemical Resistant
    • Water Resistant
    • Abrasion Resistant
    • 100% Solids

    Description:

    Semstone 805 is a flexible epoxy polymer coating and lining providing a chemical, water and abrasion resistant barrier for steel and concrete. This versatile coating system was developed as a self-leveling, flexible chemical resistant coating and lining and can also be used as a high build coating and lining system with the addition of a third component. Semstone 805 is a 100% solids, low odor, two-component system applied either as a neat system (unfilled), a reinforced system, an aggregate-filled system or as an aggregate filled reinforced system. A bagged Part C thixotropic agent is added for high build applications. It is most often used with reinforcing fabric (#100) over expansion joints.


  • Semstone 806

    Features:

    • Flexible
    • Abrasion Resistant
    • Chemical Resistant
    • Waterproof

    Description:

    Semstone 806 is a 100% solids, low odor, rubberized epoxy. It is used as a chemically resistant membrane for concrete. When reinforced with our flexible fabrics it provides a system which will bridge working cracks as well as expansion joints. When reinforced with Semstone 100 fabric, it can bridge crack expansion joint movement up to 1/2” without cracking. This product is a self-leveling material. However, it maybe used as a high build coating system by the addition of a third component, Semstone Thixotrope D, which is a non-silica Thixotrope. When using reinforcing fabric, Thixotrope D is not required. Concrete slabs with severe cracking problems, as well as all construction and expansion joints, may be treated using Semstone 806 with #100 Fabric. This ideal ideal for use as a secondary containment membrane.


  • Semstone 870

    Features:

    • Excellent resistance to chemical attack
    • Built from flexible vinyl ester binders
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    Semstone 870 is a high performance, vinyl ester lining system designed for concrete. Semstone 870 is formulated to be more flexible than typical vinyl esters to tolerate more concrete movement. It is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 870 is specially formulated to withstand some of industry’s most aggressive chemicals, including a broad range of organic chemicals.


  • Semstone 884

    Features:

    • Excellent alternative to acid brick

    Description:

    Semstone 884 is a vinyl ester polymer concrete which incorporates proprietary non-shrink technology into its formulation, making it the first practical vinyl ester polymer concrete for use as a concrete topping. It is recommended for use in concentrated nitric acid service and other strong oxidizers. Semstone 884 is an excellent alternative to acid brick. It is also used as a construction material for pouring pump foundations and small tank foundations. It can be used for pre-casting of sumps and trenches.


  • Semstone Fabric 100

    Features:

    Description:

    Semstone Fabric 100 is a non-woven geotextile made from polypropylene fibers. The polypropylene fibers are essentially chemically and biologically inert which offers good chemical resistance to acids, alkalis, oils and most solvents. When saturated with either SEMSTONE 805 or SEMSTONE 806 the result is a chemically resistant, flexible, reinforced membrane system well suited for sealing expansion joints or bridging working cracks in concrete.


  • Semstone Scrim Cloth

    Features:

    Description:

    Scrim Cloth is a woven, Type “E”, borosilicate glass fiber reinforcing fabric, specially designed for Semstone Systems. The glass filament fibers are bundled and woven at right angles to each other, which affords bidirectional strength. When Scrim Cloth is incorporated in a Semstone Epoxy, Novolac or Vinyl Ester coating/lining system, impact resistance, tensile strength and fatigue resistance of the system is increased.


  • Semstone Thixotrope C

    Features:

    Description:

    Cellulose powder (crushed newspaper) for adding body to Semstone products


  • Semstone Thixotrope D

    Features:

    Description:

    Cabosil for film build properties for Semstone products


  • Shock-Crete HD

    Features:

    • Unaffected by MVT (moisture vapor transmission)
    • Excellent chemical resistance
    • High abrasion resistance
    • Resistant to thermal shock
    • Withstands mechanical stress
    • Easy to clean and sterilize surface
    • Resistant to steam cleaning
    • Positive slip resistance
    • May be applied to "green" concrete
    • Ultra low VOC/odor
    • Suitable for use in USDA inspected facilities
    • Resistant to liquid nitrogen (Contact Dudick for recommendations when dealing with liquid nitrogen exposure)

    Description:

    Liquid nitrogen resistant, trowel applied cementitious urethane mortar (1/4"-3/8" / 6-10 mm). Contains antimicrobial additives that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.


  • Shock-Crete HF

    Features:

    • Unaffected by MVT (moisture vapor transmission)
    • Excellent chemical resistance
    • High abrasion resistance
    • Resistant to thermal shock
    • Withstands mechanical stress
    • Easy to clean and sterilize surface
    • Resistant to steam cleaning
    • Positive slip resistance
    • May be applied to "green" concrete
    • Ultra low VOC/odor
    • Suitable for use in USDA inspected facilities

    Description:

    Highly functional trowel applied cementitious urethane mortar (1/4"-3/8" / 6-10 mm) that allows moisture to move through the material at a safe rate and offers significant lifecycle cost savings compared to tile or acid brick. It contains Polygiene® which has antimicrobial properties that protect it, and the facility it is installed in, from degradation caused by microorganisms. It provides protection from thermal shock at up to 250°F, mechanical damage, and chemical attack.


  • Shock-Crete IF

    Features:

    • Iron filled for ultra durability
    • Unaffected by MVT (moisture vapor transmission)
    • High abrasion resistance
    • Resistant to thermal shock
    • Withstands high mechanical stress
    • Capable of withstanding stress from heavy machinery
    • Easy to clean and sterilize surface
    • Resistant to steam cleaning
    • Positive slip resistance
    • May be applied to "green" concrete
    • Ultra low VOC/odor
    • Suitable for use in USDA facilities

    Description:

    Exceptionally heavy duty, trowel applied cementitious urethane mortar (3/8"-1/2" / 10-13 mm). Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to mechanical damage, heavy machinery, thermal shock, and chemical attack.


  • Shock-Crete MD

    Features:

    • Contributes toward satisfying credit for low emitting material under LEED 4.1
    • Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance Certificates Available Upon Request
    • Meets SCAQMD Rule 1113 for VOC content
    • Thermal Shock Resistant
    • Excellent Chemical Resistance
    • Low Odor
    • Fast Setting
    • Low Temperature Cure
    • FDA and USDA Compliant
    • Resistant to Steam Cleaning
    • Anti-Microbial Agents are available as an option
    • Anti-Skid Version Available
    • Coefficient of Thermal Expansion similar to concrete
    • VOC Compliant

    Description:

    An aggregate filled system that develops a cure strength approximately 2 times that of the concrete base to which it is applied. The monolithic topping exhibits excellent physical and mechanical strength and chemical resistance.


  • Shock-Crete SL2

    Features:

    • Resistant up to 12 lbs of moisture vapor transmission per 1000 sq ft/ 24hrs
    • Excellent chemical resistance
    • High abrasion resistance
    • Resistant to thermal shock
    • Withstands mechanical stress
    • Easy to clean and sterilize surface
    • Resistant to steam cleaning
    • Positive slip resistance
    • May be applied to "green" concrete
    • Ultra low VOC/odor
    • Suitable for use in USDA inspected facilities
    • Can be use in decorative flake or quartz systems

    Description:

    Self-leveling cementitious urethane flooring product (1/8-3/16″ / 3-5 mm). that allows moisture to move through the material at a safe rate and offers significant lifecycle cost savings compared to tile or acid brick. It contains Polygiene® which has antimicrobial properties that protect it, and the facility it is installed in, from degradation caused by microorganisms. It is a great solution for moderate thermal shock, mechanical damage, and chemical attack.


  • Shock-Crete SR

    Features:

    • Unaffected by MVT (moisture vapor transmisson)
    • Excellent chemical resistance
    • High abrasion resistance
    • Resistant to thermal shock
    • Withstands higher mechanical stress
    • Easy to clean and sterilize surface
    • Resistant to steam cleaning
    • Positive slip resistance
    • May be applied to "green" concrete
    • Ultra low VOC/odor
    • Suitable for use in USDA inspected facilities

    Description:

    Semi-self-leveling, functional cementitious urethane flooring product (3/16-1/4” / 5-6 mm) that allows moisture to move through the material at a safe rate and offers significant lifecycle cost savings compared to tile or acid brick. It contains Polygiene® which has antimicrobial properties that protect it, and the facility it is installed in, from degradation caused by microorganisms. It provides protection from thermal shock at up to 210°F, mechanical damage, and chemical attack.


  • Shock-Crete TCUV

    Features:

    • UV stable
    • Excellent chemical resistance
    • High abrasion resistance
    • Resistant to thermal shock
    • Excellent resistance to MVT (moisture vapor transmission)
    • Withstands mechanical stress
    • Ultra low VOC
    • Suitable for use in USDA inspected facilities.

    Description:

    Shock-Crete TCUV is a high performance, UV stable, semi-gloss topcoat for cementitious urethane floor systems. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms.


  • Shock-Crete Topcoat

    Features:

    • Excellent chemical resistance
    • High abrasion resistance
    • Resistant to thermal shock
    • Excellent resistance to MVT (moisture vapor transmission)
    • Easy to clean and sterilize
    • Resistant to steam cleaning
    • Withstands high mechanical stress
    • Ultra low VOC/odor
    • Suitable for use in USDA inspected facilities

    Description:

    Polyurethane coating used as a topcoat for cementitious urethane flooring systems. Excellent primer for cementitious urethane systems due to outstanding resistance to moisture vapor transmission. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms.


  • Shock-Crete Vertical

    Features:

    • Excellent chemical resistance
    • Withstands high mechanical stress
    • High abrasion resistance
    • Easy to clean and sterilize surface
    • Resistant to thermal shock
    • Resistant to steam cleaning
    • Ultra low VOC/odor
    • Suitable for use in USDA inspected facilities

    Description:

    Cementitious cove base mortar that provides a durable finish for use with Shock-Crete flooring systems. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.


  • Solvent 100

    Features:

    Description:


  • SOUTHWEST TYPE 5AR

    Features:

    • Extended set time - up to 4 days
    • Labor and material savings
    • Reduced clean up and start up times
    • Increased production
    • Accelerator A-20 injection is required for final set
    • Styrene free - no toxic decomposition gases
    • Economical - maintains project on budget
    • Multiple UL Designs - can be used with all Southwest Type 5GP and Southwest Type 5MD designs

    Description:

    This is an extended set, spray applied fire resistive material that can be left in the equipment and lines for up to 4 days without setting. It was developed to be used as a holding material to leave in the equipment and lines to reduce start up and clean up times when using the Southwest Type 5 materials. This material requires injection with Accelerator A-20 to reach final set. It is intended for use with Southwest Type 5GP and Southwest Type 5MD for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units.


  • SOUTHWEST TYPE 5GP

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – compliant with EPA and OSHA
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases
    • Economical – Maintains project on budget
    • Design flexibility with over 100 UL/cUL designs

    Description:

    A 15 lb./ft³ (240 kg/m³) SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5GP is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 5MD

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – compliant with EPA and OSHA
    • Mineral Wool free – no airborne fibers
    • Styrene free – no toxic decomposition gases
    • Design flexibility with over 100 UL/cUL designs

    Description:

    A medium density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5MD is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 7GP

    Features:

    • Damage resistant and permanent
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set (optional)
    • Moisture resistant
    • Asbestos-free – complies with EPA and OSHA regulations
    • Mineral Wool free – no airborne fibers
    • Styrene free – no toxic decomposition gases
    • Economical – Maintains project on budget
    • Design flexibility with over 100 UL/cUL designs

    Description:

    A 22 lb./ft³ (352 kg/m³) density (average) SFRM intended for the fire protection of structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. It was specifically formulated for either unconditioned or conditioned areas such as mechanical rooms, elevator shafts and parking garages.


  • SOUTHWEST TYPE 7HD

    Features:

    • Damage resistant and permanent
    • Noncombustible
    • Moisture resistant
    • Asbestos-free – complies with EPA and OSHA regulations
    • Mineral Wool free – no airborne fibers
    • Styrene free – no toxic decomposition gases
    • Economical – Maintains project on budget
    • Design flexibility with over 100 UL/cUL designs

    Description:

    A 40 lb./ft³ (640 kg/m³) density (average) SFRM intended for the fire protection of structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. It was specifically formulated for high humidity areas such as mechanical rooms, elevator shafts and parking garages and is resistant to damage and moisture. Southwest Type 7HD is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 7TB

    Features:

    • 15 minute thermal barrier protection
    • Damage resistant and permanent
    • Noncombustible
    • High build
    • Moisture resistant
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.
    • Economical – Maintains project on budget.

    Description:

    A 22 lb./ft³ (352 kg/m³) density (average) SFRM designed for use as a thermal barrier fire protection material over foam plastics. A secondary use is for fire protection of steel. It was specifically formulated to resist exposure to high humidity and moisture and for direct application to rigid foam plastic urethane, and polystyrene insulation.


  • SOUTHWEST TYPE DK3

    Features:

    • Excellent bonding properties
    • Fast overcoat time
    • Noncombustible
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.

    Description:

    A cement and vermiculite based, spray applied spatter coat designed to be used in conjunction with Southwest fireproofing materials to enhance bonding properties on cellular steel decking and roof deck systems.


  • SP-100 Equipment Wash

    Features:

    • Spray machine cleaner

    Description:

    Spray machine cleaner


  • SP-1264

    Features:

    • 100% Solids
    • Excellent wetting properties
    • Superior penetration and adhesion properties creating a stronger bond between the topcoat and the concrete substrate
    • Resistance to stress cracking
    • User friendly
    • Easily applied by brush, roller and spray

    Description:

    A two-component, 100% solids epoxy sealer designed for use on damp concrete. This product has excellent adhesion to cold and damp concrete. This product has exceptional sealing capability that easily penetrates pores and tiny cracks in concrete and masonry surfaces.


  • SP-1288 GP Brush

    Features:

    • Excellent resistance to cathodic disbonding up to 65°C (149°F) with SSPC SP-11 Surface Preparation.
    • Excellent adhesion to SSPC SP-11 prepared steel surfaces, Fusion Bond Epoxy (FBE), and Fiber Reinforced Plastic (FRP).
    • 100% solids
    • Excellent impact resistance
    • Good Flexibility
    • High build single coat application up to 40 mil
    • Easily applied by spray, brush or roller

    Description:

    A two-component ambient cured epoxy based on novel leading edge technology. This product can be used in applications where abrasive blasting is not possible or feasible. It exhibits excellent adhesion on metal substrates prepared as per SSPC SP-11 Surface Preparation Standard.


  • SP-1288 GP Spray

    Features:

    • Excellent resistance to cathodic disbonding up to 65°C (149°F) with SSPC SP-11 Surface Preparation.
    • Excellent adhesion to SSPC SP-11 prepared steel surfaces, Fusion Bond Epoxy (FBE), and Fiber Reinforced Plastic (FRP).
    • 100% solids
    • Excellent impact resistance
    • Good Flexibility
    • High build single coat application up to 40 mil
    • Easily applied by spray, brush or roller

    Description:

    A two-component ambient cured epoxy based on novel leading edge technology. This product can be used in applications where abrasive blasting is not possible or feasible. It exhibits excellent adhesion on metal substrates prepared as per SSPC SP-11 Surface Preparation Standard.


  • SP-1386 Brush

    Features:

    • Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE)
    • 100% solids
    • Excellent fresh water and salt water resistance
    • Good flexibility with >50% elongation
    • Good acid and abrasion resistance
    • High build one-coat application
    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600

    Description:

    A hybrid two-component, elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. Available in Spray Grade and Brush Grade. This product meets the AWWA C222 requirements.


  • SP-1386 Spray

    Features:

    • Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE)
    • 100% solids
    • Excellent fresh water and salt water resistance
    • Good flexibility with >50% elongation
    • Good acid and abrasion resistance
    • High build one-coat application
    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600

    Description:

    A hybrid two-component, elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. Available in Spray Grade and Brush Grade. This product meets the AWWA C222 requirements.


  • SP-1864

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 65˚C (149˚F)
    • Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and concrete
    • High build one-coat application
    • 100% solids – Does not contain coal tar
    • Excellent fresh and salt water, impact and abrasion resistance

    Description:

    A “coal tar free”, high performance two-component polyurethane coating engineered for applications in Marine, Industrial and Pipeline industries. This low friction, high abrasion and impact resistant coating is used on exterior hulls to reduce ad-freezing of ships provide abrasion and corrosion protection. Further, it is used to coat marine pilings and docks where impact and abrasion resistance is required and cathodic protection is utilized. Available in Spray Grade and Brush Grade.


  • SP-1890 Brush

    Features:

    • Provides outstanding adhesion to properly prepared Polyolefin (PE) surfaces and liquid epoxy field joint coatings.
    • 100% Solids

    Description:

    A two-component 100% solids modified epoxy polymer designed to provide superior adhesion between three-layer (“3L”) Polyolefin (“PE”) and liquid epoxy joint coatings.


  • SP-2810

    Features:

    • 100% Solids
    • High build single coat application
    • May be applied down to -18°C (0°F)
    • Isocyanate free
    • Excellent cathodic disbonding performance at temperatures up to 65°C (149°F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE) or Fiber Reinforced Plastic (FRP)

    Description:

    A two-component modified epoxy coating designed for use in winter application on cold substrates. This product has the ability to cure down to -10°C (14°F). It is used for applications in cold weather (winter) where other coating systems would require preheating of the substrate or enclosure and application of external heat for curing purposes. It is ideal for utilization on facilities operating at low temperatures, which precludes the use of preheating / external heat.


  • SP-2831 Brush

    Features:

    • 100% solids
    • Excellent cathodic disbonding performance at temperatures up to 65˚C (149˚F)
    • Single coat application
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE) or Fiber Reinforced Plastic (FRP)
    • Isocyanate free

    Description:

    A solvent free, 100% solids, two-component epoxy coating that has the ability to cure down to 0˚C (32˚F). Used for application in cool weather (fall/winter) where other coating systems would require preheating of the substrate or enclosure and application of external heat for curing purpose. It is ideal for utilization on facilities operating at low temperatures, which precludes the use of preheating/ external heat. Available in both Spray Grade and Brush Grade.


  • SP-2831 Spray

    Features:

    • 100% solids
    • Excellent cathodic disbonding performance at temperatures up to 65˚C (149˚F)
    • Single coat application
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE) or Fiber Reinforced Plastic (FRP)
    • Isocyanate free

    Description:

    A solvent free, 100% solids, two-component epoxy coating that has the ability to cure down to 0˚C (32˚F). Used for application in cool weather (fall/winter) where other coating systems would require preheating of the substrate or enclosure and application of external heat for curing purpose. It is ideal for utilization on facilities operating at low temperatures, which precludes the use of preheating/ external heat. Available in both Spray Grade and Brush Grade.


  • SP-2832

    Features:

    • Excellent resistance to cathodic disbondment up to 65˚C (149˚F)
    • Excellent adhesion to grit blasted steel surfaces, fusion bond epoxy, liquid epoxy, and urethane coatings
    • 100% Solids
    • High build one-coat application
    • Standard high-pressure airless application

    Description:

    A 100% solids technologically advanced epoxy coating designed for general purpose corrosion protection in the Oil and Gas Industry. This product can be applied through standard high-pressure airless spray equipment. It has superior anti-corrosive properties on the exterior of steel pipelines for above and below ground service.


  • SP-2881

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion protection for structures in marine and chemical environments
    • Excellent corrosion resistance to sea and fresh water immersion
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2881 is used primarily for the corrosion protection of buried pipes and tanks.


  • SP-2882

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion resistance to marine and chemical environments
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2882 is used primarily for the corrosion protection of buried pipes and tanks.


  • SP-2884

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion resistance to marine and chemical environments
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2884 is used primarily for the corrosion protection of buried pipes and tanks. It is designed for brush and roll use only.


  • SP-2888 RG Brush

    Features:

    • Excellent resistance to cathodic disbonding up to 85˚C (185˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat application >50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    SP-2888® RG is an epoxy/polyurethane Hybrid coating based on “State of the Art” epoxy/urethane chemistry. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. SP-2888® RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion.


  • SP-2888 RG Cartridge

    Features:

    • Excellent resistance to cathodic disbonding up to 85˚C (185˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat application >50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    SP-2888® RG is an epoxy/polyurethane Hybrid coating based on “State of the Art” epoxy/urethane chemistry. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. SP-2888® RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion.


  • SP-2888 RG Spray

    Features:

    • Excellent resistance to cathodic disbonding up to 85˚C (185˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat application >50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    SP-2888® RG is an epoxy/polyurethane Hybrid coating based on “State of the Art” epoxy/urethane chemistry. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. SP-2888® RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion.


  • SP-2889 EPL

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 80˚C (176˚F)
    • Excellent adhesion to grit steel surfaces, Fusion Bond Epoxy (FEB), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE)
    • 100% Solids, Isocyanate free, environmentally friendly & safe
    • Good flexibility
    • Excellent chemical, abrasion and impact resistance
    • Easily applied by spray, brush or roller

    Description:

    A variation of SP-2888® RG. Epoxy / Polyurethane coating in which the pot life has been extended. This enables the Spray Grade to be applied with airless spray equipment. The performance properties are similar to SP-2888® RG. in which the urethane polymer is pre-bonded to the epoxy resin, rendering the coating “isocyanate free”. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of epoxy along with the added toughness and abrasion resistance of polyurethane. This environmentally friendly, 100% solids, & Isocyanate free two component coating system is available in Spray Grade and Brush Grade.


  • SP-3888 Brush

    Features:

    • Excellent resistance to cathodic disbonding up to 95˚C (203˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Pastic (FRP), Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat appliction > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A range of surface coatings based on “State of the Art” epoxy chemistry. It has excellent high temperature operating capability up to 95˚C (203˚F). Available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-3888 Cartridge

    Features:

    • Excellent resistance to cathodic disbonding up to 95˚C (203˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Pastic (FRP), Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat appliction > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A range of surface coatings based on “State of the Art” epoxy chemistry. It has excellent high temperature operating capability up to 95˚C (203˚F). Available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-3888 Fast Cure

    Features:

    • Excellent resistance to cathodic disbonding up to 95˚C (203˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), other epoxies and urethanes
    • Fast Cure, quick handling and quick return to service
    • Excellent chemical and water absorption resistance
    • Excellent wetting properties
    • High abrasion and impact resistance
    • Easily applied by cartridge dispensers
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A specially formulated version of SP-3888® based on modified Novolac epoxy chemistry. This product is designed for the repairs of damaged Fusion Bond Epoxy (FBE) and other liquid applied pipeline coatings where quick drying and quick handling are required. It has an excellent high operating temperature capability and cathodic disbondment resistance up to 95˚C (203˚F). Available in 50ml and 450ml Repair Cartridge.


  • SP-3888 Spray

    Features:

    • Excellent resistance to cathodic disbonding up to 95˚C (203˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Pastic (FRP), Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat appliction > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A range of surface coatings based on “State of the Art” epoxy chemistry. It has excellent high temperature operating capability up to 95˚C (203˚F). Available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-4888 Brush

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 80˚C (176˚F)
    • Excellent adhesion to grit blasted steel wet and dry surfaces, Fusion Bond Epoxy (FBE)
    • Isocyanate free
    • 100% solids, environmentally friendly & safe

    Description:

    A 100% solids, high performance epoxy coating developed specifically for application on wet or damp steel surfaces. In addition, this product may be applied on dry steel surfaces with equal corrosion protection properties. When applied as directed, it is an excellent corrosion protection coating with superior adhesion and resistance to cathodic disbonding at temperatures up to 80˚C (176˚F).


  • SP-7888

    Features:

    • Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE)
    • 100% solids
    • Excellent fresh and salt water resistance
    • Good flexibility
    • Good acid and abrasion resistance
    • High build one-coat application
    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600

    Description:

    A 100% solids, two-component high performance epoxy coating specifically formulated for use as a single coat interior lining and exterior coating system for potable water storage facilities, pipe and treatment plants. The 100% solids, high build, single coat applied coating cures to form a tough, durable, non-toxic, monolithic membrane with superior corrosion and water resistance.


  • SP-8888 Brush

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE) and HPCC
    • Service Temperature up to 150˚C (302˚F)
    • Excellent impact resistance; good flexibility
    • High build single coat application > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    A “State of the Art” two-component coating which has been specifically formulated for high temperature pipelines. This product cures to a highly cross-linked coating with an excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F). This environmentally friendly, 100% solids, & Isocyanate free two component coating system is available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-8888 Cartridge

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE) and HPCC
    • Service Temperature up to 150˚C (302˚F)
    • Excellent impact resistance; good flexibility
    • High build single coat application > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    A “State of the Art” two-component coating which has been specifically formulated for high temperature pipelines. This product cures to a highly cross-linked coating with an excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F). This environmentally friendly, 100% solids, & Isocyanate free two component coating system is available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-8888 Spray

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE) and HPCC
    • Service Temperature up to 150˚C (302˚F)
    • Excellent impact resistance; good flexibility
    • High build single coat application > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    A “State of the Art” two-component coating which has been specifically formulated for high temperature pipelines. This product cures to a highly cross-linked coating with an excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F). This environmentally friendly, 100% solids, & Isocyanate free two component coating system is available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-9888 Brush

    Features:

    • 100% solids
    • Excellent resistance to high temperature cathodic disbonding and autoclave conditions up to 150˚C (302˚F)
    • Excellent abrasion and impact resistance
    • High build in a single coat
    • Excellent Chemical Resistance
    • Good flexibility

    Description:

    A “State of the Art” two component coating system based on novolac chemistry. The environmentally friendly, 100% solids, two component coating system can be easily applied through spray, brush, or roller and cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.


  • SP-9888 Grout

    Features:

    • Superior wetting properties
    • Excellent adhesion to grit blasted steel
    • Excellent service temperature up to 95˚C (203˚F)
    • Excellent Cathodic Disbondment up to 95˚C (203˚F)
    • Excellent Impact Resistance
    • 100% solids, Isocyanate free, Environmentally friendly and safe
    • Easily applied by Brush/Roller/Spatula/Gloved Hand
    • High build single coat application up to 500 mils (13mm, ½”)

    Description:

    A multifunctional two-component ultra-high thixotropic coating that has been formulated based on State of the Art chemistry. This product has been uniquely designed for grouting and sealing purposes for tank floor and tank wall applications to be applied in conjunction with the SP-9888® coating series. Additionally, it can be used for grouting and sealing purposes for various pipeline applications.


  • SP-9888 HARC

    Features:

    • Super abrasion resistance
    • Excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F)
    • Good flexibility and impact resistance
    • Service temperature up to 150˚C (302˚F)
    • High build in a single coat
    • Excellent chemical resistance

    Description:

    The ultra-high abrasion resistance version of SP-9888®. The “State of the Art” novolac chemistry coupled with advanced ceramic materials provides superior abrasion resistance and excellent chemical, solvent and water immersion resistance.


  • SP-9888 Pipe Lining

    Features:

    • 100% solids
    • Excellent resistance to high temperature cathodic disbonding and autoclave conditions up to 150˚C (302˚F)
    • Excellent abrasion and impact resistance
    • High build in a single coat
    • Excellent Chemical Resistance
    • Good flexibility

    Description:

    A “State of the Art” two component coating system based on novolac chemistry. The environmentally friendly, 100% solids, two component coating system can be easily applied through spray, brush, roller and cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.


  • SP-9888 Spray

    Features:

    • 100% solids
    • Excellent resistance to high temperature cathodic disbonding and autoclave conditions up to 150˚C (302˚F)
    • Excellent abrasion and impact resistance
    • High build in a single coat
    • Excellent Chemical Resistance
    • Good flexibility

    Description:

    A “State of the Art” two component coating system based on novolac chemistry. The environmentally friendly, 100% solids, two component coating system can be easily applied through spray, brush, or roller and cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.


  • SP-9888 Stripe Coating

    Features:

    • Excellent chemical, acid, solvent and water resistance when topcoated with SP-9888® Tank Lining
    • Good recoatibility
    • Good flexibility
    • Excellent adhesion to steel
    • Easily applied by brush or spray
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A 100% solids, thin film, "State of the Art" two-component epoxy coating for use on tanks, pipes, steel structures, offshore platforms and subsea structures. This environmentally friendly, 100% solids, epoxy, two component coating system is available in Brush Grade, Spray Grade. No further solvent reduction is necessary.


  • Splash Zone A-788

    Features:

    • Designed for underwater and other wet applications
    • Can be applied up to 2" in thickness
    • Self-priming on most surfaces and over most generic types of coatings
    • Rapid cure characteristics
    • VOC compliant to current AIM regulations

    Description:

    Solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.


  • Steri-Coat 200 Gloss

    Features:

    • Class A Fire Rating
    • Meets SCAQMD Rule 1113 for VOC content
    • Low odor
    • Low VOC’s
    • Excellent adhesion
    • Excellent chemical & abrasion resistance
    • Excellent stain resistance
    • Anti-Microbial Agents are available as an option
    • Soap & water clean up
    • Also available in satin

    Description:

    Steri-Coat 200 offers the abrasion resistance and toughness inherent of urethanes. It also provides excellent resistance to UV discoloration and staining.


  • Steri-Coat 200 Satin

    Features:

    • Class A Fire Rating
    • Meets SCAQMD Rule 1113 for VOC content
    • Low odor
    • Low VOC’s
    • Excellent adhesion
    • Excellent chemical & abrasion resistance
    • Excellent stain resistance
    • Anti-Microbial Agents are available as an option
    • Soap & water clean up
    • Also available in satin

    Description:

    Steri-Coat 200 offers the abrasion resistance and toughness inherent of urethanes. It also provides excellent resistance to UV discoloration and staining.


  • Steri-Coat P

    Features:

    • Contributes toward satisfying credit for low emitting material under LEED 4.1
    • Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance Certificates Available Upon Request
    • Meets SCAQMD Rule 1113 for VOC content
    • Low emitting material
    • Low installation odor
    • Good Chemical & Abrasion Resistance
    • USDA & FDA Compliant
    • Anti-Microbial Agents are available as an option

    Description:

    This amine cured epoxy coating provides a very tough seamless coating system for high abuse areas. It is an excellent coating for areas requiring protection against the growth of mold, mildew, fungus and bacteria. The unique hybrid binder in Steri-Coat P provides high film integrity, and good chemical resistance required for prolonged substrate protection.


  • Steri-Cove Gel

    Features:

    • Contributes toward satisfying credit for low emitting material under LEED 4.1
    • Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance Certificates Available Upon Request
    • Meets SCAQMD Rule 1113 for VOC content
    • Low emitting material
    • Low VOC’s
    • Low installation odor

    Description:

    Steri-Cove Gel is an epoxy system designed for installation as integral cove base @ 1/16” to 1/4” thick. For use with Dudick Steri-Flor, Steri-Quartz, Steri-Flake systems, and other systems as recommended by Dudick.


  • Steri-Flor GP

    Features:

    • Contributes toward satisfying credit for low emitting material under LEED 4.1
    • Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance certification available upon request.
    • Meets SCAQMD Rule 1113 for VOC content
    • Contains 15% post industrial recycled product
    • Low VOCs
    • Low installation odor
    • Can be seeded for anti-skid surface
    • Stain resistance with excellent cleanability
    • Can be reinforced with fiberglass to increase crack bridging properties
    • USDA compliant

    Description:

    Steri-Flor GP is a self-leveling epoxy applied to achieve a strongly bonded monolithic topping with moderate chemical resistance and good physical and mechanical properties.


  • Steri-Flor T Bodycoat

    Features:

    • USDA compliant
    • High compressive strength
    • Low odor
    • Integral cove base and curb (optional)
    • Factory engineered aggregate blend for power and hand trowel applications
    • Anti-microbial agents are available as an option
    • Installed as supplied, is compliant with California SCAQMD Rule 1113 for VOC content
    • Contributes toward satisfying credit MR 5 and EQ 4.2 under LEED

    Description:

    A heavy-duty epoxy mortar basecoat. The total system provides a strongly bonded monolithic floor with excellent physical and mechanical properties.


  • Steri-Flor UV

    Features:

    • Contributes toward satisfying credit for low emitting material under LEED 4.1
    • Meets SCAQMD Rule 1113 for VOC content
    • Low viscosity - good wetting properties, approximately 500 cps mixed.
    • Low VOCs
    • Low installation odor, for use in occupied areas.
    • Stain resistance with excellent cleanability
    • USDA compliant

    Description:

    Steri-Flor UV is a multi-functional epoxy floor coating with increased UV stability compared to conventional epoxies. It provides good resistance to common chemicals and daily traffic and may be used as a base/color coat, receiving coat, or grout coat for decorative broadcast floors.


  • Steri-Prime

    Features:

    • Meets most VOC Requirements
    • Low Odor
    • User Friendly
    • Tolerant to moisture vapor transmission (2)

    Description:

    A high solids epoxy primer for concrete. Designed to increase adhesion and reduce the potential for outgassing in high performance flooring or containment systems.


  • Steri-Prime DTO

    Features:

    • Meets most VOC Requirements
    • Distinct, But Low Odor
    • User Friendly
    • Increases adhesion to oil saturated concrete that has been surface cleaned.
    • Tolerant to moisture vapor transmission (2 / 2)

    Description:

    A high solids epoxy primer for concrete that has previously been exposed to oils, grease, or fats. Specially designed to increase adhesion and reduce the potential for outgassing in high performance flooring or containment systems.


  • Steri-Prime WB

    Features: